Slats and rails
A boxed set of 11 ALU 60 tongue-and-groove slats cut to 39 in. for 4 ft x 6 ft DIY pedestrian gates. The interlocking 6 in. profile closes up with no gap for full privacy.
$282.28
This box holds 11 ALU 60 T&G slats cut to 39 in., the length used in our 4 ft x 6 ft DIY pedestrian gate kits. These 4×6 tongue and groove gate slats lock into one another as you stack them in the frame, so the finished panel reads as a solid, gap-free privacy surface rather than a row of separate boards.
Because the slats arrive pre-cut to gate length, you skip the measuring and cutting you would face with full-length fence stock. That makes the box a practical way to match a new gate to an ALU 60 T&G fence line, or to rebuild the infill of an existing 4 ft wide DIY gate frame.
ALU 60 T&G black pedestrian gate project
Frame, hinges, stoppers and posts are not included in this box.
ALU 60 is the 6 in. slat in the Aluglobus Aluminum Systems range, and the T&G version is designed so each slat seats into the one below it. The price list describes the result simply: full privacy, no gap. That suits side-yard gates, pool equipment enclosures and trash-can areas where you want the view fully blocked.
Aluglobus sells four gate slat boxes. Pick by gate width first, then by the look you want:
Before ordering, measure the finished opening and confirm the frame you are using is a 4 ft x 6 ft DIY gate frame. If you are working with a different frame, confirm fit with our team.
If you are starting from scratch, the Alu 60 T&G 4×6 ft. DIY pedestrian gate kit bundles this slat box with the DIY-only gate frame kit and 7/8 plugs. You can also pair the box with a separate 4' x 6' DIY gate frame kit and choose your own post option. Browse all aluminum gates and gate parts to complete the opening.
Material & finish
(Gate Slat Box) ALU 60 T&G Slat – 11pcs (39in) is made from aluminum 6063-t6, finished with AAMA 2604 Super-Durable Powder Coating in black, bronze, white.
6063-T6 is an architectural aluminum alloy made for extruded profiles. It gives clean, consistent shapes and takes a powder coating evenly, which is why it is widely used for fences, gates and other exterior building products.
AAMA 2604 is the American Architectural Manufacturers Association specification for high-performance organic coatings, powder coatings included, on aluminum extrusions. It sets test requirements for outdoor color and gloss retention, chalking and corrosion resistance.
Material
Aluminum 6063-T6
Finish
AAMA 2604 Super-Durable Powder Coating
Color
Black, Bronze, White
Wall thickness
0.047 in.
Where it is used
Listed use: Slats for 4 ft x 6 ft DIY gate kits.
Ordering
Real projects
Completed installations by Aluglobus Aluminum Systems using this system. Sizes, layouts and accessories vary by project.
Watch
Installation, product and factory videos from Aluglobus Aluminum Systems.
Specifications
Check sizes, material and configuration against your project before ordering.
Complete the system
The boxed DIY pedestrian gate kits and the parts sold for them: 2×2 in. hinge posts and L-side posts for wall installation, and the gate slat boxes in ALU 40 and ALU 60 T&G.
Measure the opening between the two walls (these posts are for wall installation).
Choose the kit size (4×6 or 6×6 ft) and the slat style (ALU 40 with a gap, or ALU 60 T&G with no gap).
Choose the color offered for the kit.
Add hinge post / L-side post sets and slat boxes only if you are building or replacing parts.
Confirm availability for colors marked coming soon.
FAQ
Send your measurements and photos. Our team will help you choose the right system and parts.
The 39 in. box is the slat box used in our 4 ft x 6 ft DIY pedestrian gate kits. For a 6 ft x 6 ft gate, choose the 62 in. ALU 60 T&G gate slat box instead.
No. The ALU 60 T&G profile interlocks tongue-into-groove, so the finished gate is full privacy with no gap between slats.
No. This box contains 11 slats only. The frame, hinges and hardware come with a DIY gate frame kit, or you can buy the complete boxed gate kit.
The box is listed in Black, Bronze and White powder coat. Match it to your frame and fence color; if a color is not showing as available, confirm with our team.
The price list identifies these gate slats as ALU 60 with a 0.047 in. wall, made from 6063-T6 aluminum.
Ready when you are
Order online or send your project details for a factory-direct quote.
Limited Promotional Inventory
CONTRACTORS ONLY
Send us your information and our team will help you check available woodgrain colors, profiles and current promotional inventory.
Factory-direct pricing. Contractor-ready systems. Limited-time promo.
No stacking with other discounts.
Discover all our aluminum fences, gates, and cladding with full specifications and pricing. Enter your email below, and we’ll send the complete magazine straight to your inbox.
Log in