Alu 40 DIY Pedestrian Gate 6x6 ft Ipe (With Background)

Alu 40 DIY Pedestrian Gate 6x6 ft Walnut (With Background)

Alu 40 DIY Pedestrian Gate 6x6 ft Yellow Oak (With Background)

ALU 40 Woodgrain 8×8 ft. Universal DIY Pedestrian Gate Kit – Double Swing – GAP 3/8″ or 1/2″

$2,157.28

Aluglobus Universal DIY Aluminum Gate System

8′ × 8′ DIY aluminum gate kit featuring the ALU40 woodgrain system in a
double swing configuration. This large-format pedestrian gate combines
the warmth of a wood-look finish with a modern aluminum gate design and
offers your choice of 3/8″ or 1/2″ spacing.

Gate Size
8′ W × 8′ H

System
ALU40

Gate Type
Double Swing

Finish
Woodgrain

Installation
Universal DIY Gate Kit

Gate Configuration
Two-Leaf Double Swing Design

Gap Options
3/8″ or 1/2″

Appearance
Modern Wood-Look Aluminum Gate

Entry Type
Pedestrian Double Swing Gate

Profile System
ALU40 Woodgrain Aluminum

Large-format DIY double swing gate:
the 8′ × 8′ ALU40 woodgrain configuration provides a wider two-leaf
opening with the clean appearance of a woodgrain aluminum gate, while
3/8″ or 1/2″ spacing allows the finished look to match the surrounding
fence or architectural design.

OPTIONAL ADDITIONS

Choose Posts & Caps

Select only the additional components required for your gate installation.

OPTIONAL

3x3 in. x 8 ft. HD Square Post (.090 Thk) - Black

$135.00

3x3 in. x 8 ft. HD Square Post (.090 Thk) - Custom Color

$175.50

3x3 in. x 12 ft. HD Square Post (.090 Thk) - Black

$203.00

3x3 in. x 12 ft. HD Square Post (.090 Thk) - Custom Color

$263.90

Add to cart

Buy Now

Categories: Aluminum Gates, Aluminum Gates - Alu40, Aluminum Gates - DIY Aluminum Gate Kit, Gates

Description

Product Description

ALU40 Woodgrain · Universal DIY · 8′ × 8′ · Double Swing

A wide double-swing aluminum gate with the warmth of woodgrain and a field-assembled DIY frame.

The ALU 40 Woodgrain 8×8 Universal DIY Pedestrian Gate Kit pairs a two-leaf swing configuration with 6063-T6 aluminum, horizontal ALU40 slats, woodgrain powder coating, and 3/8″ or 1/2″ gap options for residential and light-use access points.

Choose product options ↑ Explore the system ↓

8×8 overall · double swing · woodgrain ALU40

Overall format8′ × 8′

ConfigurationDouble swing

SystemUniversal DIY

Gap options3/8″ or 1/2″

Material6063-T6 aluminum

Gate system gallery

Frame strength, slat compatibility, powder coating, hinge support, and DIY assembly.

Full-Frame Strength - ALU40 Woodgrain Universal DIY gate — Full-Frame Strength

Universal Slat Compatibility - ALU40 Woodgrain Universal DIY gate — Universal Slat Compatibility

Long-Lasting Powdercoat - ALU40 Woodgrain Universal DIY gate — Long-Lasting Powdercoat

Reinforced Hinge Support - ALU40 Woodgrain Universal DIY gate — Reinforced Hinge Support

Premium Aluminum Construction - ALU40 Woodgrain Universal DIY gate — Premium Aluminum Construction

Easy DIY Installation - ALU40 Woodgrain Universal DIY gate — Easy DIY Installation

Universal DIY gate system

Built to assemble cleanly on site.

The Universal DIY frame system is organized around repeatable aluminum components, field assembly, and a finished architectural gate rather than custom welded fabrication.

Built for DIY - Installed in Minutes

See how our universal gate system goes together quickly and cleanly

One System. Endless Compatibility

Frame adjusts to fit multiple gate sizes, styles, and lock setups right on the spot.

Engineered for Strength & Durability

From 6063-T6 aluminum to AAMA-2604 powder coating, rust-free, weather-ready

Additional project views

Woodgrain finish, gate details, and installed-project context.

ALU40 Woodgrain Universal DIY gate project view

Universal DIY assembly video

Watch the gate-system assembly format.

Watch the Universal DIY aluminum gate assembly format with a woodgrain gate visual that matches the product family.

Product Overview

The ALU 40 Woodgrain 8×8 ft. Universal DIY Pedestrian Gate Kit is a modern double-swing aluminum gate system designed for wide residential access points where clean horizontal lines, woodgrain appearance, and low-maintenance exterior performance are equally important.

Built from precision-extruded 6063-T6 aluminum and finished with a high-definition woodgrain powder coat, the system delivers the visual warmth of wood without the rot, insect damage, or recurring staining and sealing cycle associated with natural timber. The two-leaf 8×8 configuration creates a wider opening than the smaller single-gate formats while keeping the Universal DIY approach to field assembly.

The result is a factory-engineered, DIY-oriented aluminum double-swing gate system that coordinates naturally with modern horizontal fencing and other wood-look aluminum exterior elements.

Benefits: Why Homeowners and DIY Builders Choose It

The ALU 40 Woodgrain 8×8 Universal DIY double-swing gate combines architectural aluminum, a woodgrain finish, and a field-assembled frame format for projects that need a wider opening without moving to a custom welded gate.

Architectural-grade aluminum construction

6063-T6 aluminum supports straight alignment, corrosion resistance, and long-term exterior use.

Realistic woodgrain finish

The finish brings a warmer natural-wood appearance to a gate that does not require staining or sealing.

3/8″ or 1/2″ horizontal gaps

Select the gap that best balances visual screening, light, and airflow for the project.

Double-swing configuration

Two gate leaves divide the overall opening and create a coordinated center-closing layout.

Low-maintenance performance

Routine care centers on cleaning and hardware inspection rather than recurring refinishing.

DIY-oriented assembly

The Universal DIY frame system is designed for field assembly with coordinated profiles and hardware rather than custom welding.

Applications: Where and How It’s Used

This Universal DIY 8×8 aluminum double-swing gate kit is designed for wide residential and light-use access points where the gate needs to coordinate with a modern fence line.

Wide side-yard and backyard entries: Creates a larger two-leaf opening while maintaining a clean horizontal-gate design.
Courtyard and garden access: Pairs a warm woodgrain look with a corrosion-resistant aluminum structure.
Property and landscape projects: Coordinates with contemporary stucco, stone, concrete, wood-look cladding, and horizontal aluminum fencing.
Matching fence-and-gate layouts: Carries the ALU40 woodgrain design across the access point for a more consistent property-wide finish.

Before ordering, confirm the full opening, support conditions, swing clearance for both leaves, selected gap, and the hardware plan required for the project.

Design & Durability: Materials, Finishes, Customization

The ALU40 Woodgrain Universal DIY Gate Kit uses 6063-T6 architectural aluminum, selected for corrosion resistance, dimensional stability, and its suitability for precise extruded gate components.

The aluminum is finished with a high-definition woodgrain powder coating that provides wood-style color and texture while remaining appropriate for outdoor use. The system presentation also identifies an AAMA 2604 architectural powder-coating direction for long-term exterior durability.

Project choices can include woodgrain or compatible solid powder-coat finishes, hinge and swing planning, latch or lock coordination, and the selected 3/8″ or 1/2″ horizontal gap. Confirm the final configuration before ordering so the gate, supports, and adjoining fence system work together correctly.

System specifications

The details that define the 8×8 Woodgrain Universal DIY double-swing configuration.

The product is a two-leaf aluminum pedestrian gate system using ALU40 horizontal slats, a woodgrain exterior finish, and a Universal DIY frame format.

Specification boundary: do not assume leaf weight, hinge quantity, post dimensions, footing depth, wind-load rating, or automation compatibility unless those items are confirmed for the specific order and project condition.

Product: ALU 40 Woodgrain 8×8 ft. Universal DIY Pedestrian Gate Kit
Configuration: Double swing
Overall size: 8 ft × 8 ft
Infill: Horizontal ALU40 aluminum slats
Gap options: 3/8″ or 1/2″
Material: 6063-T6 architectural aluminum
Finish: High-definition woodgrain powder coating
Coating direction: AAMA 2604 architectural powder-coating system
Exterior behavior: Corrosion-resistant aluminum with low routine finish maintenance
Combustibility: Non-combustible aluminum material
Primary use: Wide residential pedestrian access and coordinated fence-and-gate projects

Installation & Buying Guide: Sizes, Compatibility, Ordering Process

The 8×8 Universal DIY double-swing gate is designed for field assembly, but the larger overall opening makes accurate layout more important than on the smaller gate formats.

Measure and confirm the finished 8′ × 8′ gate opening and the support conditions on both sides.
Confirm the center-closing layout, swing clearance, grade, and hinge direction for both leaves.
Assemble the Universal DIY frames and install the ALU40 horizontal slats using the selected 3/8″ or 1/2″ spacing configuration.
Install and align the hinge hardware so both leaves swing freely and meet correctly at the center.
Coordinate the center latch or lock condition, final stops, and any project-specific support hardware.
Check plumb, level, top-line alignment, center gap, leaf clearance, and fasteners before putting the gate into service.

For ordering, confirm the woodgrain finish, selected gap, double-swing configuration, opening dimensions, support conditions, and delivery or pickup requirements before the kit is finalized.

Instructions

Six installation checkpoints from preparation through final cleanup.

Use these six installation checkpoints to organize the two-leaf 8×8 assembly from preparation through final alignment.

Preparation

Organize all materials in a clean workspace to avoid damage or misplacement.

Frame Assembly

Connect the universal gate frame with stainless steel screws, ensuring all corners are square and secure.

Slat Installation

Cut and insert the ALU-40 slats into the frame grooves. Adjust the spacing to achieve your desired privacy level. Secure each slat with the provided stainless steel screws

Hinge Installation

Attach the heavy-duty hinges to the side posts and frame, ensuring proper alignment for smooth operation.

Post and Gap Cover Installation

Attach the side posts for a polished look.

Final Touches

Press flat caps onto the posts, inspect for tight connections, and clean the surfaces for a professional finish.

8×8 double-swing assembly visual

Aluglobus video

Additional factory-direct aluminum system and fabrication context.

Explore more Aluglobus aluminum-system and fabrication footage.

Frequently asked questions

Plan the 8×8 double-swing layout, gap, supports, finish, and access hardware before ordering.

These answers cover DIY assembly, woodgrain appearance, weather resistance, privacy, applications, materials, gap selection, project planning, non-combustible aluminum, and matching fence layouts.

Can I install the ALU 40 Woodgrain 8×8 Universal DIY double-swing gate myself?

The Universal DIY system is designed for field assembly without custom welding. An 8×8 double-swing gate is a larger assembly than the smaller pedestrian-gate sizes, so accurate support layout, leveling, hinge alignment, and safe handling are especially important. A second person or professional installer is recommended for positioning the gate leaves.

Does the gate look like real wood?

The high-definition woodgrain finish is designed to reproduce the warmth and visual texture of natural wood while keeping the corrosion-resistant aluminum substrate underneath.

Is the gate resistant to weather and rust?

Yes. The gate uses 6063-T6 architectural aluminum with an exterior powder-coated woodgrain finish. Aluminum does not develop iron-oxide rust, and the finish is designed for outdoor exposure and low routine maintenance.

Does the gate provide full privacy?

This product is offered with 3/8-inch or 1/2-inch horizontal gap options. Both create substantial visual screening while still allowing some airflow and light, so the gate is not a completely solid privacy surface.

Where can this 8×8 double-swing gate be used?

It is suited to wide residential access points, side-yard and backyard entries, garden and courtyard layouts, coordinated fence-and-gate systems, and other projects that need an 8×8 double-swing architectural aluminum gate.

What material is used for the gate?

The system is built from 6063-T6 architectural aluminum with ALU40 horizontal slats and a woodgrain powder-coated finish.

What gap options are available?

The current 8×8 Woodgrain Universal DIY configuration is offered with 3/8-inch or 1/2-inch horizontal gap options. Confirm the selected gap before ordering because it affects the finished visual screening and slat layout.

What should I confirm before ordering an 8×8 double-swing gate?

Confirm the finished opening, support and post conditions, swing clearance for both leaves, hinge orientation, latch or lock plan, grade, selected gap, and the exact kit configuration required for the project.

Is the aluminum non-combustible?

The aluminum material is non-combustible. Complete wildfire, Zone Zero, pool-barrier, or other code compliance depends on the full assembly, placement, hardware, openings, and local requirements.

Can the gate coordinate with matching aluminum fencing?

Yes. The ALU40 woodgrain design can be coordinated with compatible aluminum fence sections and finishes for a more consistent property-wide appearance.

Factory-direct ALU40 Woodgrain gates

Coordinate the full 8×8 double-swing gate before the material reaches the job site.

Choose the product options above or send Aluglobus the project layout for help coordinating the two gate leaves, supports, adjoining fence sections, woodgrain finish, gap selection, and access hardware.

Choose product options ↑ Request project support

Aluglobus Aluminum Systems · ALU40 Woodgrain Universal DIY double-swing gates · Factory-direct supply · Nationwide shipping

Trusted by investors, architects, homeowners and contractors

Watch Plug ✔

@watchplug

"I couldn't be happier with the fence. From the moment it went up, it completely transformed my backyard. The sleek design without visible posts gives it such a modern, high-end look. It's like having a piece of art around my home. I also love that it's fire-resistant, which gives me peace of mind living in this area. Definitely worth every penny!"

Mike

Home Owner

Daymond John

CEO, Entrepreneur & Investor

DW Design & Build ✔

@dannywangdesign

"We're honored to be recommended by Danny Wang Design, a premier contractor known for exceptional outdoor living spaces. In our latest collaboration, Danny created a stunning backyard and entrusted us with the gate and fence system. We're proud to be his trusted partner for quality and reliability."

Jim Monahan

★★★★★

"AluGlobus was extremely helpful with my order, answering all my questions and delivering everything to Texas in perfect condition. The products were well-packed in a solid wood crate, and excellent quality. I'm so glad I found them online. Highly recommended. I'll be buying from them again. Thanks to everyone who made it happen!"

David

Customer

Service Department

Mercedes Benz Engineer

Valley One Gates & Access

"We use Aluglobus 100% with every fence/gate job we have. As a contractor I can say they are working very hard and their product is the highest quality I can find and the best price. We're very happy working with them! Our experience working with them is always top notch."

22 July 2025

Shopping cart

ALU 40 Woodgrain 8×8 ft. Universal DIY Pedestrian Gate Kit – Double Swing – GAP 3/8″ or 1/2″

ALU 40 Woodgrain 8×8 ft. Universal DIY Pedestrian Gate Kit – Double Swing – GAP 3/8″ or 1/2″