01Complete aluminum gate frameThe Universal DIY frame creates the single-swing gate structure without requiring welded field fabrication.
02Wide lock-side frameThe wider side frame is designed to accommodate most U.S.-size lock hardware so the latch and handle can be planned into the gate.
03Top and bottom frameFactory-prepared top and bottom frame components complete the Universal DIY gate perimeter.
05Receiver L-stopper side componentThe receiver-side component supports clean wall-to-wall closure and lock-side planning.
065″ HD support hinge · Qty 1One heavy-duty 5-inch support hinge is included. For true self-closing operation, a compatible hydraulic spring is recommended and sold separately.
0716 black ALU40 slatsSixteen 4″ × 6′ powder-coated 6063-T6 aluminum slats create the horizontal infill.
08What is not includedConcrete footing, lock hardware, hydraulic self-closing spring and installation tools are not included with the standard kit.
09Optional posts and capsPost and cap options are selected separately when the project requires them. Concrete-footing conditions require the correct HD post configuration.
Universal gate frameComplete aluminum frame with wide lock side, top and bottom frame components for the 6′ × 6′ single-swing gate.
Receiver and striker sideGate T-stopper and receiver L-stopper components support the finished closing condition and lock-side alignment.
ALU40 slat packageSixteen 4″ × 6′ black powder-coated 6063-T6 aluminum slats are listed with this kit.
5″ HD support hingeOne heavy-duty support hinge is included. A hydraulic closer or spring is a separate selection when true self-closing operation is required.
Optional HD post upgradeThe standard gate is wall-to-wall. Projects that require concrete footing must use the correct HD post upgrade instead of assuming posts are included.
Optional posts and capsAdditional posts and matching caps can be selected separately from the product-page options when the project condition requires them.
Front pedestrian entriesCreate a substantial modern entrance with six-foot height and broad horizontal aluminum lines.
Side-yard gatesUse the six-foot-wide pedestrian leaf where the property needs more passage width than a narrow walkway gate.
Courtyards and entrywaysCoordinate the black gate with contemporary walls, fence systems and exterior architecture.
Privacy-oriented entriesThe 4-inch horizontal ALU40 layout creates a strong architectural rhythm for private residential spaces.
Light-commercial pedestrian accessA practical aluminum option for pedestrian-only openings with suitable structural mounting conditions.
Coastal and humid climatesAluminum does not develop iron-oxide rust like steel and is well suited to environments where corrosion maintenance is a concern.
01Verify the openingMeasure the opening at the top, middle and bottom and confirm the wall-to-wall mounting surfaces are plumb, solid and suitable for the gate hardware.
02Lay out the Universal framePlace the frame components on a protected flat surface, confirm orientation and keep the assembly square as the frame comes together.
03Install the 16 ALU40 slatsInstall the sixteen 4-inch horizontal slats consistently according to the supplied system instructions and ordered gate configuration.
04Set hinge hardwarePosition the 5-inch HD support hinge for the required swing direction and verify the hinge-side structure can support the assembled leaf.
05Set the receiver sideAlign the receiver-side components, T-stopper, L-stopper and selected lock hardware for clean closure.
06Align and testCheck clearances, fasteners, latch engagement and smooth swing through the full arc before regular use.
01Measure wall to wallConfirm the finished opening at multiple heights and account for hinge, latch and receiver-side clearances.
02Confirm the listed sizeThis SKU is supplied as a 6′ × 6′ gate. Do not assume the frame should be cut to an arbitrary size without confirming the correct configuration with Aluglobus.
03Confirm swing directionPlan the hinge side and swing direction around clearance, traffic flow and the actual opening.
04Plan lock hardwareConfirm the selected latch or lock body and required clearances before finalizing the lock-side setup.
05Check self-closing needsIf true self-closing operation is required, select the appropriate hydraulic spring or compatible closing hardware separately.
06Confirm mounting conditionThe standard configuration is wall-to-wall. Concrete-footing projects require the correct HD post upgrade before installation.