01Universal gate framePre-engineered aluminum frame components create the structure of the pedestrian gate without requiring welded fabrication.
02Pre-cut ALU20 slatsHorizontal ALU20 infill is factory-cut for the gate configuration so assembly can be completed with a consistent slat rhythm.
03Assembly hardwareFrame and slat components are prepared for assembly with coordinated fasteners and connections used to secure the structure and infill.
04Lock-ready side frameThe Universal DIY family is designed around common U.S.-size lock hardware so access hardware can be planned into the finished gate.
05Optional posts and hingesPosts, hinge systems and latch hardware are project-dependent add-ons. Confirm the mounting condition before ordering the complete package.
06Assembly guidanceAssembly guidance covers preparation, frame assembly, slats, hinges, side posts and final cleanup.
01Residential side gatesA compact 4-foot-wide pedestrian opening for side yards and everyday property access.
02Backyard accessHorizontal aluminum slats create a coordinated modern entry point alongside aluminum fence systems.
03Patio and garden entriesLow-maintenance aluminum makes the system practical for frequently used exterior pedestrian openings.
04Pool-area projectsThe gate may be incorporated into pool-area layouts only when the complete barrier, hinges, self-closing hardware, latch location and clearances satisfy the applicable local code.
05Townhomes and developmentsThe repeatable DIY system can support coordinated pedestrian gates across light-commercial or multi-unit projects.
06Fence-system coordinationThe universal design is intended to integrate with ALU20 aluminum fence layouts and compatible post/hardware conditions.
01PreparationOrganize all materials in a clean workspace to avoid damage or misplacement before assembly begins.
02Frame assemblyConnect the universal gate frame with stainless-steel screws while keeping the corners square and secure.
03Slat installationCut or insert the ALU20 slats into the frame grooves as required, establish the intended spacing and secure the slats with the specified screws.
04Hinge installationAttach the selected hinges to the side post and gate frame, then verify alignment and smooth swing movement.
05Posts and gap coversAttach the side posts and gap-cover components appropriate to the wall-to-wall installation condition.
06Final touchesInstall flat caps, inspect all fasteners and connections, verify clearances and clean the finished aluminum surfaces.
01Measure wall to wallVerify the finished opening at the top, middle and bottom and confirm that the gate can be mounted to the intended side conditions.
02Confirm post strategyCompatible post options include 2×2, 2.75×2.75 and 3×3 configurations. A concrete-footing condition requires the HD post upgrade rather than the standard wall-to-wall setup.
03Select hingesChoose the correct bolt-on or weld-on hinge arrangement for the post, desired swing direction and any self-closing requirement.
04Plan the lockConfirm the latch or lock body, backset and handle clearance before drilling or final assembly so the wide side frame can be used correctly.
05Choose the finishBlack is the standard color. Anthracite grey, white, bronze and woodgrain options may be available for qualifying custom orders.
06Use HD for larger gatesFor openings over 6 feet wide, move to an ALU40 or ALU60 gate platform when additional structural capacity is required.