Pedestrian gate kits
The wider member of the boxed ALU 40 gate family: a 6x6 horizontal aluminum gate kit with the DIY 6' x 6' frame kit, 16 slats pre-cut to 62in. and 7/8 plugs for a single-swing gate.
Coming soon · please confirm availability before ordering.
Coming soon — please confirm availability with us before ordering.
$914.92
When a 4 ft gate is not enough – for wheelbarrows, garden equipment or simply a more generous entrance – this 6×6 horizontal aluminum gate kit steps up to the 6' x 6' DIY frame. The box contains the frame kit, 16 ALU 40 slats already cut to 62in. and the 7/8 plugs that close the slat ends, so the whole gate leaf arrives as one package.
The slats run horizontally with a 3/8" gap between them. That spacing gives a semi-private screen that still lets breeze and some light through, and it lines up visually with horizontal slat fencing. The aluminum is 6063-T6 with AAMA 2604 super-durable powder coating.
ALU 40 black slat pedestrian gate project
The 6' x 6' frame kit is listed with a vertical gate frame and cap, top and bottom horizontal gate frame, 2 heavy duty hinges and a gate stopper, and it works with the Universal Slat Adapter.
The ALU 40 profile is a 4-inch slat, so a 6 ft gate reads as a few bold horizontal bands rather than many thin lines. With the slats pre-cut to length for this frame, spacing stays consistent from top to bottom without on-site measuring. Aluminum does not rot, warp or attract termites, and the powder-coated surface only needs occasional cleaning.
The slat wall is 0.047, the same thickness used in the 4×6 version, and the 7/8 plugs close the open slat ends so the finished edge looks tidy and keeps debris out. Because the slat count is identical across both ALU 40 sizes, the spacing and overall look stay consistent if you install a 4 ft gate on one side of the house and a 6 ft gate on the other.
If you already own a compatible 6' x 6' frame and only need infill, the ALU 40 gate slat box (16pcs, 62in) is listed separately.
No posts are included, which lets you choose the right mounting method for your site. The listed options are:
For a gate between two walls, the 2x2in Hinge Post & L-Side Post Kit is designed for wall-to-wall installation. For in-ground work, choose between the 3in HD post for concrete footing and the 4in HD post for a standalone post. A wider gate puts more demand on the hinge side, so if you are unsure which post suits your opening, ask our team before ordering. The 2-way post is noted in the price list for gates up to 3 feet wide or wall mount, which makes it a poor match for a 6 ft leaf unless our team confirms otherwise.
This kit is listed in Black, Bronze and White, and all three finishes are currently marked as coming soon. Please confirm availability and timing with our team before scheduling your project. If you need a gate sooner, compare the 4×6 ALU 40 gate kit or browse the full range of aluminum gates.
Measure the finished opening and the space the posts will occupy, decide whether each side fixes to a wall or to a footing, and check any local code requirements for gates. Think about swing direction too: a 6 ft leaf needs clear ground to open fully, so check for steps, planters or slopes in its path. Plan the latch at the same time, because latch hardware is not part of this kit.
Assemble following the included instructions. If your opening falls between sizes, or you are not sure whether to use one wide gate or two narrower ones, send the measurements to our team for advice.
Real projects
Completed installations by Aluglobus Aluminum Systems using this system. Sizes, layouts and accessories vary by project.
Watch
Installation, product and factory videos from Aluglobus Aluminum Systems.
Specifications
Check sizes, material and configuration against your project before ordering.
Complete the system
The boxed DIY pedestrian gate kits and the parts sold for them: 2×2 in. hinge posts and L-side posts for wall installation, and the gate slat boxes in ALU 40 and ALU 60 T&G.
Measure the opening between the two walls (these posts are for wall installation).
Choose the kit size (4×6 or 6×6 ft) and the slat style (ALU 40 with a gap, or ALU 60 T&G with no gap).
Choose the color offered for the kit.
Add hinge post / L-side post sets and slat boxes only if you are building or replacing parts.
Confirm availability for colors marked coming soon.
FAQ
Send your measurements and photos. Our team will help you choose the right system and parts.
All three finishes of this kit are currently listed as coming soon. Please confirm availability and timing with our team before ordering.
The (NEW) DIY Only Gate Frame Kit 6' x 6', 16 ALU 40 slats (0.047 wall) cut to 62in., and 7/8 plugs. Posts and latches are ordered separately.
It uses the 6' x 6' frame kit and longer 62in. slats; the slat count (16pcs), profile and 3/8" gap are the same.
Yes. The same 16-piece, 62in. ALU 40 gate slat box is listed on its own if you already have a compatible 6' x 6' frame.
Use the Hinge Post + L-Side Post kit between walls, the 3.15 post for wall or concrete footing, or a 3in or 4in HD post for concrete footing or standalone installs. Confirm with our team if you are unsure.
Ready when you are
Order online or send your project details for a factory-direct quote.
Limited Promotional Inventory
CONTRACTORS ONLY
Send us your information and our team will help you check available woodgrain colors, profiles and current promotional inventory.
Factory-direct pricing. Contractor-ready systems. Limited-time promo.
No stacking with other discounts.
Discover all our aluminum fences, gates, and cladding with full specifications and pricing. Enter your email below, and we’ll send the complete magazine straight to your inbox.
Log in