Modern ALU40 Black Horizontal Double Swing Gate & Matching Fence Panel Supply in San Diego, CA

The side entrance of this San Diego home sits right under the roofline, between the stucco wall and a planted slope, where a concrete walkway leads from the front of the property to the backyard. It is the route for bins, tools, deliveries and everyday foot traffic, so the opening needed to be wide and easy to use. It also sits in plain view of the street and the neighbors, which made privacy just as important as access. The homeowner wanted the side yard to look like part of the architecture rather than an afterthought. The house is crisp and modern: white stucco, a dark fascia, black window frames and black exterior fixtures. A dated or mismatched gate would have broken that look, and a material that warps, fades or needs repainting would not hold up to San Diego sun and coastal air. The brief was simple. Close off the side yard with a gate wide enough for real use, give it the same horizontal language as the rest of the fence line, keep the color consistent with the home's black details, and choose a system that will stay straight and low-maintenance for years. Aluglobus Aluminum Systems supplied the complete gate and panel package for the opening.

ALU40 horizontal slat system: The gate and the fixed panel are both built from the ALU40 aluminum slat profile, the same system used on the Aluglobus Miami fence and gate project. The slats run horizontally across each leaf with tight, even gaps, so the street sees a solid dark band with thin lines of light instead of an open view into the side yard. Because the slats line up from leaf to leaf, the gate reads as one continuous surface when it is closed. Double swing layout: Instead of one oversized leaf, the opening is split into two side-by-side leaves of similar width, each hung on its own post. Each leaf carries half the weight and needs half the swing space of a single wide gate, which matters in a side yard bordered by a wall on one side and a slope on the other. For everyday walking, one leaf does the work; when a wheelbarrow, a large delivery or outdoor furniture needs to come through, both leaves open for the full width. Matching fixed fence panel: Next to the gate, a fixed ALU40 panel in the same black finish continues the slat line to the edge of the walkway. The panel and the gate share the same height, slat orientation and spacing, so the whole run looks like one designed element rather than a gate added to an existing fence. Latch and Basic Cane Bolt: A double gate needs two kinds of hardware. The latch is mounted at the top of the meeting stiles where the two leaves close against each other; on this project it is a keyed latch, so the side yard can be locked. The Basic Cane Bolt is mounted on the inactive leaf and drops into a socket in the ground. With the cane bolt down, that leaf stays fixed and gives the latch a solid point to close against. Lift the cane bolt and the second leaf swings open as well. Hinges and posts: Each leaf hangs from black bolt-on hinges on square black aluminum posts, one post against the house wall and one beside the fixed panel, so the hardware disappears into the finish. Black powder-coated finish: Black is a custom finish on the ALU40 system. Every component, from slats and frame to posts and hardware, is finished in black through Aluglobus's 7-stage powder coat process, which gives an even, durable coating that matches the home's window frames, fascia and fixtures. Factory-direct supply: Aluglobus manufactures and supplies its aluminum gate and fence systems factory-direct. For this project Aluglobus supplied the gate, the fixed panel and the listed hardware; the photos show the system after installation.

The side entrance now looks like it was designed with the house. From the street, the black horizontal slats line up with the dark roof edge and window frames, and the gate and fence panel read as one continuous screen across the opening. The narrow gaps keep the bins and storage behind the gate out of view while still letting air and some light through, so the side yard does not feel closed in. Day to day, the double swing layout makes the opening easy to live with. One leaf handles normal foot traffic, and both leaves open together when the full width is needed. The keyed latch secures the side yard, and the Basic Cane Bolt keeps the inactive leaf firmly in place, so the gate closes cleanly and stays square. Because the system is aluminum with a powder-coated finish, there is no wood to rot, split or warp and no steel to rust. A rinse with a hose and an occasional check of the hinges, latch and cane bolt is the only routine care it needs, which suits a home where the side yard sees constant use.