Fence kits
A boxed privacy fence kit for one 8 ft wide x 6 ft high section: eleven interlocking Alu 60 T&G slats, a 2.75 2-way post kit and an 8 ft top rail, in Black, Bronze or White.
Coming soon · please confirm availability before ordering.
Coming soon — please confirm availability with us before ordering.
$805.55
This tongue and groove aluminum fence kit 8×6 builds one 8 ft wide by 6 ft high section of Alu 60 T&G privacy fence. The 6-inch slats interlock edge to edge, so the finished panel reads as a solid, seamless wall of aluminum rather than a set of separate boards. It is the kit to choose when screening a patio, pool area or neighboring window matters more than airflow.
Everything for the section comes as three boxed items: the slats, a 2.75 2-way post kit, and a matching 8 ft top rail. Pick Black, Bronze or White and every component arrives in the same AAMA 2604 super-durable powder coating.
ALU 60 T&G black fence project
Inside the 2-way post kit:
The post kit is listed as made in USA. No separate spacer pack appears in this kit's inclusions; if a specific gap between slats matters for your design, confirm it with our team before ordering.
Alu 60 T&G is a 6-inch aluminum slat with a 0.047" wall and a tongue-and-groove edge. Because each slat locks into the next, the stack stays aligned along the full 8 ft length and there are no sight lines between boards. The profile is extruded from 6063-T6 aluminum, so it will not rot, warp or need sealing, and the powder-coated surface only needs occasional washing.
Choose a color to suit the house: Black gives a crisp, contemporary outline, Bronze warms up brick and natural stone, and White keeps a bright, clean look against light siding.
One kit equals one 8 ft section with one post. A run of sections needs one additional post to close the line, and each end, corner or gate opening needs its own post. For terminating a run, the 2.75 2-way End Post Kit adds a cover strip for the blank side of the post.
For an entry in the same style, the Alu 60 T&G 4×6 DIY pedestrian gate kit uses the same tongue-and-groove slat, so fence and gate line up visually. Loose Alu 60 T&G slats and 8 ft top rails are also available if you need a spare for a repair or a short section, and the aluminum fence category lists posts and accessories in matching finishes.
Ordering a tongue and groove aluminum fence kit 8×6 per section cuts down on ordering mistakes: you count sections, add end posts, and every panel arrives with the same parts. Homeowners get a predictable DIY project, and installers get repeatable components that stage easily on site. If you are unsure whether this or the more open Alu 40 slat kit suits your yard, our team can talk through privacy, light and wind before you order.
Real projects
Completed installations by Aluglobus Aluminum Systems using this system. Sizes, layouts and accessories vary by project.
Watch
Installation, product and factory videos from Aluglobus Aluminum Systems.
Specifications
Check sizes, material and configuration against your project before ordering.
Complete the system
Fence parts built around the 2.75 in. 2-way aluminum post: posts and boxed post kits, post spacers, caps and base plates, plus the ALU 40 and ALU 60 T&G slats and top rails used with them.
Measure the fence run and decide the post spacing (8 ft sections for the kits).
Pick the slat: ALU 40 with a 1/2 in. gap or ALU 60 T&G.
Choose the spacer size that sets the gap you want.
Choose how posts are installed: in concrete or on a base plate (anchors sold separately).
Add caps, top rails and screws, then confirm the color for every part.
FAQ
Send your measurements and photos. Our team will help you choose the right system and parts.
One box of 11 Alu 60 T&G slats at 8 ft, one 2.75 2-way post kit 8 ft, and one 8 ft top rail. The post kit contains the post, press cap, 14 L-brackets, 4 bottom spacers with screw bush and 8 #12x2" self-tapping screws.
The top rail caps the upper edge of the tongue-and-groove slat stack for a finished look; the price list lists this rail for Alu 60 T&G, Alu Plexi and vinyl infill.
No spacer pack is listed in this kit's inclusions, unlike the Alu 40 kit. Please confirm the finished slat spacing with our team before ordering.
Each kit includes one 2-way post. Add one more post to close a straight run, plus a post at every end or gate opening; the 2.75 2-way End Post Kit is designed for ends.
Yes. Alu 60 T&G slats and 8 ft top rails are sold individually.
Ready when you are
Order online or send your project details for a factory-direct quote.
Limited Promotional Inventory
CONTRACTORS ONLY
Send us your information and our team will help you check available woodgrain colors, profiles and current promotional inventory.
Factory-direct pricing. Contractor-ready systems. Limited-time promo.
No stacking with other discounts.
Discover all our aluminum fences, gates, and cladding with full specifications and pricing. Enter your email below, and we’ll send the complete magazine straight to your inbox.
Log in