Aluminum driveway gates

Aluminum Driveway Gates: Sliding & Swing, 12–24 ft

Sliding and dual swing aluminum driveway gates on the Aluglobus Architectural 45 heavy-duty frame. Sliding kits come in 12 and 18 ft, custom sliding gates go up to 24 ft, and double swing gates are built to your opening, in black, bronze, white or a wood grain finish. Factory direct and shipped nationwide.

Black ALU40 horizontal slat aluminum double swing driveway gate closed over a paver driveway
A black ALU40 double swing driveway gate on the Architectural 45 frame.
12 & 18 ft kitsCustom sliding up to 24 ft
Architectural 4545° mitered 2 x 4 in HD frame
Wood grain finishesIPE, Walnut, Yellow Oak
Operator-readyBuilt to take a gate opener

Sliding or swing

Sliding vs dual swing driveway gates

Both styles use the same heavy-duty aluminum frame and the same slats, so the choice comes down to the space around your opening, the slope of the driveway and how you want the gate to open.

Black aluminum sliding driveway gate with a matching walk-through gate across a driveway in Arleta, CA
Sliding gate. Rolls sideways on 2.5 in C wheels in a C track, guided at the top by a roller guide. Arleta, CA.
Black ALU20 aluminum double swing gate closing a driveway beside a parked car
Dual swing gate. Two leaves on double-support hinges meet in the middle and open in or out.
Sliding driveway gateDual swing driveway gate
Space it needsA straight run beside the opening, about as long as the gate, for the gate to slide intoA clear arc in front of or behind the opening for each leaf to swing through
Driveway slopeBest on a level path across the opening, where the track runsNeeds the leaves to clear the ground as they swing; a rising driveway may mean opening outward
Widths12 and 18 ft kits, 19 ft DIY kit, custom up to 24 ftBuilt to your opening on the HD frame
HardwareC wheels, C track, roller guide, gate stopper and gate catcherDouble-support hinges (2 or 3 per leaf by size), latch and drop bolt
Best forShort driveways, cars parked close to the gate, wide openingsDeep driveways with room to swing, a classic centered entrance

Not sure which fits? Send a photo of the opening with the width and slope and we will suggest the style. See every gate style on our aluminum gates page.

Widths, heights and kits

Driveway gate sizes and kit prices

Listed sliding gate kits are 6 ft high in 12 ft and 18 ft widths. The DIY sliding kit is 19 x 6 ft. Anything else, including 14, 16, 20 and 24 ft openings, other heights and double swing gates, is built to order on the same frame.

Sliding gate kit (6 ft high)12 ft wide18 ft wide
ALU20 black, Contractor Line$3,895.44$5,003.92
ALU40 black, HD-USA$3,897.82$4,954.87
ALU40 wood grain, 3/8 in gap$4,196.70$5,420.90
ALU50 T&G wood grain, HD-USA$4,559.35$5,912.55
ALU60 T&G black, no gap$4,408.87$5,699.37

DIY

19 x 6 ft DIY sliding gate

The Aluglobus Universal Modular sliding kit for a 19 ft opening, from $2,093.15. Assembles with standard tools, no welding.

Custom

Up to 24 ft sliding

Custom sliding gates up to 24 ft, any height and any powder-coat color, with horizontal, vertical, diagonal or custom slats.

Swing

Dual swing, built to order

Double swing driveway gates on the HD frame, sized to your opening. A 16 ft opening, for example, is quoted as two matching leaves or one sliding gate.

Shop prices, November 2026. Posts, freight, tax, gate operators and installation are extra. See all kits in sliding gate systems and aluminum gate kits.

The wood look

Wood-look aluminum instead of wooden driveway gates

A wooden driveway gate needs staining and sealing and can warp, rot or draw termites. Aluglobus wood grain gates get the look from a powder-coated wood grain finish on aluminum, so there is nothing to seal and nothing to rot.

  • Wood grain finishes such as IPE, Walnut and Yellow Oak
  • ALU40 4 in slats with a 3/8 in gap, or ALU50/60 tongue and groove for a solid, no-gap face
  • Black frame with a wood grain face, or a fully custom color
  • 6063-T6 aluminum with AAMA 2604 architectural powder coat (AkzoNobel powders)

On-screen colors are approximate. Ask for a physical finish sample before ordering.

Wood grain aluminum double swing gate in a black frame beside a white house wall
Wood grain double swing gate in a black heavy-duty frame.
ALU60 wood grain tongue-and-groove aluminum double gate in a black frame
ALU60 tongue and groove in wood grain: a solid face with no gaps.
Black aluminum double gate with a coyote roller mounted across the top rail and a hillside behind
Black aluminum double gate with a coyote roller along the top.

Automation and add-ons

Automation-ready frames and coyote rollers

Heavy-duty sliding and swing frames are built to take a gate operator when you want the gate to open from a remote, keypad or phone.

  • Sliding: C wheels on a C track, roller guide, gate stopper and gate catcher keep a motorized gate running straight and stopping in the same place.
  • Swing: double-support hinges, 2 or 3 per leaf by size, carry the leaf for a swing operator.
  • Choosing an operator: size it to the gate's width, weight and how often it opens. Aluminum is much lighter than steel or iron, which is easier on wheels, hinges and the motor.
  • Coyote rollers: add a rolling bar along the top so coyotes and climbing dogs cannot get a grip. See coyote rollers for fences and gates.

Gate operators, keypads and wiring are fitted by your installer or gate contractor.

Heavy-duty frame

The Aluglobus Architectural 45 frame

Every Aluglobus driveway gate is a complete frame system with top and bottom members, never a fence panel on hinges.

Frame2 x 4 in, 45° mitered corners, .090 or .125 in wall
CornersBig and small L-brackets lock the frame square
InfillALU20, ALU40 or ALU50/60 T&G slats in C-channels; horizontal, vertical, diagonal or custom on HD
Sliding hardwareInner connectors, 2.5 in C wheels, C track, roller guide, gate stopper and gate catcher
Swing hardwareDouble-support hinges, 2 or 3 per leaf by size
FastenersStainless slat and frame screws
Material6063-T6 extruded aluminum, AAMA 2604 powder coat
MadeEngineered and manufactured by Aluglobus, shipped nationwide
Exploded parts drawing of the Aluglobus heavy-duty aluminum sliding gate
Official exploded drawing of the heavy-duty sliding gate.

Real projects

Aluminum driveway gate projects

Real photos from Aluglobus gate projects. Open a project for the full photo set and specs.

More aluminum double gates

Dark bronze ALU60 aluminum double gate with keypad lock between a brick pillar and a house wall
ALU60 dark bronze double gate with a keypad lock.
Dark wood grain ALU60 tongue-and-groove aluminum double gate between green hedges
ALU60 T&G double gate in a dark wood grain.
Black full-privacy ALU60 aluminum double gate set between white stucco walls
ALU60 full-privacy black double gate.

Driveway gates near you: custom driveway gates in Menlo Park and smart driveway gates in Westlake Village.

Questions

Aluminum driveway gate FAQ

How wide can an aluminum driveway gate be?

Aluglobus sliding gate kits come in 12 ft and 18 ft widths, 6 ft high, and the DIY sliding kit covers a 19 ft opening. Custom sliding gates are built up to 24 ft, and dual swing gates are built to the width of your opening, so in-between sizes such as 14 or 16 ft are quoted as custom gates.

Should I choose a sliding or a dual swing driveway gate?

Choose a sliding gate when the driveway is short, cars park close to the gate or the driveway rises behind the opening, as long as there is a straight run beside the opening for the gate to slide into. Choose a dual swing gate when there is room for both leaves to swing open and you want a centered, classic entrance.

Do you make wood-look driveway gates?

Yes. Aluglobus gates come in powder-coated wood grain finishes such as IPE, Walnut and Yellow Oak on ALU40 slats or ALU50/60 tongue and groove. They look like a wooden driveway gate but never need staining or sealing and will not rot or warp.

Can an aluminum driveway gate be automated?

Yes. Heavy-duty sliding and swing frames are built to take a gate operator. Sliding gates run on C wheels in a C track with a roller guide, stopper and catcher, and swing leaves hang on double-support hinges. Choose the operator for the gate's width, weight and daily use; your installer or gate contractor fits and wires it.

How much does an aluminum driveway gate cost?

Listed 6 ft high sliding gate kits run from $3,895.44 for a 12 ft ALU20 kit to $5,912.55 for an 18 ft ALU50 tongue-and-groove wood grain kit, and the 19 ft DIY sliding kit is $2,093.15 (shop prices, November 2026). Custom widths, double swing gates, posts, freight, operators and installation are quoted separately.

Plan your driveway gate

Send the opening width, height, slope and a photo, plus sliding or swing and your finish. We reply with the right gate, a full parts list and a factory-direct price.

Get Wholesale Pricing

Contractor or dealer pricing, or our full e-catalog. Tell us what you need and our wholesale team will get back to you.

10% off Premium Aluminum Woodgrain Collection

Limited Promotional Inventory

CONTRACTORS ONLY

Claim Your 10% Off

Send us your information and our team will help you check available woodgrain colors, profiles and current promotional inventory.

Valid on qualifying projects only. Minimum project value required. Restrictions may apply.

Aluglobus Aluminum Systems (White)

Get a free quote for your project.

Factory-direct aluminum fences, gates, patio covers and cladding. Send your sizes or a short description and our team will get back to you with pricing.

No obligation. Real people, real factory pricing.