(Gate Slat Box) ALU 60 T&G Slat - 11pcs (62in)

6×6 tongue and groove gate slats, pre-cut to 62 in.

This gate slat box contains 11 ALU 60 T&G slats cut to 62 in. It is the infill specified for 6 ft x 6 ft DIY pedestrian gate kits from Aluglobus Aluminum Systems. These 6×6 tongue and groove gate slats interlock edge to edge, closing the gate into one continuous privacy panel with no gap between boards.

A 6 ft wide walk gate is a common choice for moving mowers, wheelbarrows and bins through a side yard. Using slats already cut to 62 in. keeps every board the same length and saves you from trimming full-length fence stock on site.

Box contents and specifications

The box contains slats only; the gate frame, hinges and posts are sold separately or as part of a gate kit.

Why ALU 60 T&G for a privacy gate

The 6 in. ALU 60 profile gives the gate a broad, calm face with fewer horizontal lines than narrower slats. The tongue-and-groove edge is what delivers the no-gap result, which suits gates on property lines, pool areas and utility spaces where full screening matters.

• 6063-T6 aluminum does not rot or warp and needs no staining.
• AAMA 2604 super-durable powder coating in Black, Bronze or White.
• Same slat family as ALU 60 T&G fence panels, so the gate can match the run.

Pick the correct length

Gate slat boxes are cut to suit a specific frame width. For a 4 ft x 6 ft gate, use the ALU 60 T&G gate slat box, 39 in.. If you want a slatted look with light and airflow between boards, the ALU 40 gate slat box, 62 in. uses 4 in. slats with a minimum 3/8 in. gap. Measure your opening and confirm your frame size before ordering; if you are unsure, confirm with our team.

Complete the 6×6 gate

The Alu 60 T&G 6×6 ft. DIY pedestrian gate kit combines this slat box with the 6′ x 6′ DIY-only gate frame kit and 7/8 plugs. Prefer to pick parts yourself? Start with a 6′ x 6′ DIY gate frame kit and add the post option that fits a wall or concrete-footing installation.