01Why people shift to sliding gatesA sliding leaf moves parallel to the fence line and does not swing into the driveway. That makes it practical where vehicles park close to the opening, the driveway is compact, or a swing arc would interfere with daily use. The project still needs enough clear side runback for the complete gate leaf.
02Straightforward horizontal designThe ALU20 slat layout creates clean, continuous horizontal lines. The open spacing balances partial privacy, airflow, and visibility instead of closing the entrance with a fully solid panel.
03What changes after installationThe entrance opens without taking over the front or rear driveway area. Aluminum eliminates rust staining associated with ferrous steel and does not need the staining schedule of wood. Daily use becomes cleaner when the track, wheels, guide, catcher, and stopper are aligned correctly.
04Lightweight does not mean unframed6063-T6 aluminum helps control weight while the heavy-duty perimeter and secondary frame provide the gate's structural backbone. The slats complete the design, but the frame, wheel connections, and guide system carry the moving assembly.
05Motor-ready planningThe included U bracket supports future automation planning. A compatible operator, power, mounting, access controls, safety devices, emergency access, and duty cycle must be selected for the finished gate and actual site.
06Wide-opening coordinationAn 18-foot sliding leaf needs careful coordination between the gate frame, track foundation, wheel positions, upper guide, receiving catcher, post rigidity, wind exposure, and the available runback beside the opening. The larger span should be planned as one moving system, not as separate parts selected after construction.
01Superior strength and stabilityHeavy-duty aluminum framing supports the moving gate leaf and keeps the slats contained inside a real structural perimeter.
02Weather-resistant aluminumThe aluminum substrate will not rust like steel, while the exterior powder-coated finish is designed for long-term outdoor exposure.
03Space-saving sliding designThe gate travels alongside the fence line instead of swinging through the driveway, provided adequate side runback is available.
04Customizable architectural styleCoordinate slat spacing, post selection, finish, automation, and adjacent fencing for a unified property entrance.
01Prepare the installation areaConfirm the opening, side runback, finished grade, drainage, utilities, and a suitable foundation. Secure the support and guide posts for the actual loads and site.
02Assemble the gate frameUse the supplied inner corner brackets and connectors to build the perimeter and secondary frame square, level, and to the approved dimensions.
03Install the sliding mechanismSet the channel or track straight and level. Attach the C wheels and upper guide roller so the leaf travels without binding or excessive movement.
04Set the stopper and catcherPosition the stopper and catcher to control travel, support the closed gate, and protect the hardware from overrun.
05Plan the optional motorInstall the included motor bracket only as required for the selected operator. Coordinate power, controls, loops, photo eyes, edges, emergency access, and required safety devices.
06Make final adjustmentsTighten fasteners, verify clearances, clean the track, check the guide and stopping points, and test the complete travel repeatedly before regular use.