Posts and accessories
A black powder-coated 6063-T6 aluminum base plate made for the 2.75 2-way post, listed for pedestrian posts, fence posts and wall toppers.
$29.15
The 2.75 2-way Post Baseplate from Aluglobus Aluminum Systems is the aluminum base made for the 2.75 2-way post. It lets you surface-mount the post instead of setting it in a concrete footing, and its listed usage covers pedestrian posts, fence posts and wall topper posts. Like the post, it is 6063-T6 aluminum finished in black AAMA 2604 super-durable powder coating, so the base and post match.
For gate positions, note that the pedestrian gate post options list the 2.75 2-way post for wall mount only, for gates up to 3 feet wide. For wider or free-standing gates, ask our team about the square post options.
The price list also offers a 2.75 2-way Post Steel Base plate with 1.25 Steel, shown in the shop as the steel base plate for the 2.75 post. Both are listed for the same post. If you are unsure which suits your project, send our team your layout and mounting surface.
No fasteners are listed with this aluminum fence post base plate. The price list offers the 3/8" x 3-3/4" wedge anchor, listed as the fastener for fence base plates to concrete, and #14×2" stainless steel screws, listed as the fastener for the 2-way post. Choose anchors suited to your surface, follow the included instructions and local code, and confirm the full fastener set with our team.
The base plate pairs with the (Fence Box) 2.75 2-way post kit or the end post kit, which supply the post, press cap, L-brackets and bottom spacers. Check your post spacing and opening widths before ordering, and count one 2.75 2-way post base plate for each surface-mounted post. Mount on a sound, level surface so the post stands plumb and the slats run true, and if some posts go into footings while others sit on a wall, list each position separately so nothing is missed.
Material & finish
2.75 2-way Post Baseplate – Black is made from aluminum 6063-t6, finished with AAMA 2604 Super-Durable Powder Coating in black.
6063-T6 is an architectural aluminum alloy made for extruded profiles. It gives clean, consistent shapes and takes a powder coating evenly, which is why it is widely used for fences, gates and other exterior building products.
AAMA 2604 is the American Architectural Manufacturers Association specification for high-performance organic coatings, powder coatings included, on aluminum extrusions. It sets test requirements for outdoor color and gloss retention, chalking and corrosion resistance.
Material
Aluminum 6063-T6
Finish
AAMA 2604 Super-Durable Powder Coating
Color
Black
Where it is used
Fits: 2.75 2-way Post. Listed use: Pedestrian Post, Fence Post & Wall Topper.
Ordering
Specifications
Check sizes, material and configuration against your project before ordering.
Complete the system
Fence parts built around the 2.75 in. 2-way aluminum post: posts and boxed post kits, post spacers, caps and base plates, plus the ALU 40 and ALU 60 T&G slats and top rails used with them.
Measure the fence run and decide the post spacing (8 ft sections for the kits).
Pick the slat: ALU 40 with a 1/2 in. gap or ALU 60 T&G.
Choose the spacer size that sets the gap you want.
Choose how posts are installed: in concrete or on a base plate (anchors sold separately).
Add caps, top rails and screws, then confirm the color for every part.
FAQ
Send your measurements and photos. Our team will help you choose the right system and parts.
It is listed for the 2.75 2-way post, used as a pedestrian post, fence post or wall topper post.
No fasteners are listed with the base plate. The price list offers a 3/8" x 3-3/4" Wedge Anchor for fence base plates to concrete and #14x2" stainless steel screws for the 2-way post; confirm the full fastener set with our team.
Both are listed for the 2.75 2-way post. The steel version is described as a 2.75 2-way Post Steel Base plate with 1.25 Steel. Ask our team which suits your gate or fence load.
This listing is Black only. Ask our team if you need another color.
In the pedestrian gate post options, the 2.75 2-way post is listed for wall mount only, for gates up to 3 feet wide. For other gate setups, confirm with our team.
Ready when you are
Order online or send your project details for a factory-direct quote.
Limited Promotional Inventory
CONTRACTORS ONLY
Send us your information and our team will help you check available woodgrain colors, profiles and current promotional inventory.
Factory-direct pricing. Contractor-ready systems. Limited-time promo.
No stacking with other discounts.
Discover all our aluminum fences, gates, and cladding with full specifications and pricing. Enter your email below, and we’ll send the complete magazine straight to your inbox.
Log in