alucap 1800x | 2.75 Flat Aluminum Post Cap | Aluglobusfence.com

2.75 2-way Post 8 ft – Black + Cap + Cover

Q: How deep should the post be installed?

There is no single footing depth for every project. Required embedment depends on fence height, panel type, wind exposure, soil conditions, post spacing and local structural requirements.

$15.97 – $117.72

Aluglobus Aluminum Fence Components

2.75″ aluminum 2-way post designed for straight fence runs where panels
connect from opposite sides. The 8 ft profile combines strong structural
support with a clean black architectural finish and includes the matching
cap and cover for a complete installation.

Profile
2.75″

Length
8 ft

Configuration
2-Way Post

Color
Black

Material
6063-T6 Aluminum

Coating
AAMA 2604 Super-Durable Powder Coat

Primary Use
Straight-Line Fence Connections

Corrosion Resistance
Rust-Resistant Aluminum Construction

Included
Post + Matching Cap + Cover

Finish
Black Architectural Powder Coat

2-way configuration:
designed for line-post locations where fence panels continue in two
opposite directions. Confirm panel system and installation requirements
before ordering.

Add to cart

Buy Now

Categories: Aluminum Fences - DIY Fence Kit Post, Aluminum Gates, Build your own DIY Gates, Individual Profiles, Posts

Description

Product Description

2.75″ Post System · 8 ft · Black

The standard-length line post for clean, straight aluminum fence runs.

The 2.75″ 2-Way Aluminum Post is an 8-foot architectural line post designed to support compatible fence sections on opposing sides. Manufactured from 6063-T6 aluminum and finished in black with an AAMA 2604 super-durable powder-coat specification, it gives residential and commercial fence systems a clean support profile without the maintenance problems associated with wood rot or iron-oxide rust.

Choose post & cap options View specifications

8 ft supplied length

Black 2-way post · line-post configuration

Profile2.75″ aluminum post

Length8 ft

Configuration2-way straight-run post

Alloy6063-T6 aluminum

FinishBlack · AAMA 2604

What “2-way” means

Two connection sides. One repeating line-post condition.

The post is designed for straight fence runs where one panel or rail system approaches from one side and the next continues from the opposite side. The 2-way geometry lets both sections share the same post while preserving a clean fence line.

Use it as a line postIdeal for repeating structural points along a continuous straight fence run.

Connect panels on opposing sidesThe same post supports compatible fence sections to the left and right.

Keep corners and gates separateA 90-degree corner, fence termination or gate hinge point may require a different post geometry or heavier structural support.

Fence panel Fence panel

Top-view concept
2-way straight-run connection

Why choose the 8 ft version

Right-sized stock for standard fence projects without paying for unnecessary extrusion length.

Eight-foot posts are practical when the finished fence height and footing plan fit within a standard-length extrusion. Compared with the 11-foot version, this SKU is focused on everyday fence layouts where extra cut-off stock is not required.

Standard residential planning

Useful for many common backyard, side-yard, pool-area and perimeter fence projects when the approved post embedment and finished height fit the 8-foot profile.

Less excess material

When the project does not need the additional length of an 11-foot extrusion, the 8-foot post can reduce unnecessary field cutting and surplus material.

Easier handling

Shorter extrusions are generally easier to stage, move and manage on residential jobsites while still providing the required above-grade and below-grade length when properly specified.

Repeatable line-post use

The 2-way configuration is designed to repeat along straight runs, helping crews standardize the main post condition throughout the fence layout.

Important: 8 ft is the supplied extrusion length, not a universal finished fence height. Confirm the required above-grade height and footing or mounting design before ordering or cutting posts.

Configure the visible post detail

Choose the structural post and the cap style your project needs.

The live grouped product currently offers the 8-foot black post plus two black cap choices. A matching 6.5-foot black post cover is available separately for projects that need exposed channel finishing.

Grouped option

2.75″ 2-Way Post · 8 ft · Black

The main structural line-post extrusion for compatible straight-run fence sections.

Grouped option

Black Convex Cap

A rounded finishing cap for the top of the 2.75-inch post when a softer architectural profile is preferred.

Grouped option

Black Flat Cap + Screws

A low-profile top finish that keeps the post visually simple and contemporary.

2.75 inch black aluminum fence post channel cover

Available separately

6.5 ft Black Post Cover

Finishes exposed channel areas after compatible fence components are installed. Add it separately when the project requires a covered visible channel.

Ordering clarity: the grouped selector on this SKU currently lists the post, black convex cap and black flat cap with screws. The black 6.5-foot post cover is a separate Aluglobus accessory, so add it separately if your layout needs it.

Choose grouped options

Technical specifications

A compact specification set built around strength, alignment and exterior durability.

The key buying questions are straightforward: profile size, extrusion length, connection geometry, alloy, coating and accessory fit.

Project fit: exact rail, slat, T&G, composite-style board and fastening compatibility should be verified against the selected Aluglobus fence system before quantities are finalized.

Product type: 2-way aluminum fence line post
Nominal profile: 2.75 inches
Supplied length: 8 ft
Material: 6063-T6 architectural aluminum
Finish: Black architectural powder coat
Coating specification: AAMA 2604 super-durable powder coating
Configuration: Two-way connection for straight-line fence runs
Panel connection: Compatible fence sections connect on opposing sides
Corrosion behavior: Aluminum does not develop iron-oxide rust like steel or iron
Grouped cap options: Black convex cap or black flat cap with screws
Post cover: Matching 6.5 ft black 2-way post cover available separately
Applications: Residential boundaries, pool-area fencing, gardens, commercial perimeters and modern architectural fence runs

Black architectural finish

Black works because it can either disappear into the fence or sharpen the entire composition.

On modern aluminum systems, black is more than a default color. It can create a continuous monochromatic fence, frame wood-look infill, contrast lighter architecture, or visually recede behind privacy panels.

AAMA 2604 coating specificationAAMA 2604 defines performance requirements and test procedures for high-performance organic coatings on architectural aluminum extrusions and panels.

Factory-applied finishPowder coating gives the post a uniform exterior surface before it reaches the jobsite, avoiding the inconsistency of field painting.

Low-maintenance aluminum substrateThe post does not develop iron-oxide rust like steel and does not need the recurring stain or sealer cycles associated with wood posts.

Matching accessory languageBlack caps and a matching black channel cover keep the support detail visually coordinated instead of mixing unfinished accessory colors.

Black powder coat · architectural exterior finish

Applications

Use the 8 ft 2-way post where a straight fence run needs a clean repeating support.

The profile is designed to sit between compatible fence sections, making it one of the primary repeating posts in a typical straight-line layout.

Residential

Backyard & side-yard fences

Support modern aluminum fence panels along property boundaries where a standard 8-foot post length fits the approved installation plan.

Pool area

Architectural pool fencing

Use the post within an approved pool-fence design when the complete system satisfies applicable barrier and local code requirements.

Privacy

Full and semi-private runs

Coordinate the post with compatible slat, T&G or other privacy-system components for straight sections of the fence.

Commercial

Property perimeters

Build repeatable straight-line sections around offices, multi-family properties, hospitality areas and light-commercial sites.

Coastal

Humid & salt-air projects

Aluminum avoids iron-oxide rust and is widely used where contractors want a low-maintenance exterior metal fence system.

Design-led

Black architectural fencing

Use black posts to coordinate with black rails and panels or to frame wood-look and composite-style infill with a crisp modern edge.

What the aluminum-fence market values

Corrosion resistance, powder coating and clean accessories are no longer extras. They are the baseline for a premium aluminum system.

Major aluminum-fence manufacturers compete on low maintenance, durable alloy, powder-coated finishes and finished post accessories because the post is expected to perform structurally without becoming a recurring maintenance item.

What matters	2.75″ Black Aluminum	Typical Wood Post	Typical Steel Post
Iron-oxide rust	No	Not applicable	Possible when protective coating is damaged or inadequate
Rot / insect decay	No structural wood	Possible over time	Not applicable
Exterior finish	AAMA 2604 powder-coat specification	Paint, stain or sealer commonly used	Paint, galvanizing or powder coat commonly used
Recurring refinishing	Low	Often required	Depends on coating and environment
Accessory integration	Matching convex cap, flat cap and cover options	Varies by system	Varies by manufacturer
Architectural appearance	Clean black extrusion with concealed system channels	Natural or painted wood appearance	Industrial or architectural depending on system

See the post in the finished architecture

The strongest visual result comes when posts, rails and panels share one clean rhythm.

These Aluglobus fence applications show why post spacing and alignment matter. Long horizontal lines make even small post errors visible, so the support system needs to be laid out before panel installation begins.

modern black aluminum fence with straight aligned posts

Straight post alignment lets the horizontal fence lines stay dominant

modern black aluminum fence panel and post detail

Clean black panel-to-post transition

full privacy aluminum fence supported by architectural posts

Full-privacy system application

architectural aluminum fence installed at residential property

Architectural fence system in a finished property setting

Installation planning

The post line determines whether the finished fence looks engineered or improvised.

Before concrete is poured or hardware is tightened, establish the complete fence geometry. Post spacing, elevation, plumb and structural mounting should be checked as a system rather than one post at a time.

Before installation: verify the property line, panel dimensions, post spacing, finished fence height, grade changes, corner and gate conditions, footing or base design and local requirements.

Map every post condition

Identify repeating 2-way line posts separately from ends, corners, gates and specialty structural supports so the correct profiles are ordered.

Establish post spacing from the actual system

Use the selected Aluglobus panel, rail or board dimensions to establish center-to-center or opening dimensions. Do not assume one universal spacing for every fence system.

Confirm finished elevations

Set a laser, level or string line before cutting the 8-foot extrusion. Account for slope, step transitions and the designed above-grade fence height.

Prepare the structural mounting condition

Use the concrete footing, engineered base or other approved mounting condition required by fence height, wind exposure, soil, local requirements and the project design.

Set each post plumb and in line

Check vertical plumb in both directions and sight the full run before the footing or structural fasteners are finalized.

Install fence sections, then finish the post

Attach the compatible fence components, verify alignment, then add the selected cap and any separately purchased channel cover required by the visible post condition.

Cap versus cover

Two small finishing parts solve two different problems.

A cap closes the top of the post. A channel cover finishes an exposed vertical channel. They are not interchangeable, and not every installation requires the same accessory combination.

Convex capCloses the post top with a rounded architectural shape.

Flat cap with screwsCreates a low-profile top finish with a more geometric appearance.

6.5 ft black post coverCloses a visible unused channel along the post after compatible fence sections are installed. It is currently sold separately from this grouped SKU.

Match the accessory to the layoutA line post surrounded by fence components may expose different channel areas than an end or specialty condition, so verify what remains visible before ordering covers.

Vertical channel cover

Post-top cap

Before ordering quantities

Count the fence conditions, not just the total number of posts.

A material list gets expensive when every vertical support is treated as the same part. Map the project first, then order the right profile for each location.

Line posts

Count each repeating straight-run location that needs the 2-way profile.

End posts

Separate fence terminations because they may require a different connection geometry or finishing condition.

Corner posts

Mark every change in fence direction so a 90-degree or specialty post can be specified correctly.

Gate supports

Do not automatically substitute a standard line post where hinge loads or gate hardware require a heavier support.

Caps

Choose convex or flat top treatment for each visible post that needs a finished top.

Channel covers

Count only the exposed channel lengths that require covers instead of assuming one cover automatically belongs to every post.

Fence-system compatibility

Confirm the rail, slat, T&G or composite-style system before ordering post quantities and connection hardware.

8 ft versus longer stock

If the approved fence height, grade or footing plan needs more extrusion length, move to the longer post option rather than forcing an 8-foot profile into the wrong application.

Frequently asked questions

What to know before ordering the 2.75″ 2-way 8 ft black post.

The right answer depends on the fence system, post location and installation plan. These are the questions worth resolving before the material reaches the site.

What is a 2-way aluminum fence post used for?

A 2-way post is primarily a line post for a continuous straight fence run. Compatible fence sections connect to opposing sides of the post so adjacent panels can share one structural support while maintaining alignment.

Is this post 8 feet long?

Yes. This SKU is the 8-foot black version. Eight feet is the supplied extrusion length, not a guaranteed finished fence height. The final above-grade height depends on the approved footing or mounting method and project design.

What material and finish does the post use?

The product is listed as 6063-T6 aluminum with a black AAMA 2604 super-durable powder-coat specification. Aluminum does not develop iron-oxide rust like steel or iron.

Does the product include both a cap and a cover?

The live grouped selector currently offers the 8-foot black post, a black convex cap, and a black flat cap with screws as selectable grouped items. A matching 6.5-foot black 2-way post cover is available separately and should be added only when the project needs exposed channel finishing.

Which cap should I choose?

Choose the convex cap for a rounded top profile or the flat cap with screws for a lower-profile geometric finish. The cap choice is primarily an appearance and finishing decision, provided it matches the 2.75-inch post.

Can I use this post at a 90-degree corner?

The 2-way post is intended primarily for straight fence runs. A 90-degree corner changes the connection geometry, so use the corner-post or project-specific solution recommended for the selected fence system.

Does every 8 ft post need to be set in concrete?

Many in-ground fence installations use concrete footings, but the correct mounting method depends on the fence design and site. Some projects may use engineered base conditions or other approved structural mounting. Confirm the installation method before cutting or setting the post.

How deep should the post be installed?

There is no single footing depth that is correct for every project. Required embedment depends on fence height, panel type, wind exposure, soil conditions, post spacing and local structural requirements.

When should I choose the 11 ft version instead?

Choose longer stock when the project requires greater finished fence height, deeper embedment, more grade adjustment or additional field-cutting flexibility than an 8-foot extrusion can provide.

Factory-direct aluminum profiles

Building a full fence run? Count the line posts, corners, ends and gate supports before you place the order.

Select the 8-foot post and preferred cap from the grouped options, then add the matching black channel cover separately if the finished layout requires it.

Choose post & cap options Request project support

Aluglobus Aluminum Systems · Individual aluminum profiles · Fence systems · Gate systems · Nationwide supply

Trusted by investors, architects, homeowners and contractors

Watch Plug ✔

@watchplug

"I couldn't be happier with the fence. From the moment it went up, it completely transformed my backyard. The sleek design without visible posts gives it such a modern, high-end look. It's like having a piece of art around my home. I also love that it's fire-resistant, which gives me peace of mind living in this area. Definitely worth every penny!"

Mike

Home Owner

Daymond John

CEO, Entrepreneur & Investor

DW Design & Build ✔

@dannywangdesign

"We're honored to be recommended by Danny Wang Design, a premier contractor known for exceptional outdoor living spaces. In our latest collaboration, Danny created a stunning backyard and entrusted us with the gate and fence system. We're proud to be his trusted partner for quality and reliability."

Jim Monahan

★★★★★

"AluGlobus was extremely helpful with my order, answering all my questions and delivering everything to Texas in perfect condition. The products were well-packed in a solid wood crate, and excellent quality. I'm so glad I found them online. Highly recommended. I'll be buying from them again. Thanks to everyone who made it happen!"

David

Customer

Service Department

Mercedes Benz Engineer

Valley One Gates & Access

"We use Aluglobus 100% with every fence/gate job we have. As a contractor I can say they are working very hard and their product is the highest quality I can find and the best price. We're very happy working with them! Our experience working with them is always top notch."

22 July 2025

	2.75 2-way Post 8 ft - Black$117.72	2.75 2-way Post 8 ft - Black quantity
	2.75 2-way Post Convex Cap - Black$15.97	2.75 2-way Post Convex Cap - Black quantity
	2.75 2-way Flat Cap with screws - Black$18.21	2.75 2-way Flat Cap with screws - Black quantity

Shopping cart

Search

2.75 2-way Post 8 ft – Black + Cap + Cover

2.75 2-way Post 8 ft – Black + Cap + Cover

Description

Product Description

The standard-length line post for clean, straight aluminum fence runs.

Two connection sides. One repeating line-post condition.

Right-sized stock for standard fence projects without paying for unnecessary extrusion length.

Standard residential planning

Less excess material

Easier handling

Repeatable line-post use

Choose the structural post and the cap style your project needs.

2.75″ 2-Way Post · 8 ft · Black

Black Convex Cap

Black Flat Cap + Screws

6.5 ft Black Post Cover

A compact specification set built around strength, alignment and exterior durability.

Black works because it can either disappear into the fence or sharpen the entire composition.

Use the 8 ft 2-way post where a straight fence run needs a clean repeating support.

Backyard & side-yard fences

Architectural pool fencing

Full and semi-private runs

Property perimeters

Humid & salt-air projects

Black architectural fencing

Corrosion resistance, powder coating and clean accessories are no longer extras. They are the baseline for a premium aluminum system.

The strongest visual result comes when posts, rails and panels share one clean rhythm.

The post line determines whether the finished fence looks engineered or improvised.

Map every post condition

Establish post spacing from the actual system

Confirm finished elevations

Prepare the structural mounting condition

Set each post plumb and in line

Install fence sections, then finish the post

Two small finishing parts solve two different problems.

Count the fence conditions, not just the total number of posts.

Line posts

End posts

Corner posts

Gate supports

Caps

Channel covers

Fence-system compatibility

8 ft versus longer stock

What to know before ordering the 2.75″ 2-way 8 ft black post.

Building a full fence run? Count the line posts, corners, ends and gate supports before you place the order.

FREE DIGITAL MAGAZINE

Wholesale buyers get $150 OFF their order for a limited time.

Request a call

Leave your request