1 / 3
Material6063-T6 aluminum
FinishBlack powder coat, AAMA 2604
Gate size18′ W × 6′ H, sliding

Aluminum systems

Aluminu Gate Kit Alu40 18X6 S.G HD USA SLIDING

Heavy-duty 18' x 6' ALU40 aluminum sliding gate kit with a 4" HD 6063-T6 frame and a C-track system for smooth travel. Made for wide openings and high-traffic areas where a swing gate would take up too much space.

  • 6063-T6 aluminum
  • Black powder coat, AAMA 2604
  • 18′ W × 6′ H, sliding
$4,954.87
ALU 40 Horizontal GAP 38 Black 18X6 ft. Heav Duty Sliding Gate BL (Motorized)

$4,954.87

Add to cart
Buy Now
  • Factory direct from Aluglobus Aluminum Systems
  • Nationwide shipping across the U.S.
  • Project support for homeowners and trade pros
Material6063-T6 aluminum
FinishBlack powder coat, AAMA 2604
Gate size18′ W × 6′ H, sliding
4.9 ★100+ Google reviews
1,000+Active contractors nationwide
USA-made6063-T6 aluminum
No weldingBolt-together frame

Get the Highlights

Black aluminum sliding driveway gate

Slides along the fence line. Never swings into the driveway.

Aluminum sliding gate on a driveway

Paired C-wheels and a C-track for smooth, quiet travel.

Corner of an Aluglobus HD gate frame

A 4″ heavy-duty aluminum frame carries the moving gate.

Keypad lever lock on an aluminum gate

Ready for the access hardware you choose.

Powder-coated ALU40 frame

Wide 4″ ALU40 slats with a 3/8″ gap.

ALU40 gate in a stucco side yard

6063-T6 aluminum with an AAMA 2604 powder coat.

Aluminum sliding gate on a driveway

Slides, never swings

The gate travels alongside the fence line instead of swinging through the driveway, so cars can park close to the opening. Plan side runback for the full width of the gate.

Aluglobus heavy-duty sliding gate parts drawing

Every part, one system

Frame, wheels, track, guide roller, catcher and stopper are matched in one kit, so you're not sourcing sliding hardware separately.

Corner of an Aluglobus heavy-duty gate frame

A heavy-duty frame carries the load

A 4″ heavy-duty aluminum perimeter frame carries the moving gate and resists sagging. The slats are the finish; the frame is the structure.

Black ALU40 double gate on pavers

Bold 4″ ALU40 slats

Wide 4″ ALU40 slats give the gate a substantial, architectural face with even 3/8″ gaps. Pair it with ALU40 fence panels for one continuous look.

Never rustsNo weldingMade in the USAAAMA 2604 finishShips nationwideNon-combustibleFactory directNever rustsNo weldingMade in the USAAAMA 2604 finishShips nationwideNon-combustibleFactory direct

What's included

A complete 18′ × 6′ sliding gate system.

Frame, infill and sliding hardware matched in one kit. Posts: choose 3″, 4″ or 6″ aluminum based on gate weight, site conditions and structural requirements.

ALU40 HD sliding gate drawing, 18′ × 6′
ALU40 HD sliding gate drawing, 18′ × 6′Assembly drawing with views, dimensions and the part list. Tap to enlarge.
20′ gate frame4″ HD USA aluminum
Inner corner brackets and connectorFrame reinforcement
Channel kitFor the sliding mechanism
6″ guide rollerUpper gate alignment
Gate catcherClosed-position catcher
C-track2⅛″
Gate stopperEnd of travel
ALU40 infill(NEW) ALU40 6′ slats
3″ aluminum capPost cap
Screws#12 × 2″ black and #10 × ¾″

Not included: motor and footings. Posts are sold separately.

ALU40 slat profile drawing ↗

aluminum sliding gate kit

A heavy-duty aluminum sliding driveway gate kit

This aluminum sliding gate kit is built for driveways and wide openings. The gate travels along the fence line instead of swinging into the driveway, on a 4″ heavy-duty USA aluminum frame with matched track, wheels, guide roller, catcher and stopper. It can be automated with a compatible gate opener and ships factory direct from Southern California.

How it is built

Universal DIY or Heavy-Duty. See every part.

Official Aluglobus exploded drawings. Every gate is a complete frame system with top and bottom members, never a fence panel on hinges.

Universal DIY

DIY Universal pedestrian gate

Pre-cut universal frames, slat track and T-stopper. Assembles on site with standard tools, no welding.

Exploded drawing of the Aluglobus DIY Universal pedestrian gate
  • Single swing pedestrian gates, kits in 4 × 6 and 6 × 6 ft
  • Horizontal slats, ALU20, ALU40 or ALU50/60 T&G
  • Wide 5 in lock-side frame for standard U.S. locks
  • DIY sliding kit 19 × 6 ft
Heavy-Duty

Heavy-Duty pedestrian gate

A 2 × 4 in HD frame locked square with big and small L-brackets and C-channels. Built to your opening.

Exploded drawing of the Aluglobus Heavy-Duty pedestrian gate
  • Single swing, double swing and sliding
  • Horizontal, vertical, diagonal or custom slats
  • Double-support hinges
  • Any size, any powder-coat color
Exploded drawing of the Aluglobus Heavy-Duty sliding gate
Heavy-Duty sliding

Heavy-Duty sliding gate

HD frames with inner connectors, C-channels, 2.5 in C wheels on a C track, roller guide, gate stopper and gate catcher. Sliding kits in 12 × 6 and 18 × 6 ft, or built to your driveway.

  • Horizontal and vertical HD frames, small and big L-brackets
  • Stainless slat and frame screws
  • Ready for a gate operator when you want automation

The fence systems your gate matches

Fence system

ALU INTEGRAL™

Two-Way Integrated Post System

Slats slide straight into the posts and stack on aluminum spacers. No exposed rails, quick to install.

Exploded drawing of the Aluglobus ALU INTEGRAL two-way integrated post system
  • 2.75 × 2.75 in posts with caps
  • Same slat profiles and finishes as the gates
  • Aluminum spacers set the slat gap
Fence system

ALU FRAME™

C-Channel Mounting System

Square aluminum posts with a channel and cover on each side. Clean lines with every screw hidden.

Exploded drawing of the Aluglobus ALU FRAME C-channel mounting system
  • Channel and cover on each post side
  • Stainless steel screws throughout

Highlights

One gate system. Three slat profiles.

ALU40 black gate with matching ALU40 fence panels
ALU40: wide 4 in slats for a bold face with fewer lines.
ALU20 black slat gate across a side yard walkway
ALU20: slim 2 in slats, a fine linear look.
ALU60 T&G full privacy gate
ALU50/60 T&G: interlocking, no gap, full privacy.
Heavy-duty aluminum sliding driveway gate
Heavy-Duty frames for double swing and sliding driveway gates.
Aluminum gate frame corner with Aluglobus badge
Complete frames, top and bottom members included.
ALU40 wood grain gate in a matching wood grain fence
Black, bronze, white, wood grain or custom color.
Powder-coated aluminum frame and wood grain slats with deadbolt and lever
6063-T6 aluminum with AAMA 2604 powder coat.
Vertical wood grain aluminum gate at a garden entry
Horizontal, vertical or custom slat direction on HD frames.

Aluglobus vs other aluminum gates

Aluminum is the raw material. The system is what you buy.

Two gates can both say aluminum and perform nothing alike. Here is what changes from one system to the next.

Aluglobus gate frame corner with badge✓ Aluglobus
Aluglobus: a complete gate frame with top and bottom members.
Not an Aluglobus product. Field photo: imported aluminum double slat gate✕ Typical aluminum gate kitNot an Aluglobus product
Imported slat gate: check the frame, wall thickness and connections.

Point by point

Tap any row for the details and the question to ask.

Aluglobus, published specTypical aluminum gate kitNot disclosed: ask the seller

Comparison with typical market kits in general, not with any named brand. Ask any supplier for their alloy, pretreatment stages, powder brand and written warranty.

Compare in pictures

Infographic: full Aluglobus gate frame compared with an imported slat gate
Infographic: Aluglobus U.S. warranty support compared with an imported gate

Field photos show other products for illustration, not any named brand.

7-stage vs standard powder coating

Same color. Very different finish.

Standard powder coating cleans the aluminum and puts it in an oven. Architectural 7-stage coating runs it through a full pretreatment line first.

Aluglobus black aluminum fence with 7-stage powder coat on a garden wall✓ Aluglobus
Aluglobus: pretreated in 7 stages and powder coated before assembly.
Not an Aluglobus product. Field photo: standard powder coat peeling off an aluminum fence✕ Standard single-stageNot an Aluglobus product
Standard coating: powder peeling off the aluminum.

Point by point

Tap any row for the details and the question to ask.

Aluglobus, published specStandard single-stageNot disclosed: ask the seller

See each of the 7 stages →

Compare in pictures

Infographic: Aluglobus 7-stage finish compared with an imported gate finish
Infographic: Aluglobus architectural powder coat finish compared with a composite gate

Field photos show other products for illustration, not any named brand.

Inside the factory

See where your gate is actually made.

Inside the Aluglobus aluminum extrusion line, where the profiles for your gate are made. From there every piece goes through the 7-stage pretreatment line, the powder booths and the 110 ft cure oven. Factory direct, no middlemen.

6063-T6 USExtruded architectural aluminum
7 stagesArchitectural pretreatment before powder
110 ftCure oven, long enough for gate and patio beams
NationwideFactory direct shipping to your site
Manufacturing warranty

No Factory Proof.
No Manufacturing Transparency.
No Warranty You Can Verify.

Know who manufactures your aluminum and who stands behind it.

U.S. company
U.S. warranty support
Powder coating warranty

No Coating Brand.
No Preparation Proof.
No Finish Warranty You Can Verify.

Know the coating manufacturer, the preparation process, and who's responsible for the finish.

TIGER CoatingsAkzoNobel

Made in our shop, not resold

Cutting, punching, milling, bending and finishing under one roof.

Aluglobus fabricates its own aluminum systems and ships them factory direct to homeowners and contractors across the U.S. That keeps engineering, quality control and pricing in one place.

Inside the Aluglobus fabrication shop
  • Project-specific fabrication, not fixed kit sizes
  • Punching, laser cutting, milling and bending in the shop
  • 7-stage powder coating with a 110 ft oven for long profiles
  • Packed and shipped to your job site or warehouse
Inside the Aluglobus fabrication shop
Inside the Aluglobus fabrication shop
Inside the Aluglobus fabrication shop
Inside the Aluglobus fabrication shop
Inside the Aluglobus fabrication shop
Inside the Aluglobus fabrication shop
Inside the Aluglobus fabrication shop
Inside the Aluglobus fabrication shop

Inside our U.S. machine shop

Engineered first. Manufactured in-house. Built with precision.

At Aluglobus, we don't just supply aluminum systems. We engineer and manufacture the components that make them work.

Inside our U.S. machine shop we make custom aluminum parts with CNC aluminum machining, precision laser cutting and aluminum sheet metal fabrication: engineered brackets and connection plates, specialized mounting hardware and custom components for our gates, fences and architectural aluminum systems. Making them ourselves gives us more control over quality, fit and customization.

U.S.-manufactured componentsEngineered aluminum gate components, custom aluminum brackets and aluminum fence hardware, made in our own machine shop.
Precision machining of an aluminum bracket and connection plate in the Aluglobus U.S. machine shop
Precision machiningCustom aluminum components machined for accurate system connections.
Precision laser cutting of aluminum sheet into mounting plates and brackets in the Aluglobus machine shop
Laser-cut aluminum partsPrecision-cut brackets, mounting plates and fabricated components.
Laser cutter control station and live cutting camera in the Aluglobus U.S. machine shop
Engineering and designTechnical design comes before precision manufacturing.
Laser-cut aluminum connection plates for engineered aluminum gate components and aluminum fence hardware
Custom componentsPurpose-built aluminum brackets, connectors and mounting plates.
U.S.-based manufacturing facility

Our American machine shop manufactures aluminum components and custom parts for Aluglobus systems.

Engineered before manufacturing

Components start with technical design and engineering before they move into precision production.

Precision CNC machining

Custom aluminum parts are CNC-machined for consistent dimensions, accurate connections and dependable fit.

In-house laser cutting

Precision-cut aluminum sheets, mounting plates, brackets and specialized components.

Custom aluminum fabrication

Specialized brackets, connectors, mounting solutions and custom-designed parts made to your project requirements.

Quality control through direct manufacturing

More oversight of production for consistent components, accurate tolerances and reliable system compatibility.

Built for contractors and custom projects

Our fabrication supports aluminum gates, fencing, patio systems, architectural applications and specialized installations.

A manufacturer behind the system

We show the process. So you know who stands behind the product.

Not just a supplier. From engineering drawings to finished aluminum components, we make the parts that make the system work.

Build your gate

Real gates. Real driveways.

Sliding and driveway gates installed by Aluglobus customers. Swipe to see more.

Sliding driveway gate
Sliding driveway gate
Sliding gate by the palms
Sliding gate by the palms
Driveway gate
Driveway gate
Driveway gate on pavers
Driveway gate on pavers
Bronze driveway gate
Bronze driveway gate
ALU40 gate and fence run
ALU40 gate and fence run
ALU40 double gate
ALU40 double gate
ALU40 gate with matching fence
ALU40 gate with matching fence

Why a sliding gate

Slides, never swings.

Space-saving sliding designThe gate travels alongside the fence line instead of swinging through the driveway, provided adequate side runback is available.
Heavy-duty framingA 4″ HD aluminum perimeter frame carries the moving leaf and keeps the infill inside a real structural perimeter.
Weather-resistant aluminum6063-T6 aluminum will not rust like steel, and the AAMA 2604 powder coat is made for long-term outdoor exposure.
Ready for automationChoose a compatible operator, power, controls and safety devices when you want to automate it.
Sliding driveway gate

Reviews

Real installs. Real reviews.

Homeowners and contractors on their Aluglobus gates.

All reviews
Daymond JohnDAYMOND JOHNCEO, Entrepreneur and Investor
MikeMIKEHomeowner
DavidDAVIDCustomer
4.9★★★★★Google rating, 100+ reviews
Installed Aluglobus gates
Installed Aluglobus gatesInstalled Aluglobus gatesInstalled Aluglobus gatesInstalled Aluglobus gatesInstalled Aluglobus gates
Read all reviews

Valley One Gates & Access

★★★★★

“We use Aluglobus 100% with every fence/gate job we have. As a contractor I can say they are working very hard and their product is highest quality I can find and the best price.”

Contractor

Zohar Schneider

31 Jul 2025

“This company offers exceptional quality at unbeatable prices and provides top-notch customer service. I’ve been using them regularly for my projects in Los Angeles, and I love their aluminum gates and fences.”

Google review

Albert Torcaso

17 Sep 2025

“AluGlobus delivered a custom gate that is not only gorgeous but also highly functional. We love it!”

Google review

Jim Monahan

★★★★★

“AluGlobus was extremely helpful with my order, answering all my questions and delivering everything to Texas in perfect condition. The products were well-packed in a solid wood crate, and excellent quality.”

Shipped to Texas

Tiffany Salguero

28 Aug 2025

“I’m thrilled with the custom gate AluGlobus made for us. The team’s attention to detail was amazing.”

Google review

Cynthia Dalessandro

10 Sep 2025

“The AluGlobus team was fast, friendly, and professional. The gate looks beautiful, and we are very satisfied.”

Google review

Semra Sevim

8 Sep 2025

“AluGlobus was able to create a custom gate that matched our vision. The quality is outstanding!”

Google review

Michael Sharp

16 Sep 2025

“I’m beyond impressed with the custom gate AluGlobus made for us. They delivered exactly what we asked for.”

Google review

Wendy Van Den Berg

29 Aug 2025

“Very professional and efficient installation by AluGlobus Fence. Our new gate is sturdy and looks fantastic.”

Google review

Bonnie Paulson

9 Apr 2025

“AluGlobus Fence was a pleasure to work with. The installation was fast, and the gate looks fantastic.”

Google review

Patricia Williams

12 Sep 2025

“I highly recommend AluGlobus for your gate installation. The service was quick, and the results are excellent.”

Google review

Cecil Chavez

9 Apr 2025

“AluGlobus Fence exceeded my expectations with their high-quality gates and quick installation.”

Google review

Daymond John shaking hands with the Aluglobus team at the Aluglobus booth
At the Aluglobus booth

Seen at our booth

Daymond John put his hands on our gate.

The entrepreneur and Shark Tank investor stopped by the Aluglobus booth, shook the gate to test it, and talked about how strong it is.

“This thing is a real deal.”

“Excellent stuff.”

Daymond John, at the Aluglobus booth
Build your gate

Narrow it down

How the ALU40 HD sliding gate compares.

ALU40 HD sliding gateAluglobus HD swing gateWood gateSteel gate
Best forDriveways with side runbackDriveways with swing clearance——
Swing space✓ None, slides along the fence✕ Needs the full arc✕ Needs the full arcVaries
Rust✓ Never✓ Never—✕ Rusts
Rot, warp, termites✓ None✓ None✕ Yes✓ None
Repainting✓ Not needed✓ Not needed✕ Regularly✕ Touch-ups
Non-combustible✓ Yes✓ Yes✕ No✓ Yes
PrivacySlatted, 3/8″ gapSlat or full privacyVariesVaries

See sliding gates built

Sliding gate installation done right
Sliding gate installation done right
Sliding gate construction techniques
Sliding gate construction techniques
An Aluglobus aluminum sliding gate
An Aluglobus aluminum sliding gate

More from the Aluglobus channel

Sliding gates, frames and the factory.

A sliding gate built for the project, not pulled from a shelf
A sliding gate built for the project, not pulled from a shelf
You're not buying a gate, you're buying the factory
You're not buying a gate, you're buying the factory
ALU60 + ALU20 fence and sliding gate, prep to finish
ALU60 + ALU20 fence and sliding gate, prep to finish
Why gate frames matter: framed vs no-frame gates
Why gate frames matter: framed vs no-frame gates
HD vs Universal gate systems
HD vs Universal gate systems
Why contractors are switching to 7-stage powder coated aluminum
Why contractors are switching to 7-stage powder coated aluminum

How it works

Six steps that determine how the gate will move.

  1. Prepare the installation areaConfirm the opening, side runback, finished grade, drainage, utilities, and a suitable foundation. Secure the support and guide posts for the actual loads and site.
  2. Assemble the gate frameUse the supplied inner corner brackets and connectors to build the frame square, level, and to the approved dimensions.
  3. Install the sliding mechanismSet the channel or track straight and level. Attach the wheels and upper guide roller so the leaf travels without binding or excessive movement.
  4. Set the stopper and catcherPosition the stopper and catcher to control travel, support the closed gate, and protect the hardware from overrun.
  5. Plan the optional motorThe gate is sold without a motor. Choose a compatible operator, power, controls, safety devices and emergency access for your site.
  6. Make final adjustmentsTighten fasteners, verify clearances, clean the track, check the guide and stopping points, and test the complete travel repeatedly before regular use.

FAQ

Questions about the ALU40 18′ × 6′ sliding gate.

Is this sliding gate suitable for residential use?

Yes, it is ideal for large residential driveways, especially where space does not allow for a swing gate.

Can this gate be automated?

Yes. The system is compatible with most sliding gate motors and automation systems for remote or keypad access.

Does aluminum rust over time?

No. Aluminum is naturally corrosion-resistant and will not rust, making it perfect for long-term outdoor use.

How much maintenance does the gate require?

Very minimal. Occasional cleaning and basic track maintenance are enough to keep it operating smoothly.

What makes a sliding gate better than a swing gate?

Sliding gates are ideal for properties with limited space or sloped driveways, as they do not require clearance to open inward or outward.

Still not sure? Call (888) 876-3006 or send us your project.

Description

The ALU40 HD sliding gate 18′ × 6′ is a heavy-duty aluminum sliding gate kit for driveway openings. A 4″ HD aluminum frame, ALU40 4″ slats and matched sliding hardware come together as one coordinated system in USA 6063-T6 aluminum with an AAMA 2604 architectural powder coat.

Specifications
Gate size18′ × 6′ (W × H)
OperationHorizontal sliding
Frame4″ HD aluminum
InfillALU40 4″ slats
Slat gap3/8″
Material6063-T6 aluminum
FinishAAMA 2604 powder coat
Posts3″, 4″ or 6″ (sold separately)
Made inUSA
What's in the box
  • 4″ HD aluminum gate frame
  • Pair of 2½″ C-wheels with bolts and washers
  • 6″ guide roller and gate catcher
  • 2⅛″ C-track and gate stopper
  • Installation screws
Posts

Posts are sold separately. Choose 3″, 4″ or 6″ aluminum posts based on gate weight, site conditions and structural requirements.

Planning your opening

Confirm the finished opening, side runback for the full gate width, grade, drainage, utilities and a suitable track foundation before you order. Confirm the slide direction too.

Automation

The gate is sold without a motor. If you plan to automate it, choose a compatible operator, power, mounting, safety devices and emergency access for your site.

Finish care

Rinse now and then, especially near the coast. Appearance over time depends on climate, cleaning and wear.

Fire safety

Aluminum is non-combustible and does not burn under normal fire conditions. Smoke developed: 0.

FAQ

Buyer questions about the aluminum sliding gate kit.

Still not sure? Call (888) 876-3006 or send us your project.

How much space does a sliding gate need?

Plan side runback along the fence line for the full width of the gate, plus room for the catcher and stopper.

Can I add an automatic gate opener?

Yes. The gate is sold without a motor; add a compatible sliding gate operator. Aluminum keeps the gate light, which is easier on the opener.

Is aluminum strong enough for a driveway gate?

Yes. The leaf is built on a 4″ heavy-duty aluminum perimeter frame; posts are chosen by gate weight and site, with 3″, 4″ or 6″ options.

Sliding gate vs swing gate?

A sliding gate needs no swing clearance, so it suits sloped or short driveways where a swing gate would hit cars or the ground.

Full product description: Aluminu Gate Kit Alu40 18X6 S.G HD USA SLIDING

The ALU40 18′ × 6′ HD Sliding Gate Kit is a strong aluminum gate system made for wide openings and high-traffic areas. Built from premium 6063-T6 aluminum, it delivers exceptional strength, smooth operation, and long-lasting durability with minimal maintenance.

This system is ideal for both contractors and property owners who want a modern, clean look. The sliding design is perfect for areas where space is limited, as the gate moves parallel to the fence rather than swinging outward.

Key Features

Feature Details
Frame Heavy-duty 4″ HD aluminum frame for maximum strength
Design Sliding configuration – saves space in tight areas
Track System C-track system for smooth and reliable gate movement
Material 6063-T6 aluminum – rust-proof and corrosion-resistant
Finish Powder-coated for UV and weather protection
Aesthetic Modern horizontal slat design for a sleek appearance

* {
box-sizing: border-box;
margin: 0;
padding: 0;
}
.grid-wrapper {
max-width: 100%;
margin: 0 auto;
height: 90vh; /* adjust overall height */
display: grid;
grid-template-columns: 2fr 1fr 1fr; /* big left, two right columns */
grid-template-rows: repeat(3, 1fr); /* 3 rows */
gap: 10px;
overflow: hidden;
}
.grid-item {
position: relative;
overflow: hidden;
}
.grid-item img {
width: 100%;
height: 100%;
object-fit: cover;
display: block;
filter: brightness(0.85);
transition: transform 0.4s ease, filter 0.4s ease;
}
.grid-item:hover img {
transform: scale(1.03);
filter: brightness(1);
}
/* layout spans */
.item-large {
grid-row: 1 / span 3; /* tall on the left */
grid-column: 1 / 2;
}
.item-2 { grid-row: 1 / 2; grid-column: 2 / 3; }
.item-3 { grid-row: 2 / 3; grid-column: 2 / 3; }
.item-4 { grid-row: 3 / 4; grid-column: 2 / 3; }
.item-5 { grid-row: 1 / 2; grid-column: 3 / 4; }
.item-6 { grid-row: 2 / 4; grid-column: 3 / 4; } /* tall on bottom-right */
/* Optional tiny text in corners like in screenshot */
.grid-label {
position: absolute;
bottom: 10px;
left: 10px;
font-size: 30px;
color: #fff;
letter-spacing: 0.08em;
text-transform: uppercase;
opacity: 0.85;
}
.grid-labelz {
position: absolute;
bottom: 10px;
left: 10px;
font-size: 50px;
color: #fff;
letter-spacing: 0.08em;
text-transform: uppercase;
opacity: 0.85;
}
/* Tablets and small laptops */
@media (max-width: 1024px) {
.grid-wrapper {
height: 70vh; /* shrink overall layout */
gap: 8px;
}
.grid-label {
font-size: 22px;
}
}
/* Small mobile */
@media (max-width: 620px) {
.grid-wrapper {
height: 25vh;
gap: 2px;
}
.grid-label {
font-size: 12px;
position: absolute;
bottom: 5px;
left: 4px;
color: #fff;
letter-spacing: 0.08em;
text-transform: uppercase;
opacity: 0.85;
line-height: 1.5;
}
.grid-labelz {
font-size: 14px;
}
}
/* Small mobile */
@media (max-width: 620px) {
.grid-wrapper {
/* keep grid, just change layout */
height: auto;
gap: 2px;
grid-template-columns: 1fr 1fr; /* 2 columns */
grid-template-rows: repeat(4, auto); /* 4 rows total */
}
/* Row 1: item-large full width */
.item-large {
grid-column: 1 / 3; /* span both columns */
grid-row: 1 / 2;
}
/* Row 2: item-2 | item-5 */
.item-2 {
grid-column: 1 / 2;
grid-row: 2 / 3;
}
.item-5 {
grid-column: 2 / 3;
grid-row: 2 / 3;
}
/* Row 3 + 4: left column stacked, right tall item-6 */
.item-3 {
grid-column: 1 / 2;
grid-row: 3 / 4;
}
.item-4 {
grid-column: 1 / 2;
grid-row: 4 / 5;
}
.item-6 {
grid-column: 2 / 3;
grid-row: 3 / 5; /* spans rows 3 and 4 */
}
}


Full-Frame Strength

Universal Slat Compatibility
Long-Lasting Powdercoat
Reinforced Hinge Support

Premium Aluminum Construction
Easy DIY Installation

 

Built for DIY – Installed in Minutes

 

See how our universal gate system goes together quickly and cleanly

 

 

One System. Endless Compatibility

 

Frame adjusts to fit multiple gate sizes, styles, and lock setups right on the spot.

 

 

Engineered for Strength & Durability

 

From 6063-T6 aluminum to AAMA-2604 powder coating, rust-free, weather-ready

 

.features {
display: flex;
gap: 100px; /* desktop spacing */
color: #bbb;
font-family: Arial, sans-serif;
}
/* each block */
.feature-item {
flex: 1;
transition: color 0.3s ease;
text-align: center; /* so you can drop the tags */
}
.feature-item h3 {
margin-bottom: 10px;
color: #ddd;
}
/* hover effects (desktop) */
.features:hover .feature-item h3 {
color: #666;
}
.features:hover .feature-item:hover {
color: #fff;
}
.features:hover .feature-item:hover h3 {
color: #fff;
}
/* ===== MOBILE STYLES ===== */
@media (max-width: 768px) {
.features {
flex-direction: column; /* stack items */
gap: 24px; /* smaller gap */
padding: 0 16px; /* little side padding */
}
.feature-item {
text-align: center;
}
.feature-item h3 {
font-size: 18px;
line-height: 1.3;
}
.feature-item p {
font-size: 14px;
line-height: 1.5;
margin: 0;
}
}
* {
box-sizing: border-box;
margin: 0;
padding: 0;
}
.grid-wrapper {
max-width: 100%;
margin: 0 auto;
height: 90vh; /* adjust overall height */
display: grid;
grid-template-columns: 2fr 1fr 1fr; /* big left, two right columns */
grid-template-rows: repeat(3, 1fr); /* 3 rows */
gap: 10px;
overflow: hidden;
}
.grid-item {
position: relative;
overflow: hidden;
}
.grid-item img {
width: 100%;
height: 100%;
object-fit: cover;
display: block;
filter: brightness(0.85);
transition: transform 0.4s ease, filter 0.4s ease;
}
.grid-item:hover img {
transform: scale(1.03);
filter: brightness(1);
}
/* layout spans */
.item-large {
grid-row: 1 / span 3; /* tall on the left */
grid-column: 1 / 2;
}
.item-2 { grid-row: 1 / 2; grid-column: 2 / 3; }
.item-3 { grid-row: 2 / 3; grid-column: 2 / 3; }
.item-4 { grid-row: 3 / 4; grid-column: 2 / 3; }
.item-5 { grid-row: 1 / 2; grid-column: 3 / 4; }
.item-6 { grid-row: 2 / 4; grid-column: 3 / 4; } /* tall on bottom-right */
/* Optional tiny text in corners like in screenshot */
.grid-label {
position: absolute;
bottom: 10px;
left: 10px;
font-size: 30px;
color: #fff;
letter-spacing: 0.08em;
text-transform: uppercase;
opacity: 0.85;
}
.grid-labelz {
position: absolute;
bottom: 10px;
left: 10px;
font-size: 50px;
color: #fff;
letter-spacing: 0.08em;
text-transform: uppercase;
opacity: 0.85;
}
/* Tablets and small laptops */
@media (max-width: 1024px) {
.grid-wrapper {
height: 70vh; /* shrink overall layout */
gap: 8px;
}
.grid-label {
font-size: 22px;
}
}
/* Small mobile */
@media (max-width: 620px) {
.grid-wrapper {
height: 25vh;
gap: 2px;
}
.grid-label {
font-size: 12px;
position: absolute;
bottom: 5px;
left: 4px;
color: #fff;
letter-spacing: 0.08em;
text-transform: uppercase;
opacity: 0.85;
line-height: 1.5;
}
.grid-labelz {
font-size: 14px;
}
}
/* Small mobile */
@media (max-width: 620px) {
.grid-wrapper {
/* keep grid, just change layout */
height: auto;
gap: 2px;
grid-template-columns: 1fr 1fr; /* 2 columns */
grid-template-rows: repeat(4, auto); /* 4 rows total */
}
/* Row 1: item-large full width */
.item-large {
grid-column: 1 / 3; /* span both columns */
grid-row: 1 / 2;
}
/* Row 2: item-2 | item-5 */
.item-2 {
grid-column: 1 / 2;
grid-row: 2 / 3;
}
.item-5 {
grid-column: 2 / 3;
grid-row: 2 / 3;
}
/* Row 3 + 4: left column stacked, right tall item-6 */
.item-3 {
grid-column: 1 / 2;
grid-row: 3 / 4;
}
.item-4 {
grid-column: 1 / 2;
grid-row: 4 / 5;
}
.item-6 {
grid-column: 2 / 3;
grid-row: 3 / 5; /* spans rows 3 and 4 */
}
}




https://vimeo.com/1139029104

Product Overview

The Alu40 18′ × 6′ S.G. Gate (NEW) HD USA Sliding Gate Kit is a heavy-duty aluminum sliding gate system engineered for extra-wide openings, high-traffic access points, and modern architectural projects. Designed for professional installation, this gate delivers industrial-strength performance while maintaining a clean, contemporary appearance.

Built from reinforced HD USA aluminum and paired with the NEW Alu40 black infill system, this sliding gate eliminates the corrosion, warping, and maintenance issues common with steel or wood gates. Its 18-foot width makes it ideal for large residential driveways, commercial entrances, and multi-vehicle access points where reliability and smooth operation are critical.

In short, this gate matters because it provides a factory-engineered, large-span sliding gate solution that installs precisely, operates smoothly, and performs consistently under demanding daily use.

Benefits: Why Contractors and Property Owners Choose It

The Alu40 18′ × 6′ Sliding Gate Kit (HD USA – NEW) is designed to deliver structural strength, dependable movement, and long-term durability across wide spans.

Key benefits include:

  • Heavy-duty HD USA aluminum construction: Reinforced 4″ aluminum frame resists flexing and sag across long openings.

  • Space-efficient sliding design: Ideal for sites where swing gates are impractical or restricted.

  • Smooth and stable operation: Precision C-track, guide roller, and gate stopper ensure controlled, reliable movement.

  • Low maintenance performance: Aluminum construction will not rust, warp, or require repainting.

  • Modern visual appeal: Clean horizontal layout with black Alu40 infill complements contemporary architecture.

  • Contractor-ready system: Engineered components reduce install time and ensure consistent, repeatable results.

For contractors, this means fewer adjustments and long-term performance confidence. For property owners, it means a secure, visually striking gate that holds up over time.

Design & Durability: Materials, Finishes, Customization

The gate frame is constructed from 20 feet of 4″ HD USA aluminum, engineered to maintain rigidity across extended spans. Reinforced inner corner brackets and internal connectors ensure structural alignment, while the channel system supports smooth, controlled gate travel.

The system includes the NEW Alu40 6′ black infill, finished with a durable powder-coat designed to resist UV exposure, corrosion, and surface wear. A 3″ aluminum cap completes the top edge for a clean, finished appearance.

Included Gate Kit Parts:

  • 20′ Gate Frame – 4″ HD USA Aluminum

  • Inner corner brackets

  • Inner connector

  • Channel kit

  • 6″ guide roller

  • Gate catcher

  • C-track – 2⅛″

  • Gate stopper

  • (NEW) Alu40 6′ black infill

  • 3″ aluminum cap

  • #12 × 2″ black screws

  • #10 × ¾″ screws

Post Options:

  • 3″ aluminum post

  • 4″ aluminum post

  • 6″ aluminum post

These post sizes allow installers to match structural requirements, gate weight, and site conditions with confidence.

/* Make WooCommerce single product page full width */
.single-product #main-container.container {
max-width: 100% !important;
width: 100% !important;
padding-left: 0 !important;
padding-right: 0 !important;
}
/* Remove row side gaps if your theme adds them */
.single-product #main-container > .row {
margin-left: 0 !important;
margin-right: 0 !important;
}
.img-bullets {
display: flex;
align-items: flex-start;
gap: 30px; /* space between image and bullets */
margin: 20px 0;
}
/* Make sure the list takes proper width */
.img-bullets ul {
margin: 0;
padding-left: 20px;
font-size: 16px;
line-height: 1.5;
}
/* MOBILE — stack vertically */
@media (max-width: 768px) {
.img-bullets {
flex-direction: column;
text-align: left;
}
.img-bullets img {
margin: 0 auto; /* center image on mobile */
}
}
@media only screen and (min-width: 600px) {
.custom-header-video-wrapper{
margin-top: -130px;
}
}

Frequently Asked Questions

Is this sliding gate suitable for residential use?

Yes, it is ideal for large residential driveways, especially where space does not allow for a swing gate.

Can this gate be automated?

Yes. The system is compatible with most sliding gate motors and automation systems for remote or keypad access.

Does aluminum rust over time?

No. Aluminum is naturally corrosion-resistant and will not rust, making it perfect for long-term outdoor use.

How much maintenance does the gate require?

Very minimal. Occasional cleaning and basic track maintenance are enough to keep it operating smoothly.

What makes a sliding gate better than a swing gate?

Sliding gates are ideal for properties with limited space or sloped driveways, as they do not require clearance to open inward or outward.

Yes, it is ideal for large residential driveways, especially where space does not allow for a swing gate.

Yes. The system is compatible with most sliding gate motors and automation systems for remote or keypad access.

No. Aluminum is naturally corrosion-resistant and will not rust, making it perfect for long-term outdoor use.

Very minimal. Occasional cleaning and basic track maintenance are enough to keep it operating smoothly.

Sliding gates are ideal for properties with limited space or sloped driveways, as they do not require clearance to open inward or outward.

Warranty
25-year limited manufacturer warranty on covered gate and fence aluminum materials.

Written terms and exclusions apply. Finish and hardware coverage differ; ask for the written terms with your quote.

Powder coating
Pretreated in 7 stages. Powder coated before assembly. Coated 360°.

AAMA 2604 architectural finish with AkzoNobel and TIGER powders, baked in a 110 ft cure oven.

TIGER CoatingsAkzoNobel

Locations

Showrooms, wholesale and partners near you.

See gates in person at an Aluglobus showroom, pick up from a wholesale location, or work with an authorized partner. Nationwide U.S. shipping from the factory everywhere else.

Project supportLos AngelesOrange CountySan DiegoBay AreaSacramentoLancasterRancho CucamongaIndioNationwide shipping
Call (888) 876-3006All contact options

Mon to Fri, 9:00 AM to 5:00 PM

Let's plan your driveway gate.

Need a different width, a motor plan or a project price? Send your opening, runback and photos and a specialist will get back to you.

Real projects

ALU 40 black slat gates in real projects

Completed installations by Aluglobus Aluminum Systems using this system. Sizes, layouts and accessories vary by project.

Watch

See it built and installed

Installation, product and factory videos from Aluglobus Aluminum Systems.

Specifications

Technical details

Check sizes, material and configuration against your project before ordering.

Gate size
18′ W × 6′ H, sliding
Frame
4″ HD USA aluminum (2 in × 4 in; 3 × 20 ft + 1 × 12 ft)
Infill
43 pcs ALU40 slats, black, 3/8″ gap
Material
6063-T6 aluminum
Finish
Black powder coat, AAMA 2604
Rolling hardware
6″ guide roller, gate catcher, gate stopper, 2⅛″ C-track (4 × 10 ft)
Also included
inner corner brackets, inner connector, channel kit, 3″ aluminum cap, #12 × 2″ black screws, #10 × ¾″ screws
Post options (sold separately)
3″, 4″ or 6″ aluminum posts
Product views & drawings2 images

Ready when you are

Ready to start your project?

Order online or send your project details for a factory-direct quote.

Get Wholesale Pricing

Contractor or dealer pricing, or our full e-catalog. Tell us what you need and our wholesale team will get back to you.

10% off Premium Aluminum Woodgrain Collection

Limited Promotional Inventory

CONTRACTORS ONLY

Claim Your 10% Off

Send us your information and our team will help you check available woodgrain colors, profiles and current promotional inventory.

Valid on qualifying projects only. Minimum project value required. Restrictions may apply.

Aluglobus Aluminum Systems (White)

Wholesale buyers get $150 OFF their order for a limited time.

Factory-direct pricing. Contractor-ready systems. Limited-time promo.

No stacking with other discounts.

Aluglobus logo 1 |  | Aluglobusfence.com

FREE DIGITAL MAGAZINE

Discover all our aluminum fences, gates, and cladding with full specifications and pricing. Enter your email below, and we’ll send the complete magazine straight to your inbox.

Request a call
Just leave a request and we will provide you with professional advice.
Leave your request
Leave a request and we will contact you within 15 minutes.