Preparation: Verifying Parts and Supplies Before Installation
Read the manual first. The first page will have all your parts listed by name and also quantities, so you know what you have and if you’re missing anything. Don’t start the project before you get all the supplies. This all comes in the kit, so everything you need is included.
Foundation Setup: Leveling and Aligning the First Post
Get your footing level and set your first post in concrete. This will be your starting point. From there, draw a string line to the next post. This will help maintain the alignment and level of your fence. Make sure to follow the footing requirements of your city, as every city and state has different regulations. Check your city code online as it’s public information and easy to access.
Design Your Ideal Fence & Gates Today!
Bracket Installation: Securing and Leveling Posts with Two-Hole Brackets
Next, take the two-hole bracket, which will help you level and secure the post. Slide it into place, and use the screws included in the kit to attach it. This bracket will act as your stopper and level guide. Make sure everything is aligned before tightening the screws fully, as this will ensure the stability of your fence.
Base Plate Application: Anchoring Posts for Wall-Mounted and Non-Footing Installations
If you're using a base plate, here’s how to install it. The base plate is a thick 3/8 aluminum piece, powder-coated black to match the posts. It comes with pre-drilled holes and stainless steel screws. Attach the base plate to the post, but don’t tighten the screws completely until all the screws are in. This method is useful when you can’t use concrete, such as on walls or in areas where footing isn’t possible. We recommend using base plates for shorter fence heights, typically no higher than four feet.
Design Your Ideal Fence & Gates Today!
Panel and Rail Assembly: Fitting and Securing Pre-Cut Vinyl Boards
Now, we’ll set up the panels and rails. The boards are pre-cut to fit the exact size of the fence system. Start with the bottom rail, sliding it into place and securing it with the stainless steel bracket included. Next, unwrap your vinyl panels. These are custom-made for our kits and are slightly heavier for added durability. Slide each panel into the groove, ensuring it fits snugly. If a client prefers no gaps, you can adjust the brackets accordingly, but remember to use screws to secure everything. It’s a simple process, like assembling Lego pieces, and it goes quickly once you have the posts in place.
Top Rail Installation: Securing Top Rails for Stability and Heat Expansion
Next, we’ll install the top rail. The top rail is similar to the bottom but has a flat surface for a clean finish. Slide it into the pre-cut grooves, making sure it aligns properly. Before securing, insert the small stainless steel brackets into the channel; these will prevent the rail from moving and allow for expansion with heat. Once the rail is in place, use the screws provided to secure it, ensuring it’s tightly fastened but still able to expand slightly if needed.
Design Your Ideal Fence & Gates Today!
Final Adjustments: Adding Cap Fittings and Post Covers for a Professional Finish
Once all panels and rails are in place, it’s time for the final adjustments. Measure from the top of the post to the end of the rail, and cut the post cap accordingly. The post cap is designed to fit securely and provide a clean, professional look. Next, slide the post cover into place; it comes pre-cut for a perfect fit. This cover not only enhances the appearance but also protects the post. Finally, secure everything by pressing the pressure cap into the post, ensuring a tight and stable finish. Your fence is now complete and ready for use.
Achieving a Professional Fence Installation with Ease
Installing your own aluminum vinyl fence has never been easier with Al Globus DIY fence kits. Our step-by-step process ensures that even if you're new to fence installation, you can achieve professional results with minimal tools and effort. Here's a quick recap of how simple it is:
Preparation: Start by checking that all parts are included in the kit and in good condition. Follow the manual to verify everything before you begin.
Foundation Setup: Establish a strong foundation by leveling the footing and setting the first post in concrete. Use string-lining for precise alignment, ensuring your fence is straight and stable from the start.
Bracket Installation: Secure your posts with two-hole brackets, which keep everything level and stable, setting you up for a seamless build.
Base Plate Application: For walls or areas where concrete footing isn’t possible, our base plates provide a sturdy alternative, allowing for flexible installation options.
Panel and Rail Assembly: Our pre-cut vinyl boards and channels fit together effortlessly, making it quick and easy to assemble the panels and rails. It’s as simple as putting together Lego pieces, ensuring your fence goes up in no time.
Top Rail Installation: Secure the top rails with our specialized brackets that allow for material expansion, guaranteeing long-term durability and stability.
Final Adjustments: Complete the installation by fitting the post caps and covers for a clean, polished look that enhances the aesthetic appeal of your property.
With our premium, DIY-friendly kits, you can transform your outdoor space with a modern, sleek fence that’s built to last. Our products are designed with homeowners and contractors in mind, offering unbeatable quality, nationwide shipping, and technical support whenever you need it.
Ready to get started? Visit us and choose the perfect fence kit for your project today. Experience the satisfaction of building your own fence with ease and confidence—Alu Globus has you covered!