Step 1The project This single-story Arleta home has a long street frontage, a wide concrete driveway and a side boundary that runs along the sidewalk. The project called for one continuous privacy line across the whole front of the property that would still open the full width of the driveway for cars and give the family an easy way in on foot. It also had to stay sharp with very little upkeep, because a long run of fence is a lot of surface to repaint or reseal.Aluglobus Aluminum Systems supplied the fence and both gates, built in the Aluglobus factory, and an authorized Aluglobus installation partner installed them. Arleta sits in the northeast San Fernando Valley as part of the City of Los Angeles, where long, hot, sunny summers are hard on wood fences.
Step 2The design Full-frontage horizontal slat fenceWide sliding driveway gateWalk-through gate with keypad lockMatching gates and fenceAluglobus brandingBlack powder-coated finish See every feature ↓
Step 3The result The Arleta home now has a finished, modern frontage. From the street, the black horizontal slats form one continuous privacy line across the property, interrupted only by the slim outlines of the sliding gate and the walk-through gate. When the sliding gate opens, cars get the full width of the driveway, and on foot the family simply enters a code at the keypad. Because the fence and gates are powder-coated aluminum instead of wood, the long run will not need painting or sealing to keep looking this way.
Why aluminum works in the San Fernando Valley Arleta and the rest of the Valley see long, hot, sunny summers. Wood fences can dry out, split, warp and need regular sealing, and steel can rust wherever its coating is scratched. Aluminum does not rot or warp, it does not rust the way steel does, and a quality powder coat helps the finish hold up to strong sun with very little upkeep.
Sliding or swing driveway gate A sliding gate moves along the fence line, so it needs no swing space across the driveway or the sidewalk and works well on wide openings. It does need a clear stretch of fence line beside the opening to slide into. A swing gate needs room in front of the opening for each leaf to open, which suits flat driveways with plenty of space.
Adding a walk-through gate A separate walk-through gate means nobody has to open the big driveway gate just to get the mail or let a guest in. Building it in the same slat profile and finish keeps the frontage looking like one design.
Keypad lock or keyed lock A keyed lock is simple, but the key has to be on you. A keypad lock lets the household get in with a code, and codes can be shared or changed when needed.
Slat spacing and privacy Tighter gaps between horizontal slats feel more private, while wider gaps feel more open and let more light and air through.
How to plan a fence and sliding gate Measure the full length of the frontage, the clear driveway opening, the finished height you want and the space beside the opening where the sliding gate will sit when it is open, and note slopes, meters or anything else in the way. Photos of the frontage help the Aluglobus team confirm the right layout and hardware.
Local codes and HOA rules vary Requirements for front-yard fence and gate height and placement depend on the property. Arleta is part of the City of Los Angeles, so check with the city and your HOA before ordering.
Planning a similar fence and sliding driveway gate in the San Fernando Valley? Request a manufacturer-direct quote at aluglobusfence.com/online-quote/, call (888) 876-3006 or message WhatsApp 1 (424) 522-2143. You can also see Aluglobus fence and gate systems in person at the North Hills distribution center and showroom, 16721 Roscoe Blvd, North Hills, CA 91343, a short drive from Arleta. Start your project