$3,831.64
Contractor-grade 12×6 double-swing aluminum gate with horizontal tongue-and-groove slats for a seamless architectural finish. The woodgrain appearance delivers the warmth of wood with a weather-resistant, low-maintenance aluminum gate system designed for on-site assembly.
The ALU50 T&G Woodgrain Contractor Line 12′ × 6′ Double Swing Gate Kit combines a reinforced 4-inch HD aluminum frame with interlocking tongue-and-groove infill for a clean privacy surface. It delivers the look of wood with architectural aluminum performance for driveways, estates, developments and contractor-built entrances.
A good gate needs to look right and last. This 12′ × 6′ ALU50 T&G Woodgrain Double Swing Gate Kit is designed around both goals, combining a natural wood-look surface with the strength and low-maintenance advantages of aluminum.
The horizontal tongue-and-groove profiles interlock to create a unified gate face rather than a row of separated slats. As part of the Contractor Line, the system prioritizes reinforced framing, consistent alignment, durable exterior finishing and efficient on-site installation.
The Contractor Line combines a rigid aluminum gate frame, interlocking woodgrain T&G profiles and heavy-duty swing hardware into one coordinated entrance system.
The Contractor Line system is designed to reduce unnecessary fabrication while keeping the gate frame, infill and hardware working together as one assembly.
Pre-fabricated components, predictable dimensions and coordinated hardware simplify on-site setup without sacrificing the heavy-duty gate structure.
The Contractor Line can be coordinated with different posts, hinge layouts, latch finishes, matching fence systems and swing-gate automation.
6063-T6 aluminum, reinforced framing and AAMA 2604 exterior finishing create a corrosion-resistant, weather-ready gate platform.
The gate package brings together the 4-inch HD frame, interlocking ALU50 T&G infill, support hinges, closing hardware and fastening components required for the two-leaf system.
2″, 2.75″ and 2″ × 3″ post profiles are shown with the product configuration. Final structural post selection should be based on the actual opening, mounting condition, hinge loading and any planned automation.
These additional views preserve the visual references supplied with the gate and show frame, infill and installation details across the aluminum system.
When the gate closes, the tongue-and-groove profiles read as one continuous architectural surface instead of a series of separated aluminum slats.
The interlocking T&G design helps keep the horizontal lines consistent and eliminates the intentionally open privacy gaps used by conventional spaced-slat systems. The woodgrain finish adds depth and natural character, making the entrance feel warmer than a typical painted metal gate.
Underneath that appearance, the gate remains aluminum. That means no structural wood swelling, cracking, termite damage or recurring wood staining and sealing. The result is a clean entry solution designed around long-term exterior use and practical maintenance.
The system combines architectural appearance with reinforced aluminum framing, weather resistance and contractor-focused installation.
6063-T6 aluminum, reinforced framing and internal bracing help the wide double-swing leaves maintain rigidity and alignment.
Aluminum does not develop iron-oxide rust or structural wood rot, making the system well suited to demanding exterior and coastal environments with proper care.
Teak, Walnut, White Oak, Ipe and other wood-look options can create a natural appearance while retaining an aluminum substrate and low-maintenance finish.
Heavy-duty hinge support and adjustable hardware allow both gate leaves to be aligned for predictable opening and closing.
Pre-engineered components and alignment-friendly hardware are designed to reduce unnecessary fabrication and help installers complete the field setup efficiently.
For homeowners, that means a refined entrance with less recurring finish work. For contractors, it means a standardized gate platform that can simplify installation, reduce field variables and coordinate with matching aluminum systems across the property.
The 12-foot two-leaf opening provides wide access while the woodgrain T&G surface delivers privacy and a coordinated modern appearance.
A secure, architectural front-entry gate for homes, estates and private properties.
Coordinate townhomes, gated communities and residential projects with a consistent wood-look aluminum gate system.
Use the Contractor Line for service areas, small businesses and other entrances that need dependable wide access.
Pair the gate with aluminum fencing, pedestrian gates and wall cladding for a cohesive exterior design.
Because the ALU50 system can coordinate with matching woodgrain fence panels, pedestrian gates and cladding, designers and builders can extend the same finish language across the full property instead of treating the driveway gate as a separate element.
The Contractor Line is built for projects where appearance and structural performance both matter, from long residential driveways to high-end architectural construction.
The wood-look pattern is a finish on aluminum, not a structural timber infill. This allows the gate to deliver natural visual warmth while retaining a non-combustible metal substrate for projects specifying non-combustible exterior materials.
The Contractor Line is supplied as a pre-engineered gate package for on-site setup, with two nominal 6-foot leaves forming the 12-foot double-swing entrance.
The installation sequence keeps the six-part structure supplied with the product while matching the Contractor Line frame, interlocking T&G surface and heavy-duty swing hardware.
Organize the gate-frame components, ALU50 T&G infill, inner brackets, channel components, hinges, stops, cane bolt, caps and fasteners in a clean work area to protect the woodgrain finish.
Assemble or verify the heavy-duty Contractor Line gate frames using the supplied frame hardware and reinforcement. Keep both leaves square and confirm the hinge side and center meeting edge before proceeding.
Install the ALU50 tongue-and-groove profiles so each board interlocks fully with the next. Maintain consistent engagement and horizontal alignment to create the intended seamless privacy surface.
Attach the heavy-duty support hinges to the structural posts or approved mounting surfaces and gate frames. Align both leaves for consistent height, clearance and smooth swing motion.
Install the required posts or finishing components, L-shape gate stops, cane bolt and latch hardware. Coordinate operator brackets and hard stops at this stage when automation is planned.
Install the aluminum caps, tighten all connections, verify the center alignment and swing path, inspect the hardware and clean the finished woodgrain aluminum surfaces.
A full-privacy double gate depends on more than the infill. The interlocking ALU50 surface, reinforced frame, hinge posts, center stops and closing hardware all need to be coordinated before final installation.
Watch the videos for a closer look at aluminum gate construction, installation details and finished architectural gate applications.
Confirm the opening, woodgrain finish, structural supports, swing direction, closing hardware and automation plan before ordering the 12′ × 6′ double-swing package.
Review material, automation, woodgrain durability, maintenance and matching-system options before finalizing the project.
Factory-direct aluminum gate systems for contractors, builders, designers, architects, developers and homeowners. Custom finish support and nationwide supply are available.
Limited Promotional Inventory
Send us your information and our team will help you check available woodgrain colors, profiles and current promotional inventory.
Discover all our aluminum fences, gates, and cladding with full specifications and pricing. Enter your email below, and we’ll send the complete magazine straight to your inbox.
Factory-direct pricing. Contractor-ready systems. Limited-time promo.
No stacking with other discounts.
Log in