Alu Max Rail ™ 1.5 Flat Profile 6′ x 6′ kit (FENCE)

$969.21

Aluglobus Max Rail Aluminum Fence System

6′ × 6′ aluminum fence kit built with Alu Max Rail™ 1.5″ flat profiles
for a clean, refined architectural appearance. The narrow flat-profile
design creates consistent modern lines while durable aluminum construction
provides a rust-resistant, low-maintenance alternative to traditional fencing.

Fence Size
6′ W × 6′ H

System
Alu Max Rail™

Profile Width
1.5″

Profile Style
Flat

Construction
Durable Aluminum Fence System

Design
Modern Flat Profile Fence Panel

Appearance
Clean Architectural Lines

Exterior Performance
Rust-Resistant Aluminum

Maintenance
Low-Maintenance Exterior Fencing

Applications
Residential & Commercial Fencing

1.5″ flat-profile design:
the narrower repeating profile gives this modern aluminum fence a refined,
detailed appearance that works well with contemporary homes, commercial
properties, landscape enclosures, and custom architectural fencing.

Add to cart

Buy Now

Categories: Aluminum Fences, Aluminum Fences - AeroLouver, Fences

Description

Product Description

Max Rail™ · 1.5 Flat Profile · 6′ × 6′ Fence Kit

A clean flat-profile aluminum fence for modern residential and commercial projects.

The Alu Max Rail™ 1.5 Flat Profile 6′ × 6′ Fence Kit uses 1.5-inch-wide aluminum profile slats to create a simple, contemporary fence surface. The system is designed for people who want straight lines, durable exterior aluminum, a powder-coated finish, and lower maintenance than traditional painted or stained fencing.

Choose product options ↑ View specifications ↓

1.5″ flat aluminum profile · minimalist fence design

Panel size6 ft × 6 ft

Profile1.5″ flat slat

MaterialAluminum

FinishPowder coated

MaintenanceLow maintenance

Product features

Minimal profile width, straight geometry, and exterior aluminum performance.

The Max Rail™ 1.5 system is built for projects where clean proportion and simple repetition matter. Its narrower flat slats create a refined visual rhythm that works naturally with contemporary architecture.

6×6 fence format

A practical nominal section size for residential and commercial fence layouts.

1.5-inch flat profiles

The defining flat slat width creates a crisp, modern appearance across the fence panel.

Minimalist design

Straight lines and repeated narrow profiles complement modern homes, concrete, stucco, stone, and other clean exterior finishes.

Durable aluminum

Aluminum provides long-term exterior performance without the rust behavior associated with unprotected ferrous metals.

Rust & corrosion resistance

The aluminum system is well suited to outdoor fence applications and changing weather conditions.

Powder-coated finish

The factory-applied exterior finish protects the aluminum surface and provides long-term color and appearance.

Easy handling

Aluminum keeps the system manageable during site assembly compared with heavier material alternatives.

Low routine upkeep

No recurring painting or staining cycle is required. Routine cleaning is the primary appearance-maintenance task.

1.5-inch flat-profile design

The visual advantage comes from proportion and repetition, not decorative complexity.

A 1.5-inch flat face produces a narrow, consistent architectural line. Repeated across a 6×6 fence section, the profile creates a refined rhythm that feels cleaner and more deliberate than bulky commodity fence infill.

Spacing and privacy: final slat spacing, opening size, and privacy level depend on the configured kit and project layout. Do not assume a universal gap or privacy percentage unless it is specified for the order.

Conceptual 1.5″ flat-profile scale

What’s included

A site-assembled 6×6 fence kit built around the Max Rail™ 1.5 flat-profile system.

The product provides the flat-profile fence components required for the configured section. Exact post, mounting, and accessory requirements depend on the full fence layout and installation condition.

Ordering note: confirm posts, bases, anchors, transitions, corners, gates, and other project-specific installation accessories before finalizing a multi-panel fence run.

Max Rail™ 1.5 flat-profile aluminum slats

The primary fence infill profiles that create the narrow, straight architectural line.

Matching frame or rail components

Fence-section components selected for the configured 6×6 Max Rail™ assembly.

Required internal fence-section parts

System components used to organize, align, and retain the flat-profile fence assembly.

Standard assembly hardware where applicable

Fastening components supplied with the selected kit configuration for efficient site assembly.

Exterior performance

Modern appearance is only useful if the fence can stay outside and keep looking intentional.

The Max Rail™ 1.5 system is designed around aluminum, powder-coated exterior protection, manageable installation, and low recurring maintenance.

Outdoor-ready aluminum

Aluminum is naturally suited to exterior environments and does not develop iron-oxide rust.

Powder-coated surface

The exterior finish protects the metal surface and provides a consistent factory-finished appearance.

Weather resistance

The system is designed for residential and commercial outdoor fence use across changing conditions.

Low maintenance

No painting, staining, or special wood-style treatment cycle is required.

Recommended applications

A clean flat-profile fence for homes, landscape design, remodels, and commercial exteriors.

The narrow Max Rail™ profile works especially well where the fence needs to feel architectural rather than ornamental.

Residential

Perimeter fencing

Create a straight, contemporary fence line around modern and renovated homes.

Front & side yard

Property separations

Use the flat-profile system for clean front-yard, side-yard, and boundary sections.

Landscape

Garden enclosures

The narrow aluminum profile pairs well with concrete, stone, planting, and minimalist landscape design.

Commercial

Exterior screening

A modern aluminum direction for office, multifamily, hospitality, and light-commercial environments.

Remodel

Wood-fence replacement

Use aluminum where the project needs a cleaner long-term alternative to recurring wood maintenance.

Coordinated design

Fence + gate layouts

Carry the same Max Rail™ flat-profile language into compatible gate and fence combinations.

Max Rail™ 1.5 planning advantages

A strong choice when the project needs a refined profile, clean repetition, and low recurring maintenance.

The system is less about visual bulk and more about consistent architectural lines across the property.

Planning factor	Max Rail™ 1.5 flat profile	Traditional wood fence direction
Visual language	Narrow, straight, repeated aluminum profiles for a modern architectural look.	Board-based appearance that can read warmer but usually requires more finish upkeep.
Exterior behavior	Aluminum does not rot and does not develop iron-oxide rust.	Wood can absorb moisture, check, warp, or decay depending on species and maintenance.
Finish care	Powder-coated surface with routine cleaning as the primary appearance maintenance.	May require recurring stain, sealer, paint, or board replacement.
Installation handling	Aluminum components are manageable for site assembly and coordinated kit installation.	Varies by lumber size, moisture content, and framing method.
Design coordination	Can be coordinated with compatible modern aluminum gate and exterior-system layouts.	Often requires separate fabrication details to match metal gates or other finishes.

Installation planning

The clean flat-profile look depends on straight supports, consistent spacing, and careful alignment.

The kit is designed for efficient assembly, but the final result still depends on accurate fence layout, correct support conditions, and a controlled installation sequence.

Before installation: confirm the full fence run, support locations, finished height, grade changes, gates, mounting or footing requirements, and the exact kit configuration supplied for the project.

Lay out the fence run

Mark panel locations, corners, ends, support positions, grade changes, and adjoining gate conditions.

Install the approved supports

Set or mount the supports plumb using the foundation, base, or anchoring condition required for the site.

Establish the 6×6 section frame

Build or position the supporting fence-section components square and level before installing the flat profiles.

Install the 1.5-inch profiles

Place the Max Rail™ slats in sequence while maintaining the spacing and orientation specified for the configured kit.

Secure the section hardware

Complete the applicable connections and verify that each component remains aligned and properly secured.

Inspect the finished fence line

Confirm plumb, top-line consistency, profile spacing, fasteners, and transitions before completing the installation.

System specifications

The core details that define the Max Rail™ 1.5 Flat Profile 6×6 fence kit.

The product is a site-assembled aluminum fence kit centered on 1.5-inch flat profiles, a nominal 6×6 section, a powder-coated exterior finish, and low-maintenance outdoor use.

Specification boundary: do not assume a universal post size, wall thickness, slat gap, privacy percentage, footing depth, wind-load rating, or hardware quantity unless it is confirmed for the actual order.

Product: Alu Max Rail™ 1.5 Flat Profile 6′ × 6′ Kit (Fence)
Nominal panel size: 6 ft × 6 ft
Profile style: 1.5″ flat aluminum profile
System type: Site-assembled aluminum fence kit
Material: Aluminum
Finish: Exterior powder-coated finish
Exterior behavior: Rust-resistant and corrosion-resistant aluminum direction
Design style: Modern / contemporary / minimalist
Maintenance: Low maintenance; no recurring painting or staining cycle
Primary users: Contractors, installers, builders, designers, and experienced DIY users
Applications: Residential, commercial, perimeter, landscape, remodel, and coordinated fence-and-gate projects

Aluglobus video

See more factory-direct aluminum system and fabrication context.

Explore additional Aluglobus aluminum products, manufacturing, and project-system details.

Frequently asked questions

Plan the profile, outdoor use, installation, maintenance, and full fence layout before ordering.

The questions cover the four core product topics plus kit contents, posts, residential and commercial use, material choice, and coordination with gates or custom layouts.

What is the benefit of the flat profile design?

The 1.5-inch flat profile creates a sleek, modern look that complements contemporary homes, commercial buildings, and outdoor spaces.

Is this fence suitable for outdoor environments?

Yes. The system uses rust-resistant aluminum with an exterior powder-coated finish designed for outdoor use. Routine cleaning is recommended, especially in coastal or high-debris environments.

Is installation complicated?

The kit is designed for efficient site assembly and includes the fence components required for the configured section. Accurate layout, support installation, level alignment, and correct fastening are still important.

Does the fence require maintenance?

Very little routine maintenance is needed. The aluminum system does not require painting, staining, or special wood-style treatments. Periodic cleaning and inspection of fasteners and supports are recommended.

What size is the Max Rail 1.5 fence kit?

This product is a nominal 6-foot by 6-foot fence kit designed around 1.5-inch-wide flat aluminum profile slats.

What is included with the kit?

The kit includes Max Rail 1.5 flat-profile aluminum fence components for one 6×6 section, matching frame or rail components for the configured kit, required internal section parts, and standard assembly hardware where applicable.

Are posts included with every Max Rail 1.5 fence kit?

Post and mounting requirements depend on the project layout and support condition. Confirm the required posts, bases, anchors, and installation accessories for the actual fence run before ordering.

Can the system be used for residential and commercial projects?

Yes. The 6×6 flat-profile system is suitable for modern residential perimeter fencing, side-yard and front-yard sections, landscape enclosures, and commercial exterior screening.

How does aluminum compare with wood for this type of fence?

Aluminum does not rot or require the recurring painting, staining, and sealing cycle associated with many wood fences. It also provides a clean factory-finished appearance for modern exterior projects.

Can the Max Rail 1.5 system be coordinated with gates or custom layouts?

Yes. The same flat-profile design can be coordinated with project-specific fence runs and compatible gate layouts. Confirm dimensions, support conditions, and component requirements before fabrication or installation.

Factory-direct Max Rail™ fence systems

Use the 1.5-inch flat profile when the design calls for a cleaner, narrower architectural line.

Order the 6×6 Max Rail™ 1.5 fence kit, or send Aluglobus the complete layout when you need help coordinating sections, supports, gates, mounting conditions, or contractor supply.

Choose product options ↑Request project support

Aluglobus Aluminum Systems · Max Rail™ flat-profile fence systems · Factory-direct supply · Nationwide shipping

Trusted by investors, architects, homeowners and contractors

Watch Plug ✔

@watchplug

"I couldn't be happier with the fence. From the moment it went up, it completely transformed my backyard. The sleek design without visible posts gives it such a modern, high-end look. It's like having a piece of art around my home. I also love that it's fire-resistant, which gives me peace of mind living in this area. Definitely worth every penny!"

Mike

Home Owner

Daymond John

CEO, Entrepreneur & Investor

DW Design & Build ✔

@dannywangdesign

"We're honored to be recommended by Danny Wang Design, a premier contractor known for exceptional outdoor living spaces. In our latest collaboration, Danny created a stunning backyard and entrusted us with the gate and fence system. We're proud to be his trusted partner for quality and reliability."

Jim Monahan

★★★★★

"AluGlobus was extremely helpful with my order, answering all my questions and delivering everything to Texas in perfect condition. The products were well-packed in a solid wood crate, and excellent quality. I'm so glad I found them online. Highly recommended. I'll be buying from them again. Thanks to everyone who made it happen!"

David

Customer

Service Department

Mercedes Benz Engineer

Valley One Gates & Access

"We use Aluglobus 100% with every fence/gate job we have. As a contractor I can say they are working very hard and their product is the highest quality I can find and the best price. We're very happy working with them! Our experience working with them is always top notch."

22 July 2025

Shopping cart

Search