Slats and rails
A full box of sixteen 8 ft Alu 40 slats, the slat count for one 6 ft x 8 ft DIY fence section. Listed in Black, Bronze and White, currently marked coming soon.
Coming soon · please confirm availability before ordering.
Coming soon — please confirm availability with us before ordering.
$600.86
This aluminum fence slats 16 pack holds sixteen 8 ft Alu 40 slats, the number used in one 6 ft high by 8 ft wide DIY fence section. Buying a full box means the slats for each section arrive together in one finish, rather than being counted out piece by piece, which makes ordering several identical sections straightforward.
The box is listed in Black, Bronze and White, and all three are currently marked coming soon. Check with our team for timing before planning an install date around it.
ALU 40 black slat fence project
The 4-inch face gives each panel wide, calm horizontal bands with fewer visible lines than narrow slat profiles. Aluminum will not rot, warp or need staining, and the super-durable powder-coated surface only needs an occasional wash with water and a mild cleaner.
The box contains slats only. To build a section you also need a 2.75 2-way post kit, which supplies the post, press cap, L-brackets and bottom spacers, plus a pack of slat spacers to set the gap. Alu 40 slats are listed with a minimum gap of 3/8"; the 1/2" spacer pack gives a slightly more open look.
If you would rather order the whole section at once, the Alu 40 8×6 fence kit bundles this slat box with the post kit and 1/2" spacers.
Before ordering, confirm your section count, post layout and gap choice. Remember that the first section of a run and every end or gate opening need their own post. Our team can check quantities for runs with ends, corners or gates, and the aluminum fence category lists matching posts and accessories.
Material & finish
(Box) ALU 40 Slat 0.047 THK x 8ft (16pcs) is made from aluminum 6063-t6, finished with AAMA 2604 Super-Durable Powder Coating in black, bronze, white (listed as coming soon).
6063-T6 is an architectural aluminum alloy made for extruded profiles. It gives clean, consistent shapes and takes a powder coating evenly, which is why it is widely used for fences, gates and other exterior building products.
AAMA 2604 is the American Architectural Manufacturers Association specification for high-performance organic coatings, powder coatings included, on aluminum extrusions. It sets test requirements for outdoor color and gloss retention, chalking and corrosion resistance.
Material
Aluminum 6063-T6
Finish
AAMA 2604 Super-Durable Powder Coating
Color
Black, Bronze, White (listed as coming soon)
Where it is used
Listed use: Slats for 6 ft x 8 ft DIY fence kits.
Ordering
Real projects
Completed installations by Aluglobus Aluminum Systems using this system. Sizes, layouts and accessories vary by project.
Watch
Installation, product and factory videos from Aluglobus Aluminum Systems.
Specifications
Check sizes, material and configuration against your project before ordering.
Complete the system
Fence parts built around the 2.75 in. 2-way aluminum post: posts and boxed post kits, post spacers, caps and base plates, plus the ALU 40 and ALU 60 T&G slats and top rails used with them.
Measure the fence run and decide the post spacing (8 ft sections for the kits).
Pick the slat: ALU 40 with a 1/2 in. gap or ALU 60 T&G.
Choose the spacer size that sets the gap you want.
Choose how posts are installed: in concrete or on a base plate (anchors sold separately).
Add caps, top rails and screws, then confirm the color for every part.
FAQ
Send your measurements and photos. Our team will help you choose the right system and parts.
The box holds 16 slats, which is the slat count used in one 8 ft wide x 6 ft high Alu 40 fence kit section.
No. This box contains slats only. Pair it with a 2.75 2-way post kit and a spacer pack, or order the complete Alu 40 8x6 fence kit.
Alu 40 slats are listed with a minimum gap of 3/8". Spacer packs are sold in 3/8" and 1/2".
All three colors are listed as coming soon. Contact our team for current availability, or buy single slats from box in the meantime.
Ready when you are
Order online or send your project details for a factory-direct quote.
Limited Promotional Inventory
CONTRACTORS ONLY
Send us your information and our team will help you check available woodgrain colors, profiles and current promotional inventory.
Factory-direct pricing. Contractor-ready systems. Limited-time promo.
No stacking with other discounts.
Discover all our aluminum fences, gates, and cladding with full specifications and pricing. Enter your email below, and we’ll send the complete magazine straight to your inbox.
Log in