Untitled design (41) | H.D DIY Plexiglass Modern Aluminum Pedestrian Gate | Aluglobusfence.com

Alu Plexiglass HD PAD GATE plexiglass 4’x6′ door (no plexiglass)

$1,764.36

Aluglobus Heavy-Duty PAD Gate System

Aluminum 4×6 Heavy-Duty PAD Gate Frame

The Aluglobus 4×6 Heavy-Duty PAD Gate is designed as a versatile aluminum
gate frame for projects that require a custom center panel. Instead of
locking the project into one infill material, the frame allows the final
gate design to be completed with a compatible plexiglass, wood, metal,
or other suitable panel selected for the application.

The aluminum frame provides a clean structural perimeter with strong
resistance to exterior corrosion, while the open-center design gives
contractors, designers, and property owners greater flexibility to
customize the finished appearance.

Gate Size
4′ × 6′

System
Heavy-Duty PAD

Frame Material
Aluminum

Center Panel
Not Included

Important: Plexiglass is not included.

This product is the aluminum PAD gate frame system. The center infill
panel must be selected and supplied separately.

Product Advantages

Key Features

Heavy-Duty Aluminum Frame
A dedicated aluminum gate structure provides a strong perimeter for
the selected center infill panel.
Choose Your Own Infill
Configure the gate with compatible plexiglass, wood, metal, or another
suitable panel depending on the desired architectural style.
Corrosion-Resistant Construction
Aluminum will not rust like conventional steel and is well suited for
demanding exterior environments.
Custom Design Flexibility
The open-center PAD configuration allows the finished appearance to be
adapted to different properties, materials, and design concepts.
Architectural Finish
The powder-coated aluminum frame creates a clean finished appearance
while helping protect the exterior aluminum surface.
Modern Gate Appearance
Clean frame lines and customizable infill make the system suitable for
modern, contemporary, and custom architectural entrances.

System Details

One Frame. Multiple Design Options.

Frame Material

Aluminum construction provides the primary gate structure and offers
excellent resistance to rust and exterior corrosion.

Plexiglass Option

A compatible clear plexiglass panel can be added
to create a transparent, modern gate design.
Plexiglass is not included with this kit.

Wood Option

A compatible wood panel may be used when the design calls for
a warmer or more traditional center infill appearance.

Metal Option

Compatible metal infill can be used to create a more solid,
industrial, or fully metallic architectural appearance.

Finish

Powder-coated aluminum finish designed to provide a clean
architectural appearance and additional exterior surface protection.

Installation

Supplied as a coordinated gate frame system designed to simplify
installation compared with fabricating a custom gate frame from
unrelated components.

Product Specifications

Specifications

Gate Height
4 ft

Gate Width
6 ft

System Type
Heavy-Duty PAD

Frame
Aluminum

Infill
Customer Selected

Plexiglass Included
No

Plexiglass-ready, not plexiglass-included:
this product provides the aluminum gate frame. A plexiglass panel may be
used as the center infill, but it must be ordered or supplied separately.

Custom infill flexibility:
the selected panel material, thickness, dimensions, attachment method,
weight, and compatibility should be confirmed before installation.

Fire-performance note:
the final gate assembly may use plexiglass, wood, metal, or another infill.
Fire or combustibility characteristics of the finished gate depend on the
selected center material and should not be assumed from the aluminum frame alone.

Installation planning:
verify finished opening dimensions, structural mounting surfaces, hinge
support, swing clearance, lock hardware, infill dimensions, and total
finished gate weight before installation.

Add to cart

Buy Now

Categories: Aluminum Gates, Aluminum Gates - Alu Plexiglass, Gates, Pedestrian Single Swing Gate

Description

Product Description

Heavy-Duty Plexiglass-Ready Gate System

4×6 HD PAD GATE. Heavy-duty aluminum frame, Plexiglass not included.

This pedestrian single-swing gate package is built around a 6063-T6 aluminum Heavy-Duty frame and hardware set, giving contractors and project owners a strong architectural base while keeping the final infill choice open.

Nominal 4 ft × 6 ftHeavy-DutySingle Swing6063-T6 AluminumPlexiglass Not Included

Go to product options Review my opening

Heavy-Duty aluminum gate frame, buyer-selected infill

ConfigurationPedestrian single swing

Nominal Size4 ft × 6 ft

Frame6063-T6 aluminum

InfillNot included

SystemHD PAD GATE

Product Overview

A Heavy-Duty gate frame for projects that need infill flexibility.

The HD PAD GATE Plexiglass 4×6 package is designed as a robust aluminum pedestrian gate framework ready for a separately selected Plexiglass or compatible infill. The key purchasing point is simple: this specific kit does not include the Plexiglass panel.

Heavy-Duty frame

The current listing uses 4-inch Heavy-Duty gate frame stock and 6-inch Heavy-Duty hinges rather than a Universal DIY wall-to-wall frame package.

Choose the infill

Because the panel is not included, the final acrylic or other infill can be selected around the project’s transparency, privacy, appearance, and code requirements.

Contractor-ready planning

Hinge-side support, post selection, clearances, latch location, and final infill retention should be reviewed before field fabrication.

Benefits

Why this 4×6 frame system works for architectural pedestrian entries.

Corrosion-resistant aluminum: suited to exterior projects where rust from ordinary steel can become a maintenance issue.
Heavy-Duty framing: the gate package is built around the HD PAD GATE framing concept, not a lightweight decorative panel.
Flexible appearance: the open frame lets the project team choose the final Plexiglass or other compatible infill separately.
Low-maintenance frame: the powder-coated aluminum frame does not require wood-style staining or routine repainting.
Factory-direct system: designed for contractors, builders, designers, and serious residential projects.

A frame-first gate matters.

A pedestrian gate is a moving assembly. The frame carries hinge loads, keeps the leaf square, and gives the infill a controlled perimeter. Final performance still depends on the opening, support condition, fabrication, hardware, and installation.

A gate without a frame is just a fence with hinges.

Applications

Built for pedestrian openings where structure and design both matter.

Side-yard entries

For residential passages that need a substantial framed gate and a clean architectural look.

Front walk gates

For pedestrian entrances where a transparent, frosted, tinted, or custom infill may be selected later.

Multi-family + light commercial

Useful where repeated, coordinated gate styling and contractor-grade planning are important.

Pool-barrier note: Do not assume that visibility alone makes a gate pool compliant. Height, opening limitations, latch location, self-closing behavior, climbability, and local code requirements must be reviewed for the complete installed assembly.

Design & Durability

6063-T6 aluminum frame, Heavy-Duty hardware concept, buyer-selected infill.

The frame is the structural starting point. The current product description identifies 6063-T6 aluminum and a powder-coated exterior finish, while the kit itself is intentionally sold without the Plexiglass panel.

20′ 4″ HD gate frame stockFabrication stock for the Heavy-Duty gate frame. The 20 ft length is not the finished installed gate dimension.

Inner corner bracketUsed to reinforce frame corner connections.

Channel kitSupports the project’s infill-retention strategy.

3″ aluminum capListed component for the gate package.

6″ HD hingesHeavy-Duty hinge hardware listed for the gate.

6′ L-shape gate stopperClosure/stop component listed with the system.

Fasteners#10×1″, #12×2″ black, and #10×3/4″ screws are listed on the product page.

6′ top rail + post optionsThe listing includes a 6 ft top rail and identifies multiple post options. Confirm the selected support package before fabrication.

Plexiglass is not part of this SKU. Confirm panel material, thickness, edge clearance, expansion allowance, retention method, and finish before ordering the separate infill.

Gate System Video

See how Aluglobus approaches framed aluminum gate systems.

Use the video as system context, then match the opening, support, hardware, and infill requirements to this specific Heavy-Duty 4×6 package.

Material + Infill Planning

The aluminum frame and the final infill are two different material decisions.

Component	What to know
Aluminum frame	6063-T6 aluminum is identified for the gate frame. Aluminum is corrosion resistant and the metal substrate is non-combustible.
Powder-coated finish	The product description identifies a powder-coated exterior finish. Clean with mild soap and water and avoid abrasive methods that can damage the coating.
Plexiglass / acrylic	Not included. Acrylic is a polymer and is not equivalent to a non-combustible aluminum infill.
Alternative infill	Any substitute panel needs compatible thickness, edge clearance, retention, wind-load, and site-condition review before installation.
Wildfire / Zone Zero	The aluminum frame can support a non-combustible material strategy, but compliance must be evaluated for the complete finished gate, including the selected infill, coatings, hardware, clearances, adjacent materials, and local AHJ requirements.

Installation & Buying Guide

Measure first. Confirm support. Then fabricate the Heavy-Duty leaf.

1. MeasureRecord the finished opening width, target gate height, and required operating clearances.

2. Confirm supportIdentify the hinge-side wall, post, column, or upgraded support condition before loading it with the gate leaf.

3. Plan the infillSelect the panel material and thickness before finalizing channels, retention, and clearances.

4. Assemble squareFabricate on a flat surface and verify diagonals before hanging the gate.

5. Hang + adjustSet hinge alignment, stopper, latch/lock hardware, and final swing clearance.

Automation: do not add an operator by assumption. Gate weight, hinge loads, stops, support, operator geometry, and access-control requirements need a separate review.

Frequently Asked Questions

What to confirm before ordering the 4×6 HD Plexiglass-ready gate.

Is the 4×6 size a finished opening size?

The product is sold as a nominal 4 ft × 6 ft pedestrian gate kit. Finished opening dimensions, hinge-side support, swing clearance, and hardware clearances should be confirmed before fabrication or installation.

Does this kit include Plexiglass?

No. This Heavy-Duty 4×6 listing is supplied without the Plexiglass infill. The aluminum gate frame and listed gate components are provided so the project can use a separately selected compatible infill.

What material is the gate frame made from?

The product description identifies the gate frame as 6063-T6 aluminum. Aluminum provides corrosion resistance and a strong strength-to-weight ratio for exterior gate applications.

What parts are listed with this Heavy-Duty gate kit?

The current product listing names 20 ft of 4-inch Heavy-Duty gate frame stock, inner corner bracket, channel kit, 3-inch aluminum cap, 6-inch Heavy-Duty hinges, 6 ft L-shape gate stopper, listed screw sizes, a 6 ft top rail, and post options. Confirm exact quantities and selected post configuration before cutting or installation.

Can I add clear, frosted, or tinted Plexiglass later?

The gate is designed as a Plexiglass-ready frame system, but the infill is not included. Panel material, thickness, edge treatment, retention method, and clearances should be confirmed for the final project before ordering the infill.

Is this the same as the Universal DIY Plexiglass gate?

No. This is the Heavy-Duty HD PAD GATE configuration. It uses the Heavy-Duty framing and hardware concept shown on the current product listing and should not be treated as the Universal DIY wall-to-wall frame package.

Can this gate be automated?

Automation is not assumed. Operator loads, hinge configuration, gate weight, support conditions, stops, access-control hardware, and local requirements need a separate project-specific review before adding an operator.

Is the complete finished gate non-combustible?

The supplied aluminum frame is a non-combustible metal substrate. The final gate assembly depends on the infill you add. If acrylic or another polymer infill is installed, the complete assembly should not be represented as an all-aluminum non-combustible gate. Local wildfire, pool, egress, and building requirements must be checked for the finished installation.

Project Checkpoint

Before ordering the HD frame, confirm the opening, support, swing, and infill plan.

Finished opening width + height
Hinge-side support condition
Swing direction + full clearance
Latch / lock requirements
Selected infill material + thickness
Photos from both sides
Project city / state
Pool, wildfire, or other code considerations

Choose your next step

Have the opening reviewed, or return to the exact Heavy-Duty 4×6 product options.

For custom panels, unusual walls or posts, pool-barrier projects, wildfire-focused projects, or future automation, send the site information before fabrication.

Review my opening Go to product options

Call (888) 876-3006

Trusted by investors, architects, homeowners and contractors

Watch Plug ✔

@watchplug

"I couldn't be happier with the fence. From the moment it went up, it completely transformed my backyard. The sleek design without visible posts gives it such a modern, high-end look. It's like having a piece of art around my home. I also love that it's fire-resistant, which gives me peace of mind living in this area. Definitely worth every penny!"

Mike

Home Owner

Daymond John

CEO, Entrepreneur & Investor

DW Design & Build ✔

@dannywangdesign

"We're honored to be recommended by Danny Wang Design, a premier contractor known for exceptional outdoor living spaces. In our latest collaboration, Danny created a stunning backyard and entrusted us with the gate and fence system. We're proud to be his trusted partner for quality and reliability."

Jim Monahan

★★★★★

"AluGlobus was extremely helpful with my order, answering all my questions and delivering everything to Texas in perfect condition. The products were well-packed in a solid wood crate, and excellent quality. I'm so glad I found them online. Highly recommended. I'll be buying from them again. Thanks to everyone who made it happen!"

David

Customer

Service Department

Mercedes Benz Engineer

Valley One Gates & Access

"We use Aluglobus 100% with every fence/gate job we have. As a contractor I can say they are working very hard and their product is the highest quality I can find and the best price. We're very happy working with them! Our experience working with them is always top notch."

22 July 2025

Shopping cart

Shopping cart

Shopping cart

Alu Plexiglass HD PAD GATE plexiglass 4’x6′ door (no plexiglass)

Aluminum 4×6 Heavy-Duty PAD Gate Frame

Key Features

One Frame. Multiple Design Options.

Specifications

Description

Product Description

4×6 HD PAD GATE. Heavy-duty aluminum frame, Plexiglass not included.

A Heavy-Duty gate frame for projects that need infill flexibility.

Heavy-Duty frame

Choose the infill

Contractor-ready planning

Why this 4×6 frame system works for architectural pedestrian entries.

A frame-first gate matters.

Built for pedestrian openings where structure and design both matter.

Side-yard entries

Front walk gates

Multi-family + light commercial

6063-T6 aluminum frame, Heavy-Duty hardware concept, buyer-selected infill.

See how Aluglobus approaches framed aluminum gate systems.

The aluminum frame and the final infill are two different material decisions.

Measure first. Confirm support. Then fabricate the Heavy-Duty leaf.

What to confirm before ordering the 4×6 HD Plexiglass-ready gate.

Before ordering the HD frame, confirm the opening, support, swing, and infill plan.

Have the opening reviewed, or return to the exact Heavy-Duty 4×6 product options.

Check out our INSTAGRAM

Trusted by investors, architects, homeowners and contractors

Shopping cart

Shopping cart

Search

Shopping cart

Alu Plexiglass HD PAD GATE plexiglass 4’x6′ door (no plexiglass)

Aluminum 4×6 Heavy-Duty PAD Gate Frame

Key Features

One Frame. Multiple Design Options.

Specifications

Description

Product Description

4×6 HD PAD GATE. Heavy-duty aluminum frame, Plexiglass not included.

A Heavy-Duty gate frame for projects that need infill flexibility.

Heavy-Duty frame

Choose the infill

Contractor-ready planning

Why this 4×6 frame system works for architectural pedestrian entries.

A frame-first gate matters.

Built for pedestrian openings where structure and design both matter.

Side-yard entries

Front walk gates

Multi-family + light commercial

6063-T6 aluminum frame, Heavy-Duty hardware concept, buyer-selected infill.

See how Aluglobus approaches framed aluminum gate systems.

The aluminum frame and the final infill are two different material decisions.

Measure first. Confirm support. Then fabricate the Heavy-Duty leaf.

What to confirm before ordering the 4×6 HD Plexiglass-ready gate.

Before ordering the HD frame, confirm the opening, support, swing, and infill plan.

Have the opening reviewed, or return to the exact Heavy-Duty 4×6 product options.

FREE DIGITAL MAGAZINE

Wholesale buyers get $150 OFF their order for a limited time.

Request a call

Leave your request