Alu 60 T&G 4x6 HD Pedestrian Gate 3D Single Swing SKP Wood like Ipe (Horizontal)

Alu 60 T&G 4x6 HD Pedestrian Gate Woodgrain Ipe

Alu 60 T&G 4x6 HD Pedestrian Gate Woodgrain Walnut

Alu 60 T&G 4x6 HD Pedestrian Gate Woodgrain Yellow Oak

View details

ALU 50-60 T&G Woodgrain 6×8 ft. Heavy-Duty Pedestrian Gate Kit – Single Swing – NO GAP

$2,030.12

Aluglobus Heavy-Duty Gate System

ALU50-60 T&G Woodgrain 6×8 Gate

The ALU50-60 T&G Woodgrain 6×8 Heavy-Duty Pedestrian Gate Kit is built
for larger single-swing openings where privacy, structural strength, and a
premium architectural finish matter. The system combines a heavy-duty
aluminum gate structure with interlocking tongue-and-groove infill to
create a clean, continuous surface with no intentional gap between profiles.

Its woodgrain appearance delivers the warmth of wood without relying on
natural wood as the structural gate material. Underneath the finish is
6063-T6 architectural aluminum, providing excellent corrosion resistance,
reduced maintenance, and dependable exterior performance in demanding
residential and commercial environments.

Gate Size
6′ × 8′

Gate Type
Single Swing

Infill System
ALU50-60 T&G

Slat Gap
No Gap

Material & Finish

Product Characteristics

Characteristics

Heavy-duty gate construction
Excellent corrosion resistance
Lightweight compared with many steel systems
Low-maintenance exterior performance
Woodgrain architectural appearance
Continuous no-gap privacy design

Material

6063-T6 architectural aluminum with USA-made
material specification.

Infill System

ALU50-60 tongue-and-groove aluminum profiles
interlock to create a continuous horizontal surface without the
intentional spacing used in traditional slat gates.

Paint

AAMA 2604 architectural finish specification using
Cardinal Paint / TIGER.

Coating

Architectural powder-coating process designed for demanding exterior
applications and long-term finish performance.

Construction Type

Non-combustible aluminum substrate with a decorative woodgrain
architectural finish.

Colors

Woodgrain and additional custom finish options are available.

Sizes

Custom sizes are available in addition to standard gate configurations.

Fire Characteristics

Non-Combustible Aluminum

Combustibility
Non-combustible aluminum metal substrate

Ignition
Does not burn under normal fire conditions

Approx. Melting Range
615–655°C

Smoke Developed
0 for the aluminum substrate

Built for privacy:
the ALU50-60 tongue-and-groove profiles interlock instead of leaving a
3/8-inch or 1/2-inch reveal, creating a much more private and continuous
architectural gate surface.

Wood look, heavy-duty aluminum structure:
the woodgrain finish delivers the visual warmth of wood while the underlying
gate remains aluminum, helping reduce concerns related to rust, rot,
staining, and routine wood maintenance.

Large single-swing gate:
because this is a 6×8 heavy-duty gate leaf, final hinge support, structural
mounting conditions, swing clearance, lock hardware, finished dimensions,
and site conditions should be verified before fabrication or installation.

Code-sensitive projects:
aluminum is a non-combustible metal substrate. Requirements for the complete
assembly, decorative finish, attachments, adjacent materials, clearances,
and project-specific conditions should be confirmed where applicable.

OPTIONAL ADDITIONS

Choose Posts & Caps

Select only the additional components required for your gate installation.

OPTIONAL

3x3 in. x 8 ft. HD Square Post (.090 Thk) - Black

$135.00

3x3 in. x 8 ft. HD Square Post (.090 Thk) - Custom Color

$175.50

3x3 in. x 12 ft. HD Square Post (.090 Thk) - Black

$203.00

3x3 in. x 12 ft. HD Square Post (.090 Thk) - Custom Color

$263.90

Add to cart

Buy Now

Categories: Aluminum Gates, Aluminum Gates - Alu50-60 T&G, Gates, Pedestrian Single Swing Gate

Description

Product Description

Aluglobus Aluminum Systems · Heavy-Duty Contractor Line

A 6×8 privacy gate needs more than a good-looking infill.

The ALU 50-60 T&G Woodgrain 6×8 Heavy-Duty Pedestrian Gate is a large-format single-swing aluminum gate built around a structural frame, full-privacy tongue-and-groove infill, reinforced hinge support, and an architectural woodgrain finish. It is intended for projects where the gate must feel substantial, stay aligned, and coordinate with modern aluminum fence systems.

6' × 8' listed size Single swing No-gap T&G privacy Woodgrain aluminum Heavy-duty frame

See the engineering Check your opening

6×8 · single leaf · no gap

ConfigurationSingle-swing pedestrian gate

Privacy systemALU 50-60 T&G, no intentional slat gaps

Primary material6063-T6 architectural aluminum

Frame4" heavy-duty aluminum system

Hinge support5" heavy-duty 2-way hinge

Technical overview

At 6 feet wide and 8 feet tall, the hinge side becomes the project.

A tall single leaf creates more leverage at the hinges than a smaller pedestrian gate. The finished result depends on the frame staying square, the hinge-side support staying plumb, and the latch side being planned around the real opening rather than a nominal number.

Planning note: The product is sold as a 6×8 Heavy-Duty single-swing gate kit. Confirm finished opening dimensions, hinge-side structure, swing direction, ground clearance, latch conditions, wind exposure, and local requirements before ordering or installing.

Product family: ALU 50-60 Tongue & Groove Woodgrain
Listed configuration: 6' wide × 8' high, single swing
Privacy: No-gap interlocking T&G infill
Gate line: Heavy-Duty / Contractor Line pedestrian gate
Primary alloy: 6063-T6 architectural aluminum
Main frame system: 4" heavy-duty aluminum gate frame
Hinge system: 5" heavy-duty 2-way support hinge
Finish family: Woodgrain architectural aluminum finish
Powder-coat specification: AAMA 2604 Cardinal / TIGER architectural finish system
Material behavior: Aluminum substrate is non-combustible and corrosion resistant

01 · LEVERAGE

A taller leaf increases demand at the hinge side.

Gate height and width both increase the leverage acting on hinges and their mounting structure. The post, wall, or column must be appropriate for the actual installation.

02 · SQUARE

Frame geometry controls how the gate closes.

Keep the structural frame square during assembly and hanging. Small errors become more visible across a large leaf and can affect latch alignment and perimeter clearances.

03 · CLEARANCE

Nominal size is not the finished opening.

Hinges, latch hardware, posts, wall conditions, ground clearance, and installation tolerances all influence the opening required for the gate to operate correctly.

System anatomy

The woodgrain is the finish. The aluminum system does the work.

This gate is designed to deliver the visual warmth of wood without relying on wood as the structural material. The performance comes from the aluminum frame, interlocking T&G infill, reinforced hinge support, and exterior-grade finish system.

Structural perimeter

4" heavy-duty gate frame

The perimeter frame gives the single leaf a structural backbone and provides the mounting interface for the hinge and latch sides.

Privacy infill

ALU 50-60 T&G no-gap profile

Interlocking tongue-and-groove boards create a continuous face without deliberate spacing between the infill profiles.

Hinge support

5" heavy-duty 2-way hinge

The current gate package uses heavy-duty hinge support intended to handle repeated daily movement on the larger leaf.

Exterior finish

Woodgrain over architectural aluminum

The gate reads visually like wood while retaining the corrosion resistance and low-maintenance behavior of aluminum beneath the decorative finish.

Privacy without wood maintenance

A solid architectural face, without rot, swelling, or seasonal board movement.

Traditional wood can move with moisture and weather. The ALU 50-60 T&G system uses aluminum profiles to create a wood-look gate with a tighter, more predictable exterior surface. Perimeter visibility still depends on the final posts, latch clearances, hinge clearances, and site conditions.

Gate package

Core components are built around the Heavy-Duty frame system.

The current product configuration uses the Aluglobus heavy-duty gate-frame family with T&G woodgrain infill and reinforced hinge hardware. Exact cut lengths, quantities, post selection, lock hardware, and site-specific accessories should be confirmed for the 6×8 opening before installation.

Post options: Current product information lists 2", 2.75", and 2"×3" post options. The correct support depends on the actual site and mounting condition, especially on a tall 6×8 single leaf.

4" HD aluminum gate frameMain structural perimeter members.

Inner corner bracketsFrame connection and alignment components.

Channel componentsInterface pieces used with the gate-frame system.

ALU 50-60 T&G woodgrain infillInterlocking no-gap privacy boards.

5" heavy-duty 2-way support hingeReinforced hinge hardware for the swing leaf.

Gate stopper / L-shape componentClosing-side support component listed with the gate package.

Aluminum cap componentsFinish pieces for compatible post/frame conditions.

Assembly fastenersGate-frame screw set and required connection hardware.

Installation planning

Five checks before the first hole is drilled.

A heavy-duty kit reduces fabrication work, but it does not remove the need for accurate site planning. For a 6×8 single-swing leaf, these checks should happen before assembly and hanging.

Opening

Measure the finished clear opening at multiple points and identify any taper or out-of-plumb condition.

Hinge side

Confirm whether the hinge mounts to an aluminum post, structural wall, column, or other approved support.

Swing path

Check grade, walls, landscaping, steps, and other obstructions through the complete swing arc.

Latch side

Plan the catcher, latch, lock, stop, and closing clearance before setting final gate position.

Final alignment

Hang the leaf plumb, confirm uniform perimeter clearances, then make final hinge and latch adjustments.

See the system

The difference is easier to understand when you see how the gate is built.

Watch the Aluglobus gate-system video to see the construction philosophy behind the frame, infill, connection details, and factory-direct approach.

Video: Aluglobus gate-system overviewOpens inline after click

Where it fits

A large pedestrian gate for projects that need height, privacy, and a stronger architectural presence.

Side-yard entries

Useful where a standard narrow pedestrian gate feels undersized for the architecture or equipment access.

Private courtyards

The no-gap face creates a more controlled visual transition between public and private exterior spaces.

Custom residential projects

Woodgrain aluminum can coordinate with warm exterior palettes while keeping the structural system metal.

Contractor packages

Factory-direct frame, infill, and hardware families help installers build coordinated fence-and-gate packages.

Material strategy

Wood look does not mean wood construction.

The substrate is aluminum, which is non-combustible and does not provide fuel in the way combustible wood products do. That makes aluminum useful when a project is intentionally reducing combustible exterior materials.

Zone Zero and code-sensitive projects: Material choice is only one part of compliance. The complete installation can include coatings, hardware, adjacent fencing, vegetation, structures, clearances, attachments, and site-specific conditions. Confirm applicable local requirements with the project professional or authority having jurisdiction.

Care: Wash the finished aluminum periodically with water and an appropriate mild cleaner. Avoid harsh abrasives. Inspect hinges, fasteners, stops, latch hardware, and alignment as part of normal gate maintenance.

Frequently asked questions

Questions to answer before choosing the 6×8 Heavy-Duty gate.

Is this gate actually wood?

No. It is an aluminum gate with a woodgrain architectural finish. The goal is to provide the visual warmth of wood while retaining the corrosion resistance and lower-maintenance behavior of aluminum.

What does “no gap” mean on the ALU 50-60 T&G system?

The tongue-and-groove infill interlocks so there is no intentional reveal between adjacent boards. Final privacy around the perimeter still depends on hinge clearances, latch clearances, posts, and the finished site condition.

Why use the Heavy-Duty version for a 6×8 gate?

A 6-foot-wide by 8-foot-high single leaf creates more leverage at the hinge side than a smaller pedestrian gate. The Heavy-Duty line is built around a stronger frame and reinforced hinge approach for projects that need a more substantial gate assembly.

Can I install this gate myself?

Experienced installers and capable DIY builders can assemble gate systems, but a 6×8 single leaf is large and requires accurate support, alignment, clearances, and safe handling. Professional installation is recommended when the hinge-side structure or site conditions are uncertain.

What should I measure before ordering?

Measure the finished opening width and height, identify the hinge side and swing direction, check grade and swing clearance, document the support structure, and plan the latch or lock condition. Photos of both sides of the opening are also useful for project review.

Is aluminum suitable for non-combustible material strategies?

The aluminum substrate is non-combustible. Whether a complete gate and surrounding project meet a particular Zone Zero, defensible-space, or code requirement depends on the full assembly and local rules.

Project checkpoint

Do not guess on a 6×8 single leaf.

Send the actual opening, hinge side, swing direction, site photos, and project location. Aluglobus can help confirm the right gate package before material reaches the job site.

01Opening width + finished height

02Hinge side + support condition

03Swing direction + clearance

04Latch / lock requirement

05Photos from both sides

06Project city / state

Trusted by investors, architects, homeowners and contractors

Watch Plug ✔

@watchplug

"I couldn't be happier with the fence. From the moment it went up, it completely transformed my backyard. The sleek design without visible posts gives it such a modern, high-end look. It's like having a piece of art around my home. I also love that it's fire-resistant, which gives me peace of mind living in this area. Definitely worth every penny!"

Mike

Home Owner

Daymond John

CEO, Entrepreneur & Investor

DW Design & Build ✔

@dannywangdesign

"We're honored to be recommended by Danny Wang Design, a premier contractor known for exceptional outdoor living spaces. In our latest collaboration, Danny created a stunning backyard and entrusted us with the gate and fence system. We're proud to be his trusted partner for quality and reliability."

Jim Monahan

★★★★★

"AluGlobus was extremely helpful with my order, answering all my questions and delivering everything to Texas in perfect condition. The products were well-packed in a solid wood crate, and excellent quality. I'm so glad I found them online. Highly recommended. I'll be buying from them again. Thanks to everyone who made it happen!"

David

Customer

Service Department

Mercedes Benz Engineer

Valley One Gates & Access

"We use Aluglobus 100% with every fence/gate job we have. As a contractor I can say they are working very hard and their product is the highest quality I can find and the best price. We're very happy working with them! Our experience working with them is always top notch."

22 July 2025

Shopping cart