Posts and accessories
A pack of 30 powder-coated aluminum spacers that set a 1/2 gap between slats in the 2.75 2-way post, the most open spacing in the Gen 3.0 range. Black or Bronze.
$12.53
These 1/2 inch aluminum fence slat spacers from Aluglobus Aluminum Systems sit between the slats inside the 2.75 2-way post and set a 1/2 gap from slat to slat. It is the widest of the three Gen 3.0 spacer packs, so the finished fence lets through more light and air than a 1/4 or 3/8 layout. Each pack holds 30 pieces.
The (Box) Alu 40 8ft x 6ft H 2way post fence kit, GAP 1/2" lists one (Box) 1/2 Spacers – 30pcs pack among its inclusions. Order extra packs here when you add sections to that layout, or when you are assembling your own run from the separate post kit and slat boxes. The Alu 60 T&G 8ft x 6ft kit is also labeled GAP 1/2", but its inclusions list a top rail rather than a spacer pack, so ask our team before adding spacers to a T&G fence.
Pick one gap and use it across the whole run so the slat lines stay consistent from panel to panel. Confirm your slat's minimum gap before ordering, count slat rows and posts to estimate the number of packs, and ask our team to check the total if you are building a custom layout.
Spacers are not included with the (Fence Box) 2.75 2-way post kit. For a tighter spacing, compare the 3/8 in. spacer pack.
Material & finish
(Pack of 30pcs) 2.75 2-way Post Spacers 1/2 in. is made from aluminum 6063-t6, finished with AAMA 2604 Super-Durable Powder Coating in black, bronze.
6063-T6 is an architectural aluminum alloy made for extruded profiles. It gives clean, consistent shapes and takes a powder coating evenly, which is why it is widely used for fences, gates and other exterior building products.
AAMA 2604 is the American Architectural Manufacturers Association specification for high-performance organic coatings, powder coatings included, on aluminum extrusions. It sets test requirements for outdoor color and gloss retention, chalking and corrosion resistance.
Material
Aluminum 6063-T6
Finish
AAMA 2604 Super-Durable Powder Coating
Color
Black, Bronze
Where it is used
Fits: 2.75 2-way post (Gen 3.0). Listed use: (Box) Alu 40 8ft x 6ft H 2way post Fence Kit – GAP 1/2".
Ordering
Specifications
Check sizes, material and configuration against your project before ordering.
Complete the system
Fence parts built around the 2.75 in. 2-way aluminum post: posts and boxed post kits, post spacers, caps and base plates, plus the ALU 40 and ALU 60 T&G slats and top rails used with them.
Measure the fence run and decide the post spacing (8 ft sections for the kits).
Pick the slat: ALU 40 with a 1/2 in. gap or ALU 60 T&G.
Choose the spacer size that sets the gap you want.
Choose how posts are installed: in concrete or on a base plate (anchors sold separately).
Add caps, top rails and screws, then confirm the color for every part.
FAQ
Send your measurements and photos. Our team will help you choose the right system and parts.
A 1/2 in. gap between slats in the 2.75 2-way post; the price list gives the usage as 2-way post spacer 1/2 gap.
Yes. The (Box) Alu 40 8ft x 6ft H 2way post Fence Kit - GAP 1/2" lists (Box) 1/2 Spacers - 30pcs among its inclusions.
It is the widest of the three Gen 3.0 packs, which come in 1/4 in., 3/8 in. and 1/2 in. A wider gap gives a more open look with more light and air between slats.
No. The 1/2 in. pack is listed in Black and Bronze only; the 3/8 in. pack is the one listed in White.
Ready when you are
Order online or send your project details for a factory-direct quote.
Limited Promotional Inventory
CONTRACTORS ONLY
Send us your information and our team will help you check available woodgrain colors, profiles and current promotional inventory.
Factory-direct pricing. Contractor-ready systems. Limited-time promo.
No stacking with other discounts.
Discover all our aluminum fences, gates, and cladding with full specifications and pricing. Enter your email below, and we’ll send the complete magazine straight to your inbox.
Log in