Standard 6×6 format
A practical fence-panel size for residential, commercial, and contractor-grade layouts.
Description
Product Description
AeroLouver™ · Curved Blade · Contractor Line · 6′ × 6′
Privacy and airflow in the same aluminum fence panel.
The AeroLouver™ Blade Curved Profile Contractor Line 6′ × 6′ Fence Kit uses curved aluminum louver blades to create a contemporary fence that screens direct views while still allowing air to move through the panel. It is designed for contractors, builders, homeowners, and exterior projects that need a more breathable alternative to a fully solid privacy fence.
Curved aluminum louvers · airflow + screening
Panel6 ft × 6 ft
ProfileCurved AeroLouver™ blade
FunctionAirflow + visual screening
MaterialAluminum
UseExterior fence system
Key features
A curved louver profile changes how the fence looks, breathes, and screens the property.
The 6×6 Contractor Line system combines modern blade geometry with exterior aluminum construction, powder-coated protection, and a component package organized for efficient assembly.
Curved louver blades
The profile creates depth and shadow while giving the fence a distinctive contemporary appearance.
Airflow through the panel
The louver layout leaves a controlled path for air instead of creating a completely solid wall-style surface.
Visual screening
Blade overlap helps reduce direct sight lines while preserving a more open feel than a solid privacy panel.
Exterior aluminum
Aluminum resists iron-oxide rust and is well suited to long-term outdoor fence applications.
Powder-coated finish
The exterior coating supports color retention and protects the aluminum surface from weather exposure.
Installer-friendly structure
The frame, blades, supports, hardware, and fasteners are organized for repeatable panel assembly.
Low maintenance
No recurring painting or staining cycle is required. Periodic cleaning and inspection are recommended.
How AeroLouver™ works
Curved blades interrupt direct views without shutting off ventilation.
The louvered geometry creates overlapping sight lines. From many normal viewing angles, the blades screen the area behind the fence, while the spaces between profiles allow air to continue moving through the panel.
Performance boundary: airflow through the panel should not be interpreted as a universal wind-load reduction. Structural wind performance depends on the complete fence assembly, blade spacing, supports, mounting, exposure, and project-specific engineering.
Conceptual airflow through curved louver profiles
What’s included
The Contractor Line kit supplies the blades, panel structure, supports, and assembly hardware.
The component package is designed around one 6×6 AeroLouver™ fence section so contractors and experienced DIY installers can build the panel from coordinated parts.
Project-specific items: support/post configuration, mounting method, footing or base requirements, field cuts, and final hardware quantities should be confirmed against the actual layout before installation.
01
Curved AeroLouver™ aluminum blade slats
The defining louver profiles that create the panel’s airflow and visual-screening behavior.
02
Frame components for a 6×6 panel
Structural aluminum components used to establish the panel perimeter and hold the blade system.
03
Mounting & support elements
Components used to stabilize the AeroLouver™ fence section within the installation.
04
Assembly hardware & fastening components
Hardware needed to assemble the supplied fence-panel components.
Performance
Exterior aluminum, ventilation, UV-resistant coating, and lower recurring upkeep.
AeroLouver™ is designed for outdoor fence use where the project needs a modern architectural screen without the fully closed behavior of a solid panel.
Rust & corrosion resistance
The aluminum structure does not develop iron-oxide rust and is suited to exterior conditions.
UV-resistant coating
The powder-coated finish is designed to help protect color and surface appearance during outdoor exposure.
Airflow
The curved blade layout permits ventilation through the panel while reducing direct sight lines.
Durable structure
The aluminum frame and blade system create a coordinated exterior fence assembly.
Low maintenance
Routine care focuses on cleaning and inspection rather than recurring painting or staining.
Recommended applications
AeroLouver™ works best where airflow and privacy both matter.
The curved-blade system is suited to residential, outdoor-living, pool-area, landscape, architectural, and contractor-grade fence applications.
Backyard enclosures
Create a modern boundary that provides visual screening without turning the yard into a fully closed perimeter.
Patios & exterior rooms
Define outdoor spaces while allowing more natural ventilation through the fence line.
Pool-perimeter concepts
Useful where airflow and screening are desired, subject to local requirements for openings, height, gates, and latches.
Architectural & landscape design
The curved profile adds depth, shadow, and a more distinctive visual rhythm than a standard flat slat.
Commercial exterior screening
A contractor-grade direction for offices, multifamily areas, hospitality spaces, and other exterior applications.
Ventilated privacy screens
Use blade overlap to reduce direct views while maintaining a path for air through the panel.
Curved louver vs solid privacy panel
Choose AeroLouver™ when the project needs screening without completely closing the fence surface.
A solid panel prioritizes visual closure. A curved louver panel balances screening with airflow and creates a different architectural expression.
| Planning factor | AeroLouver™ curved blade | Solid privacy panel |
|---|---|---|
| Airflow | Open paths between blades allow ventilation through the fence. | Minimal direct airflow through the panel surface. |
| Privacy | Blade overlap reduces direct sight lines while keeping the panel visually lighter. | Designed for stronger visual closure through the panel. |
| Appearance | Curved profiles create depth, shadow, and a louvered architectural rhythm. | Creates a flatter, more monolithic privacy surface. |
| Wind planning | Openings change airflow behavior, but project-specific wind engineering is still required where applicable. | Solid surfaces may create different wind demands and also require project-specific planning. |
| Maintenance | Low-maintenance powder-coated aluminum with periodic cleaning. | Depends on the material and finish of the solid panel system. |
Installation planning
Straight supports and consistent blade alignment are what make the finished louver line look intentional.
The system is designed for contractor-friendly assembly, but clean results still depend on accurate layout, correct support installation, consistent frame geometry, and secure blade fastening.
Before installation: confirm the fence run, support locations, finished height, grade, mounting or footing condition, pool requirements where applicable, and any project-specific structural criteria.
Lay out the fence run
Mark the 6×6 panel locations, support points, corners, grade changes, and adjoining gate or fence conditions.
Install the approved supports
Set or mount the supports plumb using the foundation or base condition required for the project.
Assemble the panel frame
Build the 6×6 frame square and level so the louver blades have a consistent installation reference.
Install the curved blades
Place the AeroLouver™ profiles in sequence, maintaining consistent orientation and spacing across the panel.
Secure the hardware
Install the supplied assembly and fastening components according to the system configuration.
Inspect alignment & airflow path
Verify the panel is plumb and level and that the blade line remains visually consistent from top to bottom.
System specifications
The core details that define this AeroLouver™ Contractor Line fence kit.
The product is a 6×6 curved-blade aluminum fence system designed to combine ventilation, visual screening, modern design, and exterior durability.
Specification boundary: no universal blade wall thickness, post size, footing depth, wind-load rating, acoustic rating, or mandatory blade spacing is stated for this product. Confirm those items from project documentation before fabrication or installation.
- Product
- AeroLouver™ Blade Curved Profile Contractor Line 6′ × 6′ Fence Kit
- Panel size
- 6 ft × 6 ft
- Profile style
- Curved aluminum louver blade
- Primary function
- Airflow with partial visual screening
- Material
- Aluminum
- Finish
- Exterior powder-coated finish
- Exterior behavior
- Rust-resistant, corrosion-resistant, and UV-resistant finish direction
- Included
- Curved blades, frame components, mounting/support elements, assembly hardware, and fasteners
- Installation
- Contractor-focused and suitable for experienced DIY assembly
- Maintenance
- Low maintenance; periodic cleaning and inspection recommended
- Applications
- Residential, backyard, patio, pool-area, architectural, landscape, and commercial fence projects
Aluglobus video
See more factory-direct aluminum system and fabrication context.
Explore additional Aluglobus aluminum products, manufacturing, and system details.
Frequently asked questions
Plan the curved-blade design, airflow, installation, maintenance, and project conditions before ordering.
These answers cover the AeroLouver™ profile, exterior use, airflow, installation, maintenance, kit contents, pool-area planning, and wind-performance boundaries.
What makes the AeroLouver™ design unique?
The curved blade profile creates a modern architectural look while allowing air to pass through the fence and still providing partial visual screening.
Is this fence suitable for outdoor use?
Yes. The system uses aluminum with an exterior powder-coated finish and is designed for outdoor fence applications. Routine cleaning is recommended, especially in coastal or high-debris environments.
Does the design allow airflow?
Yes. The louvered blade structure is specifically designed to permit ventilation through the fence while maintaining a level of privacy.
How difficult is the installation process?
The kit is designed for contractors and experienced DIY users. It includes the curved blades, frame components, support elements, hardware, and fasteners needed for assembly, but accurate layout, support installation, and final alignment are still important.
Does this fence require maintenance?
Maintenance is low. The aluminum and powder-coated finish do not require the recurring painting or staining cycle associated with many wood fences. Periodic cleaning and inspection of fasteners and supports are recommended.
What size is the AeroLouver™ Contractor Line fence kit?
The kit is designed as a standard 6-foot by 6-foot fence section for residential, commercial, and contractor-grade applications.
What is included with the kit?
The kit includes curved AeroLouver™ aluminum blade slats, frame components for one 6×6 panel, mounting and support elements, and assembly hardware and fastening components.
Does the curved blade design reduce wind load?
The openings between curved blades allow air to pass through the fence instead of creating a completely solid surface. However, no specific wind-load reduction or structural rating should be assumed unless project-specific engineering or testing is provided.
Can this fence be used around a pool?
It can be considered for pool-area applications where airflow and visual screening are desired, but the complete fence, blade openings, finished height, gates, latches, supports, and other details must satisfy local pool-safety requirements.
Is this system intended only for contractors?
No. It is positioned as a Contractor Line product because it is organized for efficient professional installation, but experienced DIY users can also assemble the system when they are comfortable with fence layout, support installation, fastening, and alignment.
Factory-direct AeroLouver™ Contractor Line
Use curved louvers when the fence needs to screen the view and still breathe.
Order the 6×6 AeroLouver™ Contractor Line kit, or send Aluglobus the complete fence layout when you need help coordinating quantities, supports, mounting conditions, adjoining gates, or contractor supply.
