Architectural aluminum. Custom sizes. Built for Colorado properties. Colorado fence systems for Front Range homes, mountain properties, contractors, builders, and HOAs. Choose open or full-privacy designs planned around wind exposure, elevation, sloped terrain, local footing requirements, and the architecture of the property.
Not a box-store product. Not a thin-wall profile. Not a one-size-fits-all system. Nine aluminum fence profiles for Colorado homes, businesses, contractors, builders, and HOAs, custom-planned around the property dimensions, privacy goals, terrain, wind exposure, and local requirements.
Colorado is not one uniform fence market. A level Denver lot, an exposed Castle Rock property, and a sloped mountain site can require different post spacing, footing design, privacy strategy, and finish planning. Aluglobus supplies custom aluminum systems built around those project-specific conditions.
Send the Colorado project address, measurements, photos, grade changes, preferred privacy level, design, and color. Our team will help select the profile and identify the site details needed for post spacing, footings, wind exposure, gates, local codes, and installation planning.
ALU 20 is a strong match for Colorado front yards where owners want a defined boundary without closing off mountain, landscape, or neighborhood views. Its slim aluminum pickets can be spaced around the design goal, while the open format presents less solid surface to Front Range winds than a full-privacy panel. Heights, gaps, posts, and transitions are configured for the actual property.
ALU 40 uses a wider 4-inch face for a stronger architectural line on Colorado estates, modern homes, side yards, and visible perimeter runs. It works especially well in Castle Rock, Parker, Highlands Ranch, Denver, and similar markets where the fence must complement larger façades and coordinated gates. Spacing can be adjusted for openness, partial privacy, and site exposure.
ALU 50 and ALU 60 tongue-and-groove profiles create a clean, zero-sightline privacy fence for Colorado backyards, equipment areas, commercial boundaries, and properties close to neighboring homes. Because a solid fence receives more wind pressure than an open profile, post spacing, post size, footing design, fence height, and exposure must be reviewed for the project address.
Clear or frosted plexiglass panels within an aluminum frame can preserve a Colorado mountain, golf-course, lake, or landscape view while still defining the boundary. Clear panels keep sightlines open, while frosted panels add separation. For pool areas, the final height, openings, gates, latches, and installation must follow the governing local pool-barrier requirements.
For contemporary homes in Denver, Boulder, Aspen, Vail, and Colorado's newer master-planned communities, a frameless cladding fence creates a flat architectural surface instead of a traditional picket appearance. It can coordinate with gates and wall cladding, while custom panels accommodate corners, grade changes, and the proportions of the property. Solid sections require site-specific wind and foundation planning.
AeroLouver is designed for Colorado owners who want privacy without using one completely solid surface. Fixed-angle aluminum blades interrupt outside sightlines while allowing air to pass through the fence, making it a useful option for exposed Front Range properties, outdoor living areas, and taller privacy applications. Final height, post spacing, and footings still depend on the site.
For Colorado neighborhoods and HOAs that prefer a clean white or traditional fence appearance, the ALU Vinyl-Look system combines that familiar visual direction with an aluminum structural framework. It avoids the rot and repainting associated with wood while allowing custom sizing for local lots, slopes, gates, and exposure to strong sun and seasonal temperature changes.
A wall topper can add privacy and architectural detail to an existing Colorado masonry, concrete, brick, or block wall without replacing the full boundary. Before fabrication, the wall condition, cap, anchoring area, added wind surface, proposed height, and local zoning or HOA restrictions must be reviewed. The topper can then be coordinated with the property's fence, gate, and finish palette.
Colorado contractors and experienced DIY customers can order a pre-cut aluminum fence package with rails, pickets, posts, caps, hardware, and fasteners prepared for the measured run. Assembly does not require welding, but layout, excavation, footing depth, utility locating, slope handling, and code compliance remain the installer's responsibility at the project site.
Colorado projects can combine high-altitude sun, Front Range wind, freeze-thaw cycles, snow, sloped grades, and different municipal rules. Our system is configured around the property rather than pulled from a standard-size catalog.
We plan the fence around the measured run, grade changes, gate locations, desired privacy, exposure, and locally required footing conditions. Custom panels reduce filler pieces and awkward field modifications.
Colorado homeowners and trade professionals work directly with the Aluglobus team for profile selection, custom sizing, fabrication, finishing, packaging, and project coordination.
Extruded aluminum does not rot, split, or absorb moisture like wood. System selection and structural planning account for Colorado wind exposure, elevation, snow accumulation near the fence, temperature swings, and daily use.
Choose the profile around privacy, views, airflow, neighborhood character, HOA direction, slope, height, and wind exposure. Colorado projects are not forced into one standard fence style.
Fence panels, pedestrian gates, driveway gates, posts, and finishes can be planned as one exterior system. This creates a consistent line from the Colorado property's entry to its side and rear boundaries.
High-elevation UV, sun, snow, moisture, and temperature swings make surface preparation important. Our seven-stage pretreatment and AAMA 2604 powder-coating process supports durable exterior performance in custom colors, textures, and wood-look finishes.
Limited Promotional Inventory
CONTRACTORS ONLY
Send us your information and our team will help you check available woodgrain colors, profiles and current promotional inventory.
Valid on qualifying projects only. Minimum project value required. Restrictions may apply.
Factory-direct pricing. Contractor-ready systems. Limited-time promo.
No stacking with other discounts.
Log in