alucap 1800x | 2.75 Flat Aluminum Post Cap | Aluglobusfence.com

2.75 2-way Post 11 ft – Black + Cap + Cover

Q: Is the post really 11 feet long?

Yes. This SKU is the 11-foot version. The extra length provides flexibility for finished fence height, grade conditions and footing depth.

Q: How deep should an 11-foot aluminum post be installed?

There is no single footing depth for every project. Required embedment depends on fence height, wind exposure, soil conditions, post spacing, panel type and local structural requirements.

$15.97 – $160.23

Aluglobus Aluminum Fence Components

Heavy-duty 2.75″ aluminum 2-way post designed for straight fence runs where
panels connect from opposite sides. The 11 ft length provides added flexibility
for taller installations or deeper post setting, while the black architectural
powder-coated finish creates a clean, low-maintenance exterior.

Profile
2.75″

Length
11 ft

Configuration
2-Way Post

Color
Black

Material
6063-T6 Architectural Aluminum

Coating
AAMA 2604 Super-Durable Powder Coat

Primary Use
Straight-Line Fence Connections

Corrosion Resistance
Rust-Resistant Aluminum Construction

Included Components
2-Way Post + Matching Cap + Cover

Compatibility
Compatible Aluglobus Aluminum Fence Systems

2-way configuration:
designed primarily for line-post locations where the fence continues in
two opposite directions. Confirm panel profile, channels, post depth, and
complete system compatibility before installation.

Add to cart

Buy Now

Categories: Aluminum Fences - DIY Fence Kit Post, Aluminum Gates, Build your own DIY Gates, Individual Profiles, Posts

Description

Product Description

2.75″ Post System · 11 ft · Black

The fence line is only as straight as the post holding it.

The 2.75″ 2-Way Aluminum Post is an 11-foot architectural post for continuous straight fence runs. Manufactured from 6063-T6 aluminum and finished in black with an AAMA 2604 super-durable powder-coat specification, it gives contractors and serious DIY builders a clean support profile with extra length for project-specific height and footing conditions.

Choose post options View specifications

2.75 inch two-way 11 foot black aluminum fence post

Post + finishing cap + cover system

Profile2.75″ aluminum post

Length11 ft

Configuration2-way straight-run post

Alloy6063-T6 aluminum

FinishBlack · AAMA 2604

What “2-way” actually means

Two opposing connection sides. One continuous fence line.

This profile is built for line-post locations where fence sections continue on both sides of the same post. The two-way geometry keeps the panel connection organized inside one consistent architectural post profile.

Straight-run configurationUse it where the fence continues through the post in the same general direction.

Panels connect on both sidesThe post becomes the shared structural connection between adjacent fence sections.

Not the default corner postFor a 90-degree corner, end condition, gate hinge point or specialty junction, use the post profile specified for that condition.

Fence panel Fence panel

Top-view concept
2-way line-post connection

Complete the post cleanly

Post, cap and cover work together as one finished detail.

The structural post does the load-carrying work. The matching cover and selected cap finish the exposed profile so the fence looks intentional from panel to panel.

11 foot black 2.75 inch two-way aluminum post

Structural component

2.75″ 2-Way Post · 11 ft

Architectural aluminum line post for connecting fence sections on opposing sides while keeping the run straight, aligned and visually consistent.

Finishing component

Matching Post Cover

Closes the unused visible channel area after the fence sections are installed, creating a cleaner finished post face.

Top finish

2.75″ Cap Option

Finishes the open post top and helps keep rain, dirt and debris out of the extrusion. Select the cap style offered for the project configuration.

Why 11 feet matters

Extra length gives the installer more control before the post is cut or set.

An 11-foot extrusion is not only about building a taller fence. It creates useful installation flexibility when footing depth, grade changes, finished fence height or field conditions require more post length.

More embedment flexibility

Longer stock gives the installer room to coordinate the below-grade portion of the post with the actual footing design instead of starting with a short profile.

Taller fence planning

Projects using taller fence sections can begin with an 11-foot post and establish the final cut length around the engineered or approved layout.

Better grade management

Sloped and stepped sites often need more vertical adjustment from one post location to the next. Extra stock length helps preserve that flexibility.

Contractor-friendly stock

A longer extrusion can be cut for the field condition, helping crews standardize material ordering across projects with different finished heights.

Installation note: 11 ft is the supplied post length. Finished above-grade height and footing depth should be determined from the fence design, soil conditions, wind exposure, local requirements and the selected Aluglobus system.

Technical specifications

A simple profile with the specifications that matter.

Posts are easy to overlook because most of the visual attention goes to the fence panels. Structurally, they are one of the first components that should be confirmed.

Product type: 2-way aluminum fence line post
Nominal profile: 2.75 inches
Supplied length: 11 ft
Material: 6063-T6 architectural aluminum
Finish: Black architectural powder coat
Coating specification: AAMA 2604 super-durable powder coating
Configuration: Two-way connection for straight-line fence runs
Panel connection: Accepts compatible fence sections on opposing sides
Corrosion behavior: Aluminum does not develop iron-oxide rust like steel or iron
Exterior use: Designed for outdoor residential and commercial fence systems
Finishing pieces: Matching cap and post-cover options coordinate the finished post
System fit: Confirm rail, infill and hardware compatibility for the exact Aluglobus fence configuration before ordering

Why aluminum posts keep winning

The market has moved toward coated aluminum for one reason: less maintenance without giving up a finished architectural look.

For modern fence systems, contractors increasingly look for corrosion resistance, durable coatings, clean accessories and repeatable assembly. The post needs to support the system without becoming the maintenance problem later.

What matters	2.75″ Aluminum Post	Typical Wood Post	Typical Steel Post
Iron-oxide rust	No	Not applicable	Possible if coating is damaged or inadequate
Rot / insect decay	No structural wood	Possible over time	Not applicable
Exterior finish	Architectural powder coat	Paint, stain or sealer commonly used	Paint, galvanizing or powder coat commonly used
Routine refinishing	Low	Often required	Depends on coating and exposure
Modern accessory integration	Matching covers and caps	Varies by system	Varies by system
Material combustibility	Non-combustible metal substrate	Combustible	Non-combustible metal substrate

Where this post belongs

Use it where the fence needs a continuous, straight structural connection.

The 2-way profile is most useful as a repeating line-post condition. Exact rail, slat, board and bracket compatibility should always be checked against the system being built.

Residential

Modern property lines

Support horizontal aluminum or compatible fence sections along side yards, backyards and long residential boundaries.

Privacy

Full and semi-private fence runs

Use the post as the repeating structural connection between compatible privacy panels where clean alignment matters.

Commercial

Perimeter enclosures

Create organized straight runs around multi-family, office, hospitality and light-commercial properties.

Coastal

Humid and salt-air projects

Aluminum avoids iron-oxide rust and the AAMA 2604 coating specification is intended for durable architectural exterior exposure.

Design-led

Black architectural systems

The dark post visually recedes behind many black, wood-look and contemporary infill designs so the fence surface stays dominant.

Contractor supply

Cut-to-project field planning

The 11-foot stock length gives installers room to coordinate final cut length, footing and finished fence height for the project.

See the post in the system

The goal is not to make the post disappear. It is to make the whole fence read as one system.

Aluglobus aluminum fences use clean rails, controlled spacing and coordinated posts so the structural components support the architecture instead of interrupting it.

modern aluminum fence installed along residential property boundary

Straight, repeatable post alignment across a modern fence run

aluminum fence installed at villa entrance with architectural posts

Architectural aluminum fence application

full privacy aluminum tongue and groove fence

Full-privacy aluminum system

modern aluminum fence panel and post installation

Clean panel-to-post transitions

Installation planning

Set the post line first. The fence will follow it.

A premium fence can still look wrong if the posts drift out of line, twist during the pour or are cut before final elevations are confirmed. Treat layout and footing as part of the system design.

Before setting posts: confirm property line, post spacing, finished fence height, rail locations, gate openings, slope strategy, footing method and any local permit or engineering requirements.

Lay out the complete fence run

Mark line-post locations from the actual panel or rail dimensions. Keep gate, corner and end-post conditions separate from the repeating 2-way line-post locations.

Establish finished elevations

Use a laser, level or string line to define the intended top line and identify grade changes before cutting or setting the 11-foot posts.

Prepare the footing or mounting condition

Use the footing, embedment or engineered base condition required for the fence height, soil, wind exposure and local requirements. Do not assume one footing depth fits every project.

Set every post plumb and in line

Check vertical plumb in both directions and sight the entire post line before the footing is finalized. Small post errors become obvious after long panels are installed.

Install compatible fence sections

Connect the adjacent fence panels or rails to the two opposing post sides according to the selected Aluglobus system and hardware.

Finish with cover and cap

Install the matching channel cover and selected post cap after alignment and fastening are complete, then clean the powder-coated surfaces.

Small parts. Big finish.

The cap and cover are not afterthoughts.

A clean aluminum fence is defined by what you do not see. Matching finishing pieces help hide open channels and exposed post tops, protecting the detail while keeping the line visually quiet.

Close the post topA properly fitted cap limits rain, dirt and debris from entering the open extrusion.

Hide unused channelThe matching cover finishes the visible channel area that remains after the fence section is installed.

Keep the color consistentBlack finishing pieces keep the support detail coordinated with the black post rather than introducing a mismatched accessory.

Make maintenance easierFewer open cavities and unfinished edges mean fewer places for debris to collect around the finished fence line.

Specification checklist

Before you order 30 posts, verify these six things once.

Contractor efficiency comes from eliminating surprises before material reaches the site.

Post condition

Confirm this is a straight-run location. Corners, ends and gate points may require different post profiles or heavier structural members.

Fence system

Identify the exact Aluglobus slat, rail, T&G, composite-look or other compatible system so channel and hardware fit can be confirmed.

Finished height

Determine the visible fence height and grade strategy before deciding where the 11-foot extrusion will be cut.

Footing / base

Confirm whether the project uses in-ground concrete, an engineered base condition or another approved mounting method.

Cap style

Choose the cap option that matches the intended appearance and the accessory combination selected on the product page.

Quantity

Count all line-post positions separately from end, corner and gate posts so the material list matches the actual fence layout.

Color match

Coordinate the black post with black rails, covers and accessories or confirm any custom-color requirement before fabrication.

Shipping length

Plan receiving, storage and handling for 11-foot extrusions so profiles stay supported and protected before installation.

Frequently asked questions

What contractors and homeowners should know about the 2.75″ 2-way 11 ft post.

The right post depends on where it sits in the layout, what connects to it and how the project is mounted.

What is a 2-way aluminum fence post used for?

A 2-way post is primarily a line post for a continuous straight fence run. Compatible fence sections connect to opposing sides of the same post, allowing the post to support the transition from one panel to the next while maintaining alignment.

Is the post really 11 feet long?

Yes. This SKU is the 11-foot version. The extra length gives installers more flexibility for finished fence height, grade conditions and footing depth. The post should be cut and installed only after the project elevations and mounting conditions are confirmed.

What material and coating does it use?

The product is listed as 6063-T6 aluminum with an AAMA 2604 super-durable powder-coat specification and a black exterior finish. Aluminum does not develop iron-oxide rust like steel or iron.

Can I use this as a corner post?

This profile is intended primarily for straight-line fence runs. A 90-degree corner changes the connection geometry, so use the corner-post or project-specific post solution recommended for the selected Aluglobus fence system.

How deep should an 11-foot aluminum post be installed?

There is no single footing depth that is correct for every project. Required embedment depends on fence height, wind exposure, soil conditions, post spacing, panel type and local structural requirements. Confirm the footing design before cutting the post.

What do the cap and cover do?

The cap finishes the open top of the aluminum extrusion and helps keep debris and water out. The matching cover closes exposed channel areas that remain visible after the fence components are installed, creating a cleaner finished post.

Can this post work with aluminum and composite-style fence systems?

The 2.75-inch post family is used across compatible Aluglobus aluminum and composite-style fence applications. Exact rail, board, channel and fastener compatibility should be verified for the specific fence system before ordering.

Factory-direct aluminum profiles

Building a full fence run? Send the layout before you order the posts.

Aluglobus supplies individual profiles and complete aluminum fence systems for contractors, builders, designers and serious DIY projects, with nationwide U.S. shipping.

Choose product options Request project support

Aluglobus Aluminum Systems · Individual aluminum profiles · Fence systems · Gate systems · Nationwide supply

Trusted by investors, architects, homeowners and contractors

Watch Plug ✔

@watchplug

"I couldn't be happier with the fence. From the moment it went up, it completely transformed my backyard. The sleek design without visible posts gives it such a modern, high-end look. It's like having a piece of art around my home. I also love that it's fire-resistant, which gives me peace of mind living in this area. Definitely worth every penny!"

Mike

Home Owner

Daymond John

CEO, Entrepreneur & Investor

DW Design & Build ✔

@dannywangdesign

"We're honored to be recommended by Danny Wang Design, a premier contractor known for exceptional outdoor living spaces. In our latest collaboration, Danny created a stunning backyard and entrusted us with the gate and fence system. We're proud to be his trusted partner for quality and reliability."

Jim Monahan

★★★★★

"AluGlobus was extremely helpful with my order, answering all my questions and delivering everything to Texas in perfect condition. The products were well-packed in a solid wood crate, and excellent quality. I'm so glad I found them online. Highly recommended. I'll be buying from them again. Thanks to everyone who made it happen!"

David

Customer

Service Department

Mercedes Benz Engineer

Valley One Gates & Access

"We use Aluglobus 100% with every fence/gate job we have. As a contractor I can say they are working very hard and their product is the highest quality I can find and the best price. We're very happy working with them! Our experience working with them is always top notch."

22 July 2025

	2.75 2-way Flat Cap with screws - Black$18.21	2.75 2-way Flat Cap with screws - Black quantity
	2.75 2-way Post 11 ft - Black$160.23	2.75 2-way Post 11 ft - Black quantity
	2.75 2-way Post Convex Cap - Black$15.97	2.75 2-way Post Convex Cap - Black quantity

Shopping cart

Search

2.75 2-way Post 11 ft – Black + Cap + Cover

2.75 2-way Post 11 ft – Black + Cap + Cover

Description

Product Description

The fence line is only as straight as the post holding it.

Two opposing connection sides. One continuous fence line.

Post, cap and cover work together as one finished detail.

2.75″ 2-Way Post · 11 ft

Matching Post Cover

2.75″ Cap Option

Extra length gives the installer more control before the post is cut or set.

More embedment flexibility

Taller fence planning

Better grade management

Contractor-friendly stock

A simple profile with the specifications that matter.

The market has moved toward coated aluminum for one reason: less maintenance without giving up a finished architectural look.

Use it where the fence needs a continuous, straight structural connection.

Modern property lines

Full and semi-private fence runs

Perimeter enclosures

Humid and salt-air projects

Black architectural systems

Cut-to-project field planning

The goal is not to make the post disappear. It is to make the whole fence read as one system.

Set the post line first. The fence will follow it.

Lay out the complete fence run

Establish finished elevations

Prepare the footing or mounting condition

Set every post plumb and in line

Install compatible fence sections

Finish with cover and cap

The cap and cover are not afterthoughts.

Before you order 30 posts, verify these six things once.

Post condition

Fence system

Finished height

Footing / base

Cap style

Quantity

Color match

Shipping length

What contractors and homeowners should know about the 2.75″ 2-way 11 ft post.

Building a full fence run? Send the layout before you order the posts.

FREE DIGITAL MAGAZINE

Wholesale buyers get $150 OFF their order for a limited time.

Request a call

Leave your request