Pedestrian Single Swing Gate

A pedestrian single swing gate is a one-leaf walk gate that opens on hinges, used for side yards, backyards, gardens, pool areas and entries. Aluglobus sells them as Universal DIY aluminum kits in 4x6-ft and 6x6-ft sizes with ALU 20, ALU 40 or tongue-and-groove slats.

Aluglobus pedestrian single swing gate kits cost $765.54 to $1,210.19. The ALU 20 black 4x6-ft kit is the entry price, woodgrain ALU 40 and ALU 50-60 tongue-and-groove 4x6-ft kits cost $843.16 and $939.18, and the ALU 40 black 6x6-ft kit is the top of the range.

Most walk gates are 3 to 4 ft wide and about 6 ft tall. Aluglobus kits come in 4x6 ft and 6x6 ft. A 4-ft gate fits wheelbarrows and most mowers, while a 6-ft gate suits wider side yards. Send your opening size if it falls between kits.

You choose. ALU 50-60 tongue-and-groove gates interlock with no gaps for full privacy. ALU 20 and ALU 40 gates use 3/8-inch or 1/2-inch gaps for a semi-private look that lets air and light through. Match the gate to your fence so the line looks continuous.

Yes. The heavy-duty support hinge is self-closing capable, but a hydraulic spring is recommended for reliable self-closing, especially for pool gates. The spring is sold separately. Check your local pool barrier rules for the closing and latching requirements before installing.

Universal DIY gate kits are made to mount between two walls and assemble with standard tools, no welding. Measure carefully, square the frame, then fasten the hinge and stopper sides. For a gate set in the ground, request the heavy-duty post upgrade for a concrete footing.

Yes. The wide lock-side frame on Aluglobus Universal DIY gates fits most U.S.-size lock hardware. The lock itself is not included, so choose the lock body or latch first and confirm its fit before assembly. Electronic latches can also be planned for access control.