Aluminum systems
The look of a timber privacy gate without the upkeep: a 6x6 wood look aluminum gate kit with 11 ALU 60 T&G 6ft wood-look slats, a black DIY 6' x 6' frame kit, 8 black 7/8 plugs and an additional HD hinge.
$1,383.80
Timber gates look great for a season or two, then start to grey, twist and need sanding and staining. This 6×6 wood look aluminum gate kit keeps the warm wood appearance but builds it from aluminum. It pairs a black DIY gate frame with ALU 60 tongue-and-groove slats in a wood-look finish, so the finished single-swing gate has a solid, no-gap face with the character of wood boards.
The black frame gives a crisp outline around the wood-look infill – a combination that suits modern homes, courtyards and side-yard entrances. Components are 6063-T6 aluminum with AAMA 2604 super-durable powder coating.
ALU 60 T&G wood grain driveway gate project
The 6' x 6' frame kit is listed with a vertical gate frame, vertical gate frame cap, top and bottom horizontal gate frame, 2 heavy duty hinges and a gate stopper. This kit adds one more HD hinge on top of those.
ALU 60 T&G is a 6-inch slat that interlocks along its edges, so there is no gap between boards and no line of sight through the gate. The wood-look finish is applied to aluminum, not timber, which means:
Unlike the boxed gate kits, the slats here are supplied as 6ft lengths. Follow the included instructions when fitting them to the frame, and ask our team if you have questions about sizing.
Posts are sold separately so you can match the mounting to your site. The price list offers:
Between two walls, the 2x2in Hinge Post & L-Side Post Kit is built for wall-to-wall installation. For in-ground posts, the 3×3 in. HD square post is listed for concrete footing and the 4in HD post as a standalone option. A 6 ft solid gate is a larger leaf, so confirm the post choice with our team if you are unsure.
Measure the finished opening and allow for the posts before comparing against the 6 ft x 6 ft kit. Check your local code for gate requirements, and install following the included instructions. If you prefer a solid colour in the same profile, compare the Alu 60 T&G 6×6 gate kit, or browse all aluminum gates.
ALU 60 T&G wood grain fence project
A wood-look aluminum gate gives you the appearance homeowners want at the entrance while removing the maintenance that usually comes with it. Once installed, occasional cleaning is all the powder-coated finish needs, and the aluminum will not rust the way steel hardware and frames can.
It is also a practical choice when the gate sits next to other wood-look elements such as cladding, a pergola or a wood-look fence: the aluminum slats hold a consistent tone over time instead of weathering unevenly the way neighbouring timber boards can. The black frame, plugs and hinges tie the gate to black posts and hardware elsewhere on the property.
This kit is listed with a black frame and wood-look slats; no other colour combinations are listed for it. If you are matching an existing wood-look product, ask our team for a finish comparison before ordering.
Material & finish
Alu 60 T&G Wood look 6×6 ft. DIY Pedestrian Gate Kit – Single Swing – No Gap is made from aluminum 6063-t6, finished with AAMA 2604 super-durable powder coating.
6063-T6 is an architectural aluminum alloy made for extruded profiles. It gives clean, consistent shapes and takes a powder coating evenly, which is why it is widely used for fences, gates and other exterior building products.
AAMA 2604 is the American Architectural Manufacturers Association specification for high-performance organic coatings, powder coatings included, on aluminum extrusions. It sets test requirements for outdoor color and gloss retention, chalking and corrosion resistance.
Material
Aluminum 6063-T6
Finish
AAMA 2604 super-durable powder coating
Real projects
Completed installations by Aluglobus Aluminum Systems using this system. Sizes, layouts and accessories vary by project.
Watch
Installation, product and factory videos from Aluglobus Aluminum Systems.
Specifications
Check sizes, material and configuration against your project before ordering.
Complete the system
Universal DIY pedestrian gate kits and the matching DIY gate frame kits. The frames are designed to go together without welding and take ALU 20, ALU 40 or ALU 50/60 T&G infill depending on the kit.
Measure the opening and check it is a wall-to-wall installation, or ask about the HD post option.
Choose the size (4×6, 6×6 or 6×8 ft frame) and the infill: ALU 20, ALU 40 or T&G.
Choose black or wood grain where offered.
Add a latch, cane bolt or stopper if your layout needs one.
Send photos of the opening if you are unsure about hinge side or swing direction.
FAQ
Send your measurements and photos. Our team will help you choose the right system and parts.
The (NEW) DIY Only Gate Frame Kit 6' x 6' in black, 11pcs Alu 60 T&G 6ft slats in wood look, 8pcs 7/8 Plug Black, and an additional HD hinge.
No. The slats are aluminum with a wood-look finish, so they do not rot, split or need staining like timber.
The kit lists an additional HD hinge on top of the frame kit's hinges. For hinge placement, follow the included instructions or confirm with our team.
The slats are listed as 6ft lengths rather than pre-cut gate slats, so check the included instructions for fitting them to the frame, and confirm with our team if anything is unclear.
Pick from Hinge Post + L-Side Post (wall to wall), 3.15 post, 2-way (wall mount only), 3in HD post (concrete footing) or 4in HD post (standalone).
Ready when you are
Order online or send your project details for a factory-direct quote.
Limited Promotional Inventory
CONTRACTORS ONLY
Send us your information and our team will help you check available woodgrain colors, profiles and current promotional inventory.
Factory-direct pricing. Contractor-ready systems. Limited-time promo.
No stacking with other discounts.
Discover all our aluminum fences, gates, and cladding with full specifications and pricing. Enter your email below, and we’ll send the complete magazine straight to your inbox.
Log in