b7d2d606 4407 468a a404 b8763d62aa08 | DIY PAD GATE Alu50 woodgrain Universal DIY 4' x 6' Gate Kit | Aluglobusfence.com

Material6063-T6 aluminum

FinishAAMA 2604 powder coat

Kit size6′ W × 6.3′ H

UseResidential and light commercial privacy fencing

Aluminum systems

Aluminum Fence Kit Alu50 T&G 6' x 6.3'

6' x 6.3' aluminum privacy fence kit built with interlocking ALU50 tongue-and-groove profiles for a seamless, gap-free surface. A modern horizontal fence that needs no painting, staining or sealing.

6063-T6 aluminum
AAMA 2604 powder coat
6′ W × 6.3′ H

$844.12

Coming soon · please confirm availability before ordering.

Coming soon — please confirm availability with us before ordering.

Add to cart

Buy Now

Request a project quote

Factory direct from Aluglobus Aluminum Systems
Nationwide shipping across the U.S.
Project support for homeowners and trade pros

Material6063-T6 aluminum

FinishAAMA 2604 powder coat

Kit size6′ W × 6.3′ H

UseResidential and light commercial privacy fencing

4.9 ★100+ Google reviews

1,000+Active contractors nationwide

USA-made6063-T6 aluminum

No weldingDIY assembly

Get the Highlights

Interlocking T&G slats. Full privacy, no gaps.

White ALU60 T&G fence with black top rail

Black, white, bronze or woodgrain.

A solid, architectural face from end to end.

6063-T6 aluminum. It can't rust or rot.

AAMA 2604 powder coat over a 7-stage pretreatment.

Steps with your grade, section by section.

Gap-free privacy

Each ALU50 tongue-and-groove profile engages the next, creating a continuous privacy surface without intentional slat gaps.

Close-up of a white T&G fence with black top rail

Strength across the panel

Tongue-and-groove engagement adds structural continuity across adjoining profiles and keeps the panel aligned.

Built to stay new outside

USA-made 6063-T6 aluminum doesn't form iron rust, rot, warp or attract termites, finished with an AAMA 2604 architectural powder coat over a 7-stage pretreatment.

Simple, repeatable assembly

The interlocking format simplifies panel assembly, while accurate supports control the final fence line.

Never rustsNo weldingMade in the USAAAMA 2604 finishShips nationwideNon-combustibleFactory directNever rustsNo weldingMade in the USAAAMA 2604 finishShips nationwideNon-combustibleFactory direct

What's included

The ALU50 T&G 6′ × 6.3′ privacy kit.

**ALU50/60 T&G fence on the 2-way post system**Assembly drawing with views and dimensions. Tap to enlarge.

Panel format6′ × 6.3′

System typeHorizontal tongue-and-groove aluminum privacy fence

PrivacyGap-free interlocking surface

Material6063-T6 aluminum

FinishAAMA 2604 architectural powder coating

CombustibilityNon-combustible aluminum material

MaintenanceNo painting, staining, or sealing cycle; periodic cleaning recommended

InstallationProfessional or experienced DIY installation

Project-specific engineering: post dimensions, wall thickness, footing depth, wind capacity and connection loads are not published as universal values for this SKU and should be confirmed for the actual project.

ALU50/60 T&G fence on the square post system drawing ↗

ALU50/60 T&G slat profile drawing ↗

horizontal aluminum fence kit

A horizontal aluminum fence kit for modern privacy

This horizontal aluminum fence kit gives a modern slat fence with even gaps or full privacy, depending on the profile. Posts, slats and accessories are made to work as one system, in 6063-T6 aluminum with an AAMA 2604 powder coat, so the fence will not rust, rot or need repainting. Everything ships factory direct from Southern California.

How it is built

Two post systems. See every part.

Official Aluglobus exploded drawings. Both systems take the same ALU20, ALU40 and ALU50/60 slats in the same finishes as our gates.

Fence system

ALU INTEGRAL™

Two-Way Integrated Post System

Slats slide straight into the posts and stack on aluminum spacers. No exposed rails, quick to install. This is the system in our boxed 8 ft section kits.

2.75 × 2.75 in 2-way posts with press caps
L-brackets and bottom spacers in every post kit
Aluminum spacers set the slat gap
End post kit with a cover strip where a run stops

Fence system

ALU FRAME™

C-Channel Mounting System

Square aluminum posts with a channel and cover on each side. The slats sit in the channels for clean lines with every screw hidden.

Square posts with caps
Channel and cover on each post side
Stainless steel screws throughout
Used in the wood grain ALU40 Contractor Line kit

The gates that match your fence

Exploded drawing of the Aluglobus DIY Universal pedestrian gate

Matching gates

Same slats. Same finish. A real gate frame.

Every Aluglobus gate is a complete frame with top and bottom members, filled with the same ALU20, ALU40 or ALU50/60 slats as your fence. Universal DIY kits for side yards, Heavy-Duty swing and sliding gates for driveways.

See aluminum gates

Applications

Where this fence fits.

Property-line fencingUse the gap-free T&G surface where direct visual screening is more important than airflow through the panel.

Backyard enclosuresCreate a continuous modern boundary around backyards and private outdoor living spaces.

Garden and patio boundariesThe horizontal aluminum surface provides a clean background for landscaping, patios and exterior architecture.

Pool-perimeter layoutsThe fence can be considered around pool areas when the complete barrier, posts, gates, hardware and openings satisfy local requirements.

Architectural privacyThe smooth horizontal line works naturally with contemporary residential exterior design.

Light-commercial screeningUseful for offices, multifamily areas and other low-rise exterior spaces that need visual screening.

Gallery

Installed ALU20, ALU40 and ALU50/60 fences.

Real Aluglobus fences on real projects. Tap any photo to open it full size.

White ALU60 T&G privacy fence with a black slat top on a retaining wall

White ALU60 T&G privacy fence with a black slat top below a hillside

White ALU60 T&G fence run on a concrete retaining wall

White ALU60 T&G privacy fence seen from the garden

White ALU60 T&G fence with black posts and slat top

Long white ALU60 T&G fence on a retaining wall

White ALU60 T&G fence stepping along a wall

White ALU60 T&G panels with a black slat top

Aluglobus vs other aluminum fences

Aluminum is the raw material. The system is what you buy.

Two fences can both say aluminum and perform nothing alike. Here is what changes from one system to the next.

Aluglobus ALU40 black aluminum fence along a side yard — Aluglobus: slats held in posts made for the profile.

Not an Aluglobus product. Field photo: peeling powder coat at an aluminum fence corner — Typical aluminum fence: check the posts, the coating and the connections.

Point by point

Tap any row for the details and the question to ask.

Aluglobus, published specTypical aluminum fence kitNot disclosed: ask the seller

01Post system

Posts made for the slats

Parts adapted on siteAsk: Are the posts made for these slats, or adapted on site?

Parts adapted on sitePosts made for the slats

AluglobusALU INTEGRAL™ two-way posts or ALU FRAME™ C-channel posts, made for the slats they hold.

Typical aluminum fence kitPosts, rails and slats often sourced separately and adapted on site.

Ask the sellerAre the posts made for these slats, or adapted on site?

02Alloy

6063-T6 only

Not statedAsk: Which alloy is it, in writing?

Not statedMixed metals6063-T6 only

Aluglobus6063-T6 extrusion, no mixed metals.

Typical aluminum fence kitOften unstated; mixed metal makes screws strip and profiles weaker.

Ask the sellerWhich alloy is it, in writing?

03Pretreatment

7 stages

1 stepAsk: How many pretreatment stages before the powder?

7 stages

Aluglobus7-stage architectural line.

Typical aluminum fence kitSingle degrease or buff, then a small oven.

Ask the sellerHow many pretreatment stages before the powder?

04Powder coating

Before assembly, 360°

After assemblyAsk: Is it coated before or after assembly?

After assemblyBefore assembly, 360°

AluglobusAAMA 2604 architectural finish, coated before assembly, 360° inside the channels.

Typical aluminum fence kitOften coated after assembly, so channels and seams can be missed.

Ask the sellerIs it coated before or after assembly?

05Repairs

Swap one profile

Replace the panelAsk: Can one damaged profile be replaced on its own?

Replace the panelSwap one profile

AluglobusBolt-together system: replace or recoat a single profile.

Typical aluminum fence kitWelded or riveted panels, often replaced whole.

Ask the sellerCan one damaged profile be replaced on its own?

06Sizes and colors

Any height, any color

Fixed sizes, few colorsAsk: Which heights and colors can be made to order?

Fixed sizes, few colorsAny height, any color

AluglobusCustom heights and runs, any powder-coat color.

Typical aluminum fence kitFixed kit sizes and a few stock colors.

Ask the sellerWhich heights and colors can be made to order?

07Who stands behind it

Factory direct

Reseller or import kitAsk: Who made the aluminum and the coating?

Reseller or import kitFactory direct

AluglobusFactory direct, with extrusion and coating shown openly.

Typical aluminum fence kitReseller or import kit; factory, coating stages and powder brand rarely disclosed.

Ask the sellerWho made the aluminum and the coating?

08Written warranty

25 years

Varies by sellerAsk: Can I see the warranty in writing?

25 years

Aluglobus25-year limited manufacturer warranty on covered aluminum materials.

Typical aluminum fence kitVaries by seller.

Ask the sellerCan I see the warranty in writing?

Comparison with typical market kits in general, not with any named brand. Ask any supplier for their alloy, pretreatment stages, powder brand and written warranty.

Compare in pictures

Infographic: full Aluglobus gate frame compared with an imported slat gate

Infographic: Aluglobus U.S. warranty support compared with an imported gate

Field photos show other products for illustration, not any named brand.

Aluminum vs composite

Want the wood look? Compare what is underneath.

Composite gives a wood-inspired board. Wood-look aluminum gives the same warm look on an architectural aluminum system.

Aluglobus ALU60 T&G wood grain aluminum fence in a side yard — Wood-look aluminum: a wood grain finish on 6063-T6 aluminum.

Not an Aluglobus product. Field photo: composite fence boards fading near the ground — Composite fence: boards fading near the ground.

Point by point

Tap any row for the details and the question to ask.

Aluglobus, published specComposite (wood + plastic)Not disclosed: ask the seller

01Base material

6063-T6 aluminum

Wood fibers and plasticAsk: What is the board made of?

Wood fibers and plastic6063-T6 aluminum

AluglobusExtruded 6063-T6 aluminum with a wood grain finish.

Composite (wood + plastic)Wood fibers and plastic.

Ask the sellerWhat is the board made of?

02Fire

Noncombustible base metal

Check the test dataAsk: Can I see the fire test data for this product?

Check the test dataNoncombustible base metal

AluglobusNoncombustible base metal, a strong fit for Zone 0 planning.

Composite (wood + plastic)Do not assume it is noncombustible; check the product test data.

Ask the sellerCan I see the fire test data for this product?

03Fence structure

Slats held in the posts

Separate frame or railsAsk: What holds the boards in place?

Separate frame or railsSlats held in the posts

AluglobusSlats are held in aluminum posts made for the profile.

Composite (wood + plastic)Boards rely on a separate frame, rails or reinforcement.

Ask the sellerWhat holds the boards in place?

04Heat and sun

No wood-fiber core

Boards can moveAsk: What spans and fastening are needed for heat movement?

Boards can moveNo wood-fiber core

AluglobusNo wood-fiber core in the slats.

Composite (wood + plastic)Boards can move with heat; spans and fastening matter.

Ask the sellerWhat spans and fastening are needed for heat movement?

05Matching gate and fence

Same profiles and finishes

Different material or frameAsk: Does the gate use the same material as the fence?

Different material or frameSame profiles and finishes

AluglobusSame profiles and finishes across gates, fences and cladding.

Composite (wood + plastic)Gates often need a different material or frame.

Ask the sellerDoes the gate use the same material as the fence?

06Maintenance

Low maintenance

Follow the board makerAsk: What care does the board maker require?

Follow the board makerLow maintenance

AluglobusLow maintenance.

Composite (wood + plastic)Clean and inspect per the board maker.

Ask the sellerWhat care does the board maker require?

Aluminum is a noncombustible base metal, but no complete fence or gate should be called fireproof. Coatings, hardware and the installed condition matter; check your local requirements.

Compare in pictures

Infographic: wood-look aluminum compared with a brown wood-plastic composite fence

Infographic: wood-look aluminum compared with a gray wood-plastic composite fence

Infographic: Aluglobus architectural powder coat finish compared with a composite gate

Infographic: 25-year limited aluminum warranty compared with a composite gate

Field photos show other products for illustration, not any named brand.

7-stage vs standard powder coating

Same color. Very different finish.

Standard powder coating cleans the aluminum and puts it in an oven. Architectural 7-stage coating runs it through a full pretreatment line first.

Aluglobus black aluminum fence with 7-stage powder coat on a garden wall — Aluglobus: pretreated in 7 stages and powder coated before assembly.

Not an Aluglobus product. Field photo: standard powder coat peeling off an aluminum fence — Standard coating: powder peeling off the aluminum.

Point by point

Tap any row for the details and the question to ask.

Aluglobus, published specStandard single-stageNot disclosed: ask the seller

01Pretreatment

7 stages

1 stepAsk: How many pretreatment stages before the powder?

7 stages

AluglobusRinse, degrease, acid wash, rinses, zirconium coating, DI and reverse-osmosis rinse.

Standard single-stageAn acid clean or degreaser, sometimes just buffing.

Ask the sellerHow many pretreatment stages before the powder?

02Cure oven

110 ft

A small single ovenAsk: How long is the cure oven?

110 ft

AluglobusPowder baked on at 400 degrees in a 110 linear foot oven.

Standard single-stageA small single oven.

Ask the sellerHow long is the cure oven?

03Dry-off oven

40 ft

Not listedAsk: Is there a dry-off oven before the powder?

110 ft

AluglobusA 40 ft oven at 400 degrees dries off every rinse.

Standard single-stageNot listed.

Ask the sellerIs there a dry-off oven before the powder?

04When it is coated

Before assembly, 360°

After assemblyAsk: Is it coated before or after assembly?

After assemblyBefore assembly, 360°

AluglobusBefore assembly, so every piece is coated 360° inside the channels.

Standard single-stageOften after assembly; hidden faces and seams can be missed.

Ask the sellerIs it coated before or after assembly?

05Inspection

LED check, missed pieces recoated

Not statedAsk: How are coating defects caught?

Not statedLED check, missed pieces recoated

AluglobusLED inspection; anything missed is pulled and recoated.

Standard single-stageAir and dust bubbles can pop and chip later.

Ask the sellerHow are coating defects caught?

06Big parts

Sized for long frames and beams

Limited by oven sizeAsk: Can the line fit long gate frames?

Limited by oven sizeSized for long frames and beams

AluglobusLine sized for long gate frames and patio beams.

Standard single-stageLimited by oven size.

Ask the sellerCan the line fit long gate frames?

07Finish standard

AAMA 2604 architectural

Not architecturalAsk: Which finish standard is it coated to?

Not architecturalAAMA 2604 architectural

AluglobusAAMA 2604 architectural finish.

Standard single-stageNot an architectural process, so no architectural finish warranty.

Ask the sellerWhich finish standard is it coated to?

See each of the 7 stages →

Compare in pictures

Infographic: Aluglobus 7-stage finish compared with an imported gate finish

Field photos show other products for illustration, not any named brand.

Inside the factory

See where your fence is actually made.

Inside the Aluglobus aluminum extrusion line, where the posts and slats for your fence are made. From there every piece goes through the 7-stage pretreatment line, the powder booths and the 110 ft cure oven. Factory direct, no middlemen.

6063-T6 USExtruded architectural aluminum

7 stagesArchitectural pretreatment before powder

110 ftCure oven, long enough for gate and patio beams

NationwideFactory direct shipping to your site

Manufacturing warranty

No Factory Proof.
No Manufacturing Transparency.
No Warranty You Can Verify.

Know who manufactures your aluminum and who stands behind it.

U.S. company
U.S. warranty support

Powder coating warranty

No Coating Brand.
No Preparation Proof.
No Finish Warranty You Can Verify.

Know the coating manufacturer, the preparation process, and who's responsible for the finish.

Made in our shop, not resold

Cutting, punching, milling, bending and finishing under one roof.

Aluglobus fabricates its own aluminum systems and ships them factory direct to homeowners and contractors across the U.S. That keeps engineering, quality control and pricing in one place.

Project-specific fabrication, not fixed kit sizes
Punching, laser cutting, milling and bending in the shop
7-stage powder coating with a 110 ft oven for long profiles
Packed and shipped to your job site or warehouse

Inside our U.S. machine shop

Engineered first. Manufactured in-house. Built with precision.

At Aluglobus, we don't just supply aluminum systems. We engineer and manufacture the components that make them work.

Inside our U.S. machine shop we make custom aluminum parts with CNC aluminum machining, precision laser cutting and aluminum sheet metal fabrication: engineered brackets and connection plates, specialized mounting hardware and custom components for our fences, gates and architectural aluminum systems. Making them ourselves gives us more control over quality, fit and customization.

U.S.-manufactured componentsEngineered aluminum brackets, connection plates and aluminum fence hardware, made in our own machine shop.

Precision machining of an aluminum bracket and connection plate in the Aluglobus U.S. machine shop — **Precision machining**Custom aluminum components machined for accurate system connections.

Precision laser cutting of aluminum sheet into mounting plates and brackets in the Aluglobus machine shop — **Laser-cut aluminum parts**Precision-cut brackets, mounting plates and fabricated components.

Laser cutter control station and live cutting camera in the Aluglobus U.S. machine shop — **Engineering and design**Technical design comes before precision manufacturing.

Laser-cut aluminum connection plates in the Aluglobus machine shop — **Custom components**Purpose-built aluminum brackets, connectors and mounting plates.

U.S.-based manufacturing facility

Our American machine shop manufactures aluminum components and custom parts for Aluglobus systems.

Engineered before manufacturing

Components start with technical design and engineering before they move into precision production.

Precision CNC machining

Custom aluminum parts are CNC-machined for consistent dimensions, accurate connections and dependable fit.

In-house laser cutting

Precision-cut aluminum sheets, mounting plates, brackets and specialized components.

Custom aluminum fabrication

Specialized brackets, connectors, mounting solutions and custom-designed parts made to your project requirements.

Quality control through direct manufacturing

More oversight of production for consistent components, accurate tolerances and reliable system compatibility.

Built for contractors and custom projects

Our fabrication supports aluminum fencing, gates, architectural applications and specialized installations.

A manufacturer behind the system

We show the process. So you know who stands behind the product.

Not just a supplier. From engineering drawings to finished aluminum components, we make the parts that make the system work.

Plan your fence

Real fences. Real homes.

Aluglobus fences installed by customers and contractors. Swipe to see more.

Driveway run

Hillside

White with black posts

From the garden

Long black run

New build

Woodgrain option

Why Aluglobus

The best choice for your property line.

Easy to installPosts, slats and brackets that go together with standard tools. No welding.

Ships nationwideFactory-direct fence systems shipped across the U.S.

Real expert supportHomeowner and contractor support from the people who make it.

Trusted by thousands4.9 stars on Google and 1,000+ active contractors nationwide.

Architectural qualityUSA 6063-T6 aluminum and an AAMA 2604 powder-coat finish.

Built for any weatherNo rust, no rot, non-combustible.

Reviews

Real fences. Real reviews.

Homeowners and contractors on Aluglobus fences and gates.

All reviews

DAYMOND JOHNCEO, Entrepreneur and Investor

MIKEHomeowner

DAVIDCustomer

4.9★★★★★Google rating, 100+ reviews

Installed Aluglobus fences

Read all reviews

Watch Plug

@watchplug

“I couldn’t be happier with the fence. From the moment it went up, it completely transformed my backyard. The sleek design without visible posts gives it such a modern, high-end look. I also love that it’s fire-resistant.”

Aluglobus customer

Valley One Gates & Access

★★★★★

“We use Aluglobus 100% with every fence/gate job we have. As a contractor I can say they are working very hard and their product is highest quality I can find and the best price.”

Contractor

Zohar Schneider

31 Jul 2025

“This company offers exceptional quality at unbeatable prices and provides top-notch customer service. I’ve been using them regularly for my projects in Los Angeles, and I love their aluminum gates and fences.”

Google review

Jim Monahan

★★★★★

“AluGlobus was extremely helpful with my order, answering all my questions and delivering everything to Texas in perfect condition. The products were well-packed in a solid wood crate, and excellent quality.”

Shipped to Texas

Aren G

23 Oct 2025

“We just want to thanks Alberto from here, he’s been helping us through our projects, he’s very knowledgeable and very professional and he did answer to our all questions.”

Google review

Daymond John

CEO, entrepreneur and investor

“High standards, clean work, and a premium finish, exactly what you want when you’re upgrading a property.”

Narrow it down

How the ALU50 T&G fence compares.

	ALU50 T&G fence	Wood fence	Vinyl fence	Steel fence
Rust	✓ Never	—	—	✕ Rusts
Rot, warp, termites	✓ None	✕ Yes	✓ None	✓ None
Repainting or staining	✓ Not needed	✕ Regularly	✓ Not needed	✕ Touch-ups
Non-combustible	✓ Yes	✕ No	✕ No	✓ Yes
Look	Modern horizontal	Natural, then grey	Plastic sheen	Industrial
Privacy	Full privacy, no gaps	Varies	Varies	Varies

See it built

Perfect aluminum fence installation technique

Why contractors switch to factory-direct aluminum fences

More from the Aluglobus channel

Slats, finishes and fence buying tips.

Don't settle for rust: choose aluminum fencing

Before you buy an aluminum fence, watch this

How it works

Plan the run before you order.

Lay out the fence lineMark the complete run, support locations, corners, ends, grade changes and any gate conditions.
Install the approved supportsSet posts or structural supports plumb using the mounting and foundation design required for the site.
Establish the first profileSet the starting ALU50 profile level and aligned so the remaining T&G stack follows a controlled reference.
Interlock the ALU50 profilesEngage each tongue-and-groove profile fully as the panel is assembled to maintain the gap-free surface.
Secure and inspect the panelComplete the specified connections, then verify plumb, top line, interlock engagement and overall fence alignment.

FAQ

Questions about this fence kit.

What is a tongue-and-groove (T&G) fence system?

A tongue-and-groove fence uses interlocking aluminum panels that fit tightly together. The adjoining profiles engage along their edges to create a continuous, gap-free privacy surface.

Does this fence provide complete privacy?

The ALU50 T&G design is intended as a full-privacy fence system. Unlike spaced slat fences, the interlocking profiles eliminate the intentional horizontal gaps between boards.

Is the fence resistant to weather and rust?

Yes. The system uses corrosion-resistant aluminum with an exterior powder-coated finish designed for UV and weather exposure. Routine cleaning is still recommended, especially in coastal or high-debris environments.

Is this fence suitable for DIY installation?

The interlocking format is designed to simplify panel assembly, so experienced DIY installers can achieve good results. Accurate support layout, plumb alignment, approved mounting, and standard fence-installation tools are still important.

Does the fence require maintenance over time?

Maintenance is low. The aluminum construction does not require the painting, staining, or sealing cycle associated with natural wood. Periodic cleaning and inspection of supports and fasteners are recommended.

What size is this ALU50 T&G fence kit?

The product is listed in a 6-foot by 6.3-foot panel format. Confirm the finished site dimensions, support layout, and any required trimming before installation.

What material and finish are used?

The ALU50 family is presented with 6063-T6 aluminum and AAMA-2604 architectural powder-coat performance for durable exterior use.

Is the aluminum non-combustible?

The product presentation identifies the aluminum system as non-combustible. Complete project fire compliance depends on the full assembly, location, and applicable local requirements.

Can this fence be used around a pool?

It can be considered for pool-area fencing, but the complete barrier must satisfy local requirements for height, openings, climbability, gates, latches, and other safety provisions.

Does the gap-free panel have a tested sound or wind rating?

The continuous interlocked surface can block direct sight lines and direct airflow better than an intentionally spaced slat fence, but no specific acoustic or wind-load rating should be assumed unless it is provided for the engineered project.

Still not sure? Call (888) 876-3006 or send us your project.

Description

A 6′ × 6.3′ aluminum fence kit built with ALU50 tongue-and-groove profiles that interlock to create a seamless, gap-free privacy fence with clean architectural lines.

Specifications

Panel format	6′ × 6.3′
Profile	ALU50 T&G
Privacy	Gap-free
Material	6063-T6 aluminum
Finish	AAMA 2604 powder coat

Installation

Set posts or supports plumb using the mounting and foundation design your site needs, engage each profile fully as the panel is assembled, then secure and inspect the panel.

Finish care

Rinse now and then, especially near the coast. Appearance over time depends on climate, cleaning and wear.

Fire safety

Aluminum is non-combustible and does not burn under normal fire conditions. Smoke developed: 0.

FAQ

Buyer questions about the horizontal aluminum fence kit.

Still not sure? Call (888) 876-3006 or send us your project.

How long does an aluminum fence last?

Aluminum does not rot, rust like steel or need staining, so a powder-coated aluminum fence lasts decades with occasional washing.

Is a horizontal aluminum fence good for privacy?

Yes. Tongue-and-groove (T&G) slats interlock for full privacy with no gaps; slatted profiles with a 3/8″ or 1/2″ gap give semi-privacy and let air through.

Can it be installed on concrete?

Yes. Posts can be surface mounted with base plates and wedge anchors, or set in concrete footings.

Aluminum vs wood, vinyl or composite fence?

Aluminum will not warp, rot or attract termites like wood, will not chalk like vinyl and weighs far less than composite, with a factory powder-coat finish.

Full product description: Aluminum Fence Kit Alu50 T&G 6′ x 6.3′

ALU50 T&G · 6′ × 6.3′ · Full Privacy

A gap-free aluminum fence built around an interlocking tongue-and-groove surface.

The ALU50 T&G 6′ × 6.3′ fence kit is designed for maximum visual privacy, structural continuity, and a clean modern exterior. Each horizontal aluminum profile interlocks with the next, eliminating the intentional gaps found in standard slat systems and creating one continuous privacy surface.

Gap-free T&G · 6063-T6 · AAMA-2604
Panel format6′ × 6.3′
SystemALU50 T&G
PrivacyGap-free / full privacy
Material6063-T6 aluminum
FinishAAMA-2604 direction

ALU50 system gallery

The complete visual sequence for profile structure, finish, alignment, aluminum construction, and installation.

The gallery highlights the ALU50 panel structure, tongue-and-groove interlock, exterior finish, alignment, aluminum construction, and installation context.

Additional system views

A second six-image sequence for finish, components, fabrication, and completed-fence context.

The second gallery provides additional views of ALU50 installation, components, fabrication, and completed aluminum-fence context.

Seamless privacy with modern design

Tongue-and-groove profiles remove the intentional gaps found in standard horizontal slat fencing.

The ALU50 T&G system is designed for people who want privacy and a clean modern horizontal line. Interlocking profiles create a smoother continuous surface that works with buildings, landscapes, backyards, and upscale outdoor spaces.

Noise and wind: the gap-free surface blocks direct openings through the fence, but no tested acoustic reduction or wind-load value should be assumed unless it is supplied for the engineered project.
Conceptual ALU50 T&G interlock

Engineered for strength & durability

Exterior aluminum performance without the maintenance cycle of painted or stained wood.

The ALU50 fence is positioned around corrosion resistance, UV stability, weather exposure, non-combustible aluminum, and a low-maintenance powder-coated surface.

Corrosion-resistant aluminum

Aluminum does not develop iron-oxide rust and is well suited to long-term exterior fence applications.

UV-stable finish direction

Architectural powder coating helps protect the surface from outdoor sun and weather exposure.

Weather-resistant system

The aluminum profiles and exterior coating are designed for outdoor use across residential and light-commercial projects.

Non-combustible material

The aluminum substrate does not ignite like wood or vinyl. Complete assembly compliance depends on local project requirements.

Low maintenance

No recurring painting, staining, or sealing cycle is required for the aluminum profiles.

Interlocking rigidity

Tongue-and-groove engagement creates a continuous panel surface and adds structural continuity across adjoining profiles.

Built for easier installation

The interlocking format simplifies panel assembly while accurate supports control the final fence line.

ALU50 T&G is suitable for contractors and experienced DIY users. The profiles interlock as the panel is assembled, reducing the need to visually set a separate gap between every board.

Planning first: confirm the support/post configuration, mounting method, finished elevation, grade, wind exposure, and local structural requirements from the actual order and project before installation.

Lay out the fence line

Mark the complete run, support locations, corners, ends, grade changes, and any gate conditions.

Install the approved supports

Set posts or structural supports plumb using the mounting and foundation design required for the site.

Establish the first profile

Set the starting ALU50 profile level and aligned so the remaining T&G stack follows a controlled reference.

Interlock the ALU50 profiles

Engage each tongue-and-groove profile fully as the panel is assembled to maintain the gap-free surface.

Secure & inspect the panel

Complete the specified connections, then verify plumb, top line, interlock engagement, and overall fence alignment.

Recommended applications

Full-privacy aluminum fencing for residential, landscape, pool-area, and light-commercial projects.

The seamless horizontal surface is especially useful where privacy is the priority and the project calls for a clean architectural appearance.

Privacy

Property-line fencing

Use the gap-free T&G surface where direct visual screening is more important than airflow through the panel.

Residential

Backyard enclosures

Create a continuous modern boundary around backyards and private outdoor living spaces.

Landscape

Garden & patio boundaries

The horizontal aluminum surface provides a clean background for landscaping, patios, and exterior architecture.

Pool area

Pool-perimeter layouts

The fence can be considered around pool areas when the complete barrier, posts, gates, hardware, and openings satisfy local requirements.

Modern home

Architectural privacy

The smooth horizontal line works naturally with contemporary residential exterior design.

Commercial

Light-commercial screening

Useful for offices, multifamily areas, and other low-rise exterior spaces that need visual screening.

Why choose ALU50 T&G?

Four core reasons the system differs from a standard spaced-slat fence.

ALU50 T&G is built around four core advantages: maximum privacy, interlocking continuity, modern aesthetics, and lower recurring maintenance.

Benefit	ALU50 T&G direction
Maximum privacy	No intentional gaps between interlocking ALU50 T&G profiles.
Stronger structure	The tongue-and-groove connection creates continuity and added rigidity across the panel surface.
Modern aesthetics	A clean horizontal surface with a seamless, architectural appearance.
Long-term savings	Lower recurring finish maintenance than traditional wood fencing because painting, staining, and sealing are not part of routine aluminum care.

Material & system specifications

The product specifications that matter for planning the ALU50 T&G fence.

The ALU50 T&G system combines a 6′ × 6.3′ format, gap-free interlocking privacy design, heavy-duty aluminum construction, exterior finish performance, and residential/light-commercial use.

Project-specific engineering: post dimensions, wall thickness, footing depth, wind capacity, and connection loads are not published as universal values for this SKU and should be confirmed for the actual installation.

Product: Aluminum Fence Kit ALU50 T&G 6′ × 6.3′
Panel format: 6′ × 6.3′
System type: Horizontal tongue-and-groove aluminum privacy fence
Privacy: Gap-free interlocking surface
Material direction: 6063-T6 aluminum
Finish direction: AAMA-2604 architectural powder coating
Weather behavior: Corrosion-resistant, weather-resistant, and UV-stable exterior direction
Combustibility: Non-combustible aluminum material
Maintenance: No painting, staining, or sealing cycle; periodic cleaning recommended
Applications: Residential and light-commercial privacy fencing
Installation: Professional or experienced DIY installation

Aluglobus video

Additional factory-direct aluminum system and fabrication context.

Explore additional Aluglobus aluminum-system and fabrication footage.

Frequently asked questions

Understand the T&G interlock, privacy, exterior performance, installation, and maintenance before ordering.

These answers cover sizing, material, privacy, exterior performance, installation, fire behavior, pool-area planning, and routine maintenance.

What is a tongue-and-groove (T&G) fence system?

A tongue-and-groove fence uses interlocking aluminum panels that fit tightly together. The adjoining profiles engage along their edges to create a continuous, gap-free privacy surface.

Does this fence provide complete privacy?

The ALU50 T&G design is intended as a full-privacy fence system. Unlike spaced slat fences, the interlocking profiles eliminate the intentional horizontal gaps between boards.

Is the fence resistant to weather and rust?

Is this fence suitable for DIY installation?

Does the fence require maintenance over time?

What size is this ALU50 T&G fence kit?

The product is listed in a 6-foot by 6.3-foot panel format. Confirm the finished site dimensions, support layout, and any required trimming before installation.

What material and finish are used?

The ALU50 family is presented with 6063-T6 aluminum and AAMA-2604 architectural powder-coat performance for durable exterior use.

Is the aluminum non-combustible?

The product presentation identifies the aluminum system as non-combustible. Complete project fire compliance depends on the full assembly, location, and applicable local requirements.

Can this fence be used around a pool?

It can be considered for pool-area fencing, but the complete barrier must satisfy local requirements for height, openings, climbability, gates, latches, and other safety provisions.

Does the gap-free panel have a tested sound or wind rating?

Factory-direct ALU50 T&G fencing

Choose the gap-free system when privacy is the priority.

Select the ALU50 T&G 6′ × 6.3′ product options above, or send Aluglobus the full fence layout when you need help coordinating quantities, supports, gates, mounting, and project-specific details.

Request project support
Aluglobus Aluminum Systems · ALU50 T&G privacy fence systems · Factory-direct supply · Nationwide shipping

Warranty

25-year limited manufacturer warranty on covered gate and fence aluminum materials.

Written terms and exclusions apply. Finish and hardware coverage differ; ask for the written terms with your quote.

Powder coating

Pretreated in 7 stages. Powder coated before assembly. Coated 360°.

AAMA 2604 architectural finish with AkzoNobel and TIGER powders, baked in a 110 ft cure oven.

Locations

Showrooms, wholesale and partners near you.

See our systems in person at an Aluglobus showroom, pick up from a wholesale location, or work with an authorized partner. Nationwide U.S. shipping from the factory everywhere else.

ShowroomSouthern California16721 Roscoe Blvd, North Hills, CAGet directions ↗ShowroomNorthern California4909 Auburn Blvd #1, Sacramento, CA 95841Get directions ↗

WholesaleBay AreaSan Jose, CA · address upon request

WholesaleSacramento12355 Quicksilver Dr, Rancho Cordova, CA 95742Get directions ↗WholesaleFlorida5060 N.E. 12th Ave, Oakland Park, FL 33334Get directions ↗WholesaleHawaiʻi91-226 Kauhi St #2D, Kapolei, HI 96707 · OʻahuGet directions ↗

WholesaleIndio45080 Golf Center Parkway, Suite G, Indio, CA 92201

Authorized partnerCalabasas24000 Ventura Blvd, Calabasas, CAGet directions ↗Authorized partnerSan Diego9072 Clairemont Mesa Blvd, San Diego, CA 92123Get directions ↗

Authorized partnerColoradoContact us for partner details

Project supportLos AngelesOrange CountySan DiegoBay AreaSacramentoLancasterRancho CucamongaIndioNationwide shipping

Call (888) 876-3006 All contact options

Mon to Fri, 9:00 AM to 5:00 PM

Let's plan your fence line.

Send your fence length, corners, gates and photos, and a specialist will come back with a material list and a project price.

Get a free quote Contractor pricing

Real projects

Installed by our customers

Completed installations by Aluglobus Aluminum Systems. Sizes, layouts and accessories vary by project.

ALU50 tongue-and-groove aluminum privacy fence panel structure

ALU50 powder-coated aluminum fence finish

ALU50 fence panel alignment and rigidity detail

Premium ALU50 aluminum fence construction

ALU50 T and G fence DIY installation context

ALU50 fence fabrication and installation context

Completed Aluglobus aluminum fence project

Watch

See it built and installed

Installation, product and factory videos from Aluglobus Aluminum Systems.

Specifications

Technical details

Check sizes, material and configuration against your project before ordering.

System: ALU50 T&G horizontal privacy fence
Kit size: 6′ W × 6.3′ H
Privacy: Interlocking tongue-and-groove profiles, gap-free
Material: 6063-T6 aluminum
Finish: AAMA 2604 powder coat
Kit contents: 11 pcs ALU 60 T&G slats 6 ft, 1 top rail 6 ft, 1 2-way post kit
Use: Residential and light commercial privacy fencing

FAQ

Questions, answered

Still deciding?

Send your measurements and photos. Our team will help you choose the right system and parts.

Request a quote

Does this fence have gaps between the boards?

No. Each ALU50 T&G profile locks into the next, so there are no intentional gaps between boards and you get a solid privacy surface.

What's included in the 6′ × 6.3′ kit?

The kit includes 11 T&G slats at 6 ft, one 6 ft top rail and one 2-way post kit. Confirm the end posts and mounting for your fence line with our team.

How many kits do I need for a longer run?

Each kit covers one 6 ft wide section. Measure your total run, divide it into 6 ft sections, and confirm the starting and end posts with our team.

Does the solid surface block wind and noise?

It has no openings, so you can't see through it. No tested sound-reduction or wind-load values are published for this kit, so get project engineering if wind exposure matters.

What upkeep does the fence need?

The aluminum profiles don't need painting, staining or sealing. Just clean them from time to time.

Ready when you are

Ready to start your project?

Order online or send your project details for a factory-direct quote.

Choose options Request a quote

Trusted by investors, architects, homeowners and contractors

Watch Plug ✔

"I couldn't be happier with the fence. From the moment it went up, it completely transformed my backyard. The sleek design without visible posts gives it such a modern, high-end look. It's like having a piece of art around my home. I also love that it's fire-resistant, which gives me peace of mind living in this area. Definitely worth every penny!"

Mike

Home Owner

CEO, Entrepreneur & Investor

DW Design & Build ✔

@dannywangdesign

"We're honored to be recommended by Danny Wang Design, a premier contractor known for exceptional outdoor living spaces. In our latest collaboration, Danny created a stunning backyard and entrusted us with the gate and fence system. We're proud to be his trusted partner for quality and reliability."

"AluGlobus was extremely helpful with my order, answering all my questions and delivering everything to Texas in perfect condition. The products were well-packed in a solid wood crate, and excellent quality. I'm so glad I found them online. Highly recommended. I'll be buying from them again. Thanks to everyone who made it happen!"

David

Customer

Service Department

Mercedes Benz Engineer

"We use Aluglobus 100% with every fence/gate job we have. As a contractor I can say they are working very hard and their product is the highest quality I can find and the best price. We're very happy working with them! Our experience working with them is always top notch."

22 July 2025

Shopping cart

Search

Aluminum Fence Kit Alu50 T&G 6' x 6.3'

Get the Highlights

Gap-free privacy

Strength across the panel

Built to stay new outside

Simple, repeatable assembly

The ALU50 T&G 6′ × 6.3′ privacy kit.

A horizontal aluminum fence kit for modern privacy

Two post systems. See every part.

ALU INTEGRAL™

ALU FRAME™

Same slats. Same finish. A real gate frame.

Where this fence fits.

Installed ALU20, ALU40 and ALU50/60 fences.

Aluminum is the raw material. The system is what you buy.

Want the wood look? Compare what is underneath.

Same color. Very different finish.

See where your fence is actually made.

No Factory Proof.No Manufacturing Transparency.No Warranty You Can Verify.

No Coating Brand.No Preparation Proof.No Finish Warranty You Can Verify.

Cutting, punching, milling, bending and finishing under one roof.

Engineered first. Manufactured in-house. Built with precision.

We show the process. So you know who stands behind the product.

Real fences. Real homes.

The best choice for your property line.

Real fences. Real reviews.

Narrow it down

See it built

More from the Aluglobus channel

Plan the run before you order.

Questions about this fence kit.

Buyer questions about the horizontal aluminum fence kit.

A gap-free aluminum fence built around an interlocking tongue-and-groove surface.

The complete visual sequence for profile structure, finish, alignment, aluminum construction, and installation.

A second six-image sequence for finish, components, fabrication, and completed-fence context.

Tongue-and-groove profiles remove the intentional gaps found in standard horizontal slat fencing.

Exterior aluminum performance without the maintenance cycle of painted or stained wood.

Corrosion-resistant aluminum

UV-stable finish direction

Weather-resistant system

Non-combustible material

Low maintenance

Interlocking rigidity

The interlocking format simplifies panel assembly while accurate supports control the final fence line.

Lay out the fence line

Install the approved supports

Establish the first profile

Interlock the ALU50 profiles

Secure & inspect the panel

Full-privacy aluminum fencing for residential, landscape, pool-area, and light-commercial projects.

Property-line fencing

Backyard enclosures

Garden & patio boundaries

Pool-perimeter layouts

Architectural privacy

Light-commercial screening

Four core reasons the system differs from a standard spaced-slat fence.

The product specifications that matter for planning the ALU50 T&G fence.

Additional factory-direct aluminum system and fabrication context.

Understand the T&G interlock, privacy, exterior performance, installation, and maintenance before ordering.

Choose the gap-free system when privacy is the priority.

Showrooms, wholesale and partners near you.

Let's plan your fence line.

Installed by our customers

See it built and installed

Technical details

Square post and C-channel fence system

Before you order

Questions, answered

Still deciding?

Ready to start your project?

Wholesale buyers get $150 OFF their order for a limited time.

FREE DIGITAL MAGAZINE

No Factory Proof.
No Manufacturing Transparency.
No Warranty You Can Verify.

No Coating Brand.
No Preparation Proof.
No Finish Warranty You Can Verify.