Posts and accessories
A pack of 30 powder-coated aluminum spacers that set a 3/8 gap between slats in the 2.75 2-way post. The only spacer pack offered in Black, Bronze and White.
$12.13
These 3/8 inch aluminum fence slat spacers from Aluglobus Aluminum Systems sit between the slats inside the 2.75 2-way post and set a 3/8 gap from one slat to the next. The price list describes them simply as a 2-way post spacer, 3/8 gap. Each pack holds 30 pieces.
3/8 in. is the middle of the three Gen 3.0 spacer packs, between the tighter 1/4 in. and the more open 1/2 in. It also matches the minimum gap the price list notes for the boxed Alu 40 8 ft slats (Minimum Gap 3/8 in.), making it the closest spacing listed for those slats. Earlier Gen 2.0 kits such as the Alu 20 6ft x 6ft and Alu 40 LD 8ft x 6ft fence kits were also specified at GAP 3/8".
The number of spacers depends on how many slats you stack and how many posts carry them. Count your slat rows and post positions, then check the total against the pack size of 30. If you are unsure, send our team your layout and we will confirm the count.
Spacers are not included in the (Fence Box) 2.75 2-way post kit. Need a different spacing? See the 1/4 in. spacer pack or the 1/2 in. spacer pack.
Material & finish
(Pack of 30pcs) 2.75 2-way Post Spacers 3/8 in. is made from aluminum 6063-t6, finished with AAMA 2604 Super-Durable Powder Coating in black, bronze, white.
6063-T6 is an architectural aluminum alloy made for extruded profiles. It gives clean, consistent shapes and takes a powder coating evenly, which is why it is widely used for fences, gates and other exterior building products.
AAMA 2604 is the American Architectural Manufacturers Association specification for high-performance organic coatings, powder coatings included, on aluminum extrusions. It sets test requirements for outdoor color and gloss retention, chalking and corrosion resistance.
Material
Aluminum 6063-T6
Finish
AAMA 2604 Super-Durable Powder Coating
Color
Black, Bronze, White
Where it is used
Fits: 2.75 2-way post (Gen 3.0).
Ordering
Specifications
Check sizes, material and configuration against your project before ordering.
Complete the system
Fence parts built around the 2.75 in. 2-way aluminum post: posts and boxed post kits, post spacers, caps and base plates, plus the ALU 40 and ALU 60 T&G slats and top rails used with them.
Measure the fence run and decide the post spacing (8 ft sections for the kits).
Pick the slat: ALU 40 with a 1/2 in. gap or ALU 60 T&G.
Choose the spacer size that sets the gap you want.
Choose how posts are installed: in concrete or on a base plate (anchors sold separately).
Add caps, top rails and screws, then confirm the color for every part.
FAQ
Send your measurements and photos. Our team will help you choose the right system and parts.
The price list gives the usage as 2-way post spacer 3/8 gap, so each spacer sets a 3/8 in. gap between slats in the 2.75 2-way post.
Each pack holds 30 pieces in one color.
Yes, 3/8 in. meets the minimum gap the price list notes for those slats (Minimum Gap 3/8 in.). Confirm with our team if you are using a different slat.
Black, Bronze and White. The 1/4 in. and 1/2 in. packs are listed in Black and Bronze only.
Ready when you are
Order online or send your project details for a factory-direct quote.
Limited Promotional Inventory
CONTRACTORS ONLY
Send us your information and our team will help you check available woodgrain colors, profiles and current promotional inventory.
Factory-direct pricing. Contractor-ready systems. Limited-time promo.
No stacking with other discounts.
Discover all our aluminum fences, gates, and cladding with full specifications and pricing. Enter your email below, and we’ll send the complete magazine straight to your inbox.
Log in