StruXure Pergola Cost in 2026: Prices by Size and a Factory-Direct Alternative

StruXure pergolas cost about $150 to $200 per sq ft installed, or $15,000 to $20,000 for 10 x 10 ft. See prices by size, what a dealer quote covers, and ALU TANK™ listed prices.
Black ALU TANK louvered pergola over deck dining and lounge seating by the pool in Hidden Hills, CA
Plan Your Patio Cover or Pergola Today!
Get a factory-direct quote for your aluminum patio cover or pergola, with engineering packages for permits. Send your size and photos and we plan it with you.

On This Page

Updated November 2026 · StruXure figures from published third-party estimates; Aluglobus prices from our live product pages

Short answer: Published estimates put a StruXure pergola at about $150 to $200 per square foot installed: roughly $15,000 to $20,000 for 10 × 10 ft and $36,000 to $48,000 for 12 × 20 ft (HomeGuide). StruXure does not list prices; a local dealer quotes each project. For comparison, our ALU TANK™ motorized louvered pergola is listed at $10,050 for a 10 × 10 ft material package, with freight and installation quoted separately.

StruXure is one of the best-known motorized louvered pergola brands in the U.S. It sells Pergola X through local dealers, who measure, design, quote and install each system, which is why you will not find a price list on its website. Below are the published installed-cost estimates by size, what a dealer quote usually covers, what the StruXure price buys you, and how it compares with the listed prices for ALU TANK™, the motorized louvered pergola we make. We compete with StruXure, so every StruXure number on this page links to its source.

How much does a StruXure pergola cost in 2026?

HomeGuide puts StruXure pergolas at $150 to $200 per square foot installed. Applied to common sizes, that gives the ranges below. These are installed prices: they include the dealer’s installation.

StruXure sizeRoof areaEstimated cost, installed
8 × 8 ft64 sq ft$9,600 – $12,800
10 × 10 ft100 sq ft$15,000 – $20,000
12 × 12 ft144 sq ft$21,600 – $28,800
12 × 16 ft192 sq ft$28,800 – $38,400
12 × 20 ft240 sq ft$36,000 – $48,000
16 × 16 ft256 sq ft$38,400 – $51,200
16 × 20 ft320 sq ft$48,000 – $64,000
20 × 20 ft400 sq ft$60,000 – $80,000

Source: HomeGuide. Other estimates differ. The Luxury Pergola, another louvered pergola seller, puts a 12 × 16 ft StruXure at about $45,000 installed (about $198 per sq ft), and Angi’s brand table lists StruXure at $60 to $180 per sq ft. Treat any figure as a starting point until a dealer measures your site.

Why StruXure does not publish a price

In its own cost article, StruXure says every Pergola X is custom-made, so it cannot give a one-size purchase price until the space is measured. It sends buyers to a local dealer for a quote, and points to its Cabana X configurator for a standard 10 × 10 ft cabana.

Under a dealer model, the price you see bundles the system, the dealer’s design time, installation labor and the dealer’s margin, and it varies by region. That is not a criticism: it is how most premium louvered pergola brands sell. It does mean two buyers in different cities can get very different quotes for the same size.

What a StruXure dealer quote usually covers

StruXure and HomeGuide list the same main price drivers. Expect your quote to depend on:

  • Size and layout. A single 10 × 10 ft zone costs more per square foot than a large or multi-zone layout, but less in total.
  • Model. HomeGuide lists Pan 6, Pivot 6, Pivot 6 XL and Pivot 6 Slide, with the premium models costing more per square foot.
  • Finish. Six standard powder-coat colors; custom colors and wood-grain finishes cost extra.
  • Options. Privacy screens, lighting, fans, heaters and built-in sound.
  • Site and installation. Footings, terrain, landscaping changes, electrical work and permits.

Ask the dealer to show each of these as a separate line, so you can compare it with any other quote.

What the StruXure price buys you

A higher price is not automatically a worse deal. Here is what StruXure offers that you should weigh fairly:

  • One company for the whole project. StruXure pergolas are installed by its network of licensed and certified contractors (HomeGuide), so the dealer handles design, permit and installation.
  • A published code evaluation. Pergola X holds an ICC-ES evaluation report (ESR-5321P).
  • Weather performance. StruXure states that its Pivot 6 louvers rotate 155° and were tested to 150 mph when fully open (StruXure).
  • Warranty. A transferable limited lifetime warranty on manufacturing defects (StruXure FAQ). HomeGuide lists component terms of 15 years for support components, 10 years for manual system components and 5 years for power components such as the motor and controls. Ask your dealer for the written terms.

If you want a single dealer to own the whole job, that is real value, and part of what the price pays for.

StruXure vs ALU TANK™: price by size

ALU TANK™ is our motorized louvered pergola, made in our Southern California factory and sold factory direct at listed prices. The sizes below match the StruXure estimates above.

SizeStruXure, installed (estimate)ALU TANK™, material package (listed)
10 × 10 ft$15,000 – $20,000$10,050
12 × 16 ft$28,800 – $38,400$15,800
16 × 20 ft$48,000 – $64,000$20,660
Per square foot$150 – $200 installedabout $65 – $101, material only
Read this before comparing: the two columns are not like-for-like. The StruXure figures include installation. The ALU TANK™ prices are the standard material package only: freight, footings, electrical work, permits and installation are extra and depend on your site.
Freestanding black ALU TANK louvered pergola in a garden patio in front of the house, Hidden Hills, CA
Freestanding ALU TANK™ motorized louvered pergola in a garden setting, Hidden Hills, CA.

ALU TANK™ uses motorized 8 inch aluminum louver blades, spans up to 24 ft with louver bays up to 14 ft, and carries a 30-year blade and 25-year limited system warranty (terms apply). See all packages and specs on the ALU TANK™ louvered pergola page, or compare every Aluglobus system in the aluminum and louvered pergola cost guide.

What to add to a material-package price

To compare an ALU TANK™ package with an installed StruXure quote, get a price for each of these items from your installer and add them to the package price:

  • Freight to your job site or warehouse, quoted with your order.
  • Footings or concrete for the posts.
  • Installation labor by your contractor, or by one of our authorized installer partners where available.
  • Electrical work by an electrician for the motor and any lights.
  • Permits and engineering. We offer engineering packages for permits, which you can add to your quote.
  • Options such as lights, fans, heaters and screens, which are add-ons on both brands.
  • Sales tax.

Once those lines are in, you have a true installed total to set against a dealer quote.

How to compare two louvered pergola quotes

  • Installed or material only? Make sure both totals include the same things.
  • Same size and layout? Freestanding vs attached, number of zones and post positions all change the price.
  • Blade size and spans. Ask each seller for blade width, maximum span and bay size in writing.
  • Warranty by component. Structure, finish, motor and electronics often have different terms.
  • Engineering and permits. Ask who provides the engineering and what your city will require.
  • Who installs and who services it. Know who you call if the motor needs attention in year three.
  • Options included. Lights, sensors, screens and heaters are often priced separately.
  • Lead time. Get the production and delivery estimate in the quote.

StruXure or ALU TANK™: which should you choose?

StruXure fits if you want one dealer to design, permit and install the whole system, you value a published ICC-ES report and a transferable limited lifetime warranty, and your budget works at roughly $150 to $200 per square foot installed.

ALU TANK™ fits if you want to see the price before you call, need a custom size or a long span, already have a contractor or want to manage the installation, or want an engineering package for your permit as part of the order.

Aerial drone view of a black ALU TANK louvered pergola over a patio lounge and dining area, Hidden Hills, CA
Aerial view of a freestanding ALU TANK™ louvered pergola over a patio lounge, Hidden Hills, CA.

Still deciding between brands? Our best louvered pergolas of 2026 guide compares seven systems on specs, not just price.

Get your ALU TANK™ price

Pick a package size and options on the ALU TANK™ page for your starting price, or send us your layout and photos for a full quote with freight and engineering.

Call 818-835-8193 · Text or WhatsApp 424-522-2143

StruXure pergola cost FAQ

How much does a StruXure pergola cost?

Published estimates put a StruXure pergola at about $150 to $200 per square foot installed: roughly $15,000 to $20,000 for 10 x 10 ft and $36,000 to $48,000 for 12 x 20 ft (HomeGuide). StruXure does not list prices; a local dealer quotes each project after measuring the site.

Why does StruXure not list its prices?

StruXure says every Pergola X is custom-made, so it cannot give a one-size purchase price until the space is measured. Pricing comes from a local dealer, and it includes the dealer’s design, installation and margin.

What warranty does StruXure offer?

StruXure lists a transferable limited lifetime warranty on manufacturing defects. HomeGuide lists component terms of 15 years for support components, 10 years for manual system components and 5 years for power components such as the motor and controls. Ask your dealer for the written terms.

Is there a lower-cost alternative to a StruXure pergola?

Factory-direct systems with listed prices usually cost less. The ALU TANK™ motorized louvered pergola is listed at $10,050 for a 10 x 10 ft material package, $15,800 for 12 x 16 ft and $20,660 for 16 x 20 ft; freight, footings, electrical work, permits and installation are extra.

Does Aluglobus install ALU TANK™?

Aluglobus supplies ALU TANK™ factory direct, either supply only or with installation where available. Contractors get installation and assembly guidance with the package, and engineering packages for permits can be added to the quote.

Is ALU TANK™ made by StruXure?

No. ALU TANK™ is designed and made by Aluglobus Aluminum Systems in Southern California. Aluglobus is not affiliated with StruXure.

Sources

StruXure and Pergola X are trademarks of their owner. Aluglobus Aluminum Systems is not affiliated with StruXure. Third-party estimates change; confirm current pricing with a StruXure dealer.

logo forabout uis |  | Aluglobusfence.com

FACTORY-DIRECT
ALUMINUM SYSTEMS

Gates • Fences • Patios • Cladding

Built for contractors.
Supplied for real projects.

Direct manufacturer.
Nationwide supply.

Get Wholesale Pricing

Contractor or dealer pricing, or our full e-catalog. Tell us what you need and our wholesale team will get back to you.

Request a call
Just leave a request and we will provide you with professional advice.
Aluglobus Aluminum Systems (White)

Get a free quote for your project.

Factory-direct aluminum fences, gates, patio covers and cladding. Send your sizes or a short description and our team will get back to you with pricing.

No obligation. Real people, real factory pricing.

10% off Premium Aluminum Woodgrain Collection

Limited Promotional Inventory

CONTRACTORS ONLY

Claim Your 10% Off

Send us your information and our team will help you check available woodgrain colors, profiles and current promotional inventory.

Valid on qualifying projects only. Minimum project value required. Restrictions may apply.